ON STRIKE - OFF STRIKE Here is a resistivity map - older regional - scad
https://ml.globenewswire.com/Resource/Download/f07e9f8d-5bc2-461b-9c33-ad91d4b2ff6e?size=3
- zoom in ( 200+ ) then, get your magnify glass out
- locate scad mine
- notice the scale - 5,000m - notice smaller scale block = 625m
- you should see - green - swirl right side of scad
-- zoom right in on scad
- notice monaco ( red ) with bristol ( breccia ) pink
- what's the strike degree ?
- i'd say = 70 degrees
Do the color ressitivity strikes above... go straight north like this pic ?
https://macdonaldmines.com/wp-content/uploads/2020/06/Fig.-3-North_Pit_DDH_Highlights_.png
NOPE - the 1st resistivity map strike = runs on a 70 degree north angle.
The white dot over scadmine in 2st resistivity map - would represent approx 625m
If one zoomed in close enough - they'd have seen the pink immediate left of scad - which is
in red - and striking 70 degrees - NORTH....
Now...if BMK was having good dril lhits - near north pit...
Why would they run to the Villeneuve ?
I would like to see all core pics...of where gold was present.
Was it true solid iron ores with gold ?
Was it desimated irons with chlorite gold ?
My own guesstimates ?
Gold is in the desimated - blazing orange swath - extreme right
https://macdonaldmines.com/wp-content/uploads/2020/06/Figure1-Plan_Map_Metal_Factor_200615.png
OR
Gold is in the - red color resistivities - i would personally stick to - this resistivity map for refernce - running with the 70 degrees - striking norrth
https://ml.globenewswire.com/Resource/Download/f07e9f8d-5bc2-461b-9c33-ad91d4b2ff6e?size=3
This plotting map - makes no sense at all - if one were to reference the 70 degree map.
https://macdonaldmines.com/wp-content/uploads/2020/06/Fig.-3-North_Pit_DDH_Highlights_.png
If the villenueve was drilled 400m away step out from scad -
It would have cusped the 70 degree angle - fringing the red path...
Question becomes - does BMK knowof the 70 degree resistivity strike ?
If so...why run with a 90 degree true north - plot ?
Cheers....
Just my own observation.
Not investment advice.
Do your own DD.
i maybe entirely wrong - but then again...
I maybe entirely right.
Oh....one mre thing,
Has BMK ever performed an ore characterization ?
JIusrt what exactly is the percentage content of iron - whren gold is found ?
Is it desimated irons = reconsolodated - or - solid iron ore ?