TORONTO, July 26, 2018 (GLOBE NEWSWIRE) -- YAMANA GOLD INC. (TSX:YRI) (NYSE:AUY) (“Yamana” or “the Company”)
herein provides a mid-year 2018 exploration update for select properties within its portfolio, namely Jacobina, Chapada, Minera
Florida, El Peñón, Cerro Moro and Lavra Velha.
HIGHLIGHTS
Jacobina
- Exploration drilling has demonstrated the potential to add significant new, near mine shallow inferred mineral
resources, namely in the new Serra do Corrego area, at grades higher than existing mineral reserves;
- The exploration program is on track to increase mineral reserve and mineral resource grades; and
- The regional surface exploration program within the Company’s expansive land package has identified several
priority targets, including João Belo Sur, Santa Cruz and Barrocao, which show significant promise for further mineralized reefs
based on surface samples and historical workings.
Chapada
- The drill program at Suruca is expanding the inferred sulphide mineral resource, including in a newly discovered hanging wall
zone;
- Drilling at the Baru and Sucupira targets is providing additional mineral resources in the pit wall at
Chapada;
- A new, 500-metre long copper and gold mineral system was discovered at the Santa Cruz target along the
Northeast-Southwest direction with mineralization related to high density, A-type quartz veins and biotitic hydrothermal
alteration, similar to those found at Corpo Sul; and
- Drilling at Hidrotermalito, located within two kilometres of Chapada, is returning positive results with grades
higher than the existing Chapada mineral reserves.
Minera
Florida
- The expansion of Fantasma, PV Sur and Don Leopoldo systems in the Pataguas area is continuing to demonstrate the
prospectivity of the new Agua Fria concessions;
- Infill intercepts of several high-grade veins, including Centenario Sur and Maquis Clavo II, continue to provide
new high-grade reserves in the core mine area; and
- Newly discovered veins are expected to be drill tested by the regional program later in 2018.
El Peñón
- Infill drilling continues to replace production depletion through conversion of inferred mineral resources to
measured and indicated mineral resources, while the exploration program continues to identify new structures in the core mine
area, which are expected to increase the mineral inventory and potentially extend the mine life.
Cerro Moro
- Infill drilling on the newly discovered Veronica vein is adding measured and indicated mineral resources and is
expected to provide mine life extensions;
- The mine exploration program is targeting several new near surface veins that have been identified through mapping
and geochemistry; and
- The district exploration program is advancing with detailed mapping, geophysics and geochemistry aimed at defining
new drill targets for the 2019 exploration program.
JACOBINA, BRAZIL
Results to date suggest a possible increase in mineral reserve grade at Canavieiras and João Belo, while
exploration drilling results are expected to provide new inferred mineral resources at greater than LOM grade due to the discovery
of new mineralized reefs in the near-mine area of Serra do Corrego. New targets within the Yamana land package continue to
demonstrate the potential of this asset, both to sustain production in the long term and to deliver opportunities for higher
grades.
The goals of the 2018 exploration program at Jacobina are:
- Test areas for higher-than-reserve grade mineralization with a focus on targets near existing infrastructure;
- Drilling to optimize geologic constraints; and
- Explore broader land package in recognition of the prospectivity of the Yamana-controlled concessions.
The Jacobina gold mine is located in the east central section of Bahia State of Northern Brazil. The
gold deposits at Jacobina are hosted within the southern sector of a north-south aligned belt comprised of Paleoproterozoic age
conglomerate, schist and quartzite that extend for over 200 kilometers. The Company owns contiguous mining concessions for over 80
kilometres of this belt. Exploration efforts are primarily concentrated on targets proximal to current operations, though for
2018 the program also includes work on the broader land package.
During the first half of 2018, 5,120 metres of drilling was completed toward the goal of identifying and testing
higher-than-reserve grade mineralization with a focus near existing mine infrastructure. Since Jacobina already has mineral
reserves that support a long mine life, one of the primary objectives is to enhance this through a focus on higher grades. In
particular, work has centred on Serra do Corrego to test the extensions of mineralization up dip towards surface. This potential
has been confirmed with the 2018 drill program and represents a significant discovery. The mineralization is both shallow, hosted
in the upper 200 metres, and near existing infrastructure (Figure 1). Consequently, the Company is targeting inclusion of this up
dip extension into year-end 2018 inferred mineral resources. In the second half of 2018, the Company will test if a similar setting
exists directly along strike at Morro de Cuscuz. Selected highlights are presented in Figure 2.
During the first half of 2018, 8,719 metres of drilling was completed to upgrade mineral resources (all
categories) at Canavieiras, Morro do Vento and João Belo. At João Belo, the program has further validated the existing block model
in the drilled areas for the LVL, LMPC and MPC reefs while the results (Figure 3) indicate the potential for higher grades in the
LVL and LMPC reefs. These intercepts are at the deepest levels at João Belo.
At Morro do Vento (Figure 4), results to date are confirming the mineral resource model (all categories) in all
reefs and at Canavieiras drill results for the Maneira reef (Figure 5) have intersected higher grade intersections and thicker
zones.
On the regional front, the conglomerate sequence that hosts the mineralized bodies continues for 15.5 kilometres
on the Company’s property. Along this sequence several areas have been identified as priority targets. In particular,
the João Belo Sur, Santa Cruz and Barrocao targets show promise for further mineralized reefs based on surface samples and historic
workings. Scout drilling, with a priority on the João Belo Sur target, is expected to identify opportunities to expand the
mineral envelope. Work will continue on these targets in late 2018.
CHAPADA, BRAZIL
Results to the end of the second quarter support the potential for inferred and measured and indicated mineral
resource expansion at both Suruca and Sucupira/Baru by year end. The discovery of higher grade mineralization at Hidrotermalito may
provide additional inferred oxide mineral resources as well as higher grade near mine inferred sulphide mineral resources. New
intercepts at Santa Cruz indicate continuity of the Corpo Sul system to the southwest with new intercepts of stockwork
mineralization.
The goals of the 2018 exploration program at Chapada are as follows:
- Targeted exploration to test and delineate opportunities for higher grade gold and copper mineralization;
- Focus on identifying near-mine inferred mineral resources, both for oxide and sulphide mineralization; and
- Follow up on regional targets to outline future opportunities for growth.
The Chapada complex has mineral reserves that support a mine life in excess of 20 years. Given this long
mine life the primary focus of the exploration program is on increasing gold grades in new inferred mineral resources.
Throughout the first half of 2018, the Company completed 14,778 metres of drilling in support of this objective, with drilling
focused on Suruca, Sucupira, Baru, and Santa Cruz.
At Suruca, drilling has been focused on four primary targets:
1) Undrilled shallow areas outside of the inferred mineral resource envelope – drilling has confirmed
mineralization with thicknesses and grades comparable with the existing resource and is expected to lead to an increase in inferred
mineral resources;
2) Northeast extension - successful intercepts have expanded the mineral envelope to the northeast indicating the system is still
open with the potential for additional focused drilling to expand the shallow inferred mineral resources;
3) Downdip extension - all completed drill holes have intersected higher grade zones such as SU-1018 with 66 metres of 0.9 grams
per tonne (“g/t”) of gold, extending the mineral envelope to the NW;
4) Hangingwall target - Hole SU-1000 intersected a new mineralization zone intercepting 138 metres at 0.45 g/t gold, including 42.7
metres of 1.05 g/t gold, hosted in Suruca hanging wall rocks. This suggests the potential for another mineralized zone within
the Suruca system, which is expected to be followed up later in 2018.
The work completed to date is expected to increase inferred mineral resources and indicates that the mineral
envelope continues to expand. Cross sections of Suruca and drill highlights from the first half of 2018 are shown in Figures 7 and
8. Overall, Suruca continues to support the Company’s view of a large mineral system that contains both oxide and sulphide
mineralization. As these mineral resources expand further, Suruca is expected to provide optionality with respect to future
development scenarios.
At Sucupira, drilling completed to date has intercepted strong hydrothermal alteration, generally associated
with mineralization. Most assays from the first half drill program are pending, though early highlights include hole NM-260 (99
metres of 0.21g/t gold and 0.32% copper, including 11 metres of 0.53 g/t gold and 0.47% copper), and extend the Sucupira mineral
envelope to the northwest.
At Baru, drilling completed to date focused on the central part of the deposit. Most assays from the first six
months of 2018 are pending, though early drill results have extended copper and gold mineralization at Baru, which is expected to
decrease the waste stripping ratio associated with the extraction of Sucupira ore.
Figure 9 displays a cross section of Baru and Sucupira demonstrating their continuity and relative placement to
the current Chapada mine. Figure 10 presents selected assays from Sucupira and Baru.
At Santa Cruz, drilling has been executed in the northwest sector of the target, where drill holes SC-23 and
SC-24 have identified a continuous mineralized zone for 500 metres along a Northeast-Southwest direction (Figure 11) related to
high density, A-type quartz veins and biotitic hydrothermal alteration. These results are similar to those found at Corpo Sul and
this is the first time they have been intercepted at this target. Figure 12 presents selected assays from Santa Cruz. Results from
Santa Cruz appear promising and will be followed up.
In the first half of 2018, 3,432 metres of drilling were completed in support of the objective to target higher
grade gold mineralization. The majority of the work has been completed at Hidrotermalito, focusing on oxide and underlying sulphide
mineralization.
Hidrotermalito is within two kilometres of the existing plant and may represent a copper-gold system with higher
grades than current Chapada mineral reserves. The deposit is open to the west and thicker sections of the ore body have been
discovered but require follow up work to test for continuity. A cross section of Hidrotermalito is shown in Figure 13. Many of the
assays are pending, but highlighted assay results returned to date are shown in Figure 14.
The surface exploration program at Chapada continues to build a pipeline of exploration targets. In
support of this goal, over 800 chip samples and over 3,500 soil samples have been collected at several locations throughout the
property. In particular, Água Branca, Jacutinga, Pedra Preta, Guará and Lambari have been identified as warranting follow up
work. Scout drilling will be completed on these targets over the next 18 months.
MINERA FLORIDA, CHILE
In late 2016, Yamana acquired the Agua Fria concessions and this area was the focus of exploration in late 2017
through the first half of 2018. Exploration continues to expand all resource categories at higher grade than the LOM plan in the
Pataguas and PV Sur and Fantasma sectors. New surface discoveries within the Agua Fria concessions continue to provide new targets
for future resource growthmine expansion.
The goals of the 2018 exploration program for Minera Florida are:
- Expand measured, indicated and inferred mineral resources by following up on recent exploration success at Las
Pataguas, PV Sur, Tribuna Este, Los Patos & Volga; and
- Continue property surface exploration program to identify new veins near the current mine workings.
During the first half of 2018, the company completed 30,930 metres in support of the goal to expand all
categories of mineral resources at Minera Florida and to generate new exploration targets in the new Agua Fria concessions.
Drilling at PV Sur has enhanced the structural model and displays the development of wider, multiple mineralized zones along the
intersection of the West- Northwest striking veins and north-south faults (see Plan View, Figure 15). Results from Fantasma, PV Sur
and Don Leopoldo in the Pataguas area all indicate significant new mineralized zones. Highlighted results from these zones are in
Figure 16. Infill drilling on the historic Core Mine area has also yielded significant high-grade results, most notably at
Centenario Sur and Maquis Clavo II (Figure 17).The regional surface exploration program has been progressing with a focus on
Fantasma, Las Lauras, Quesería, Mailen and Los Patos areas (Figure 16). As a result of work completed to date, the results suggest
the discovery of at least five new veins. Work is currently ongoing to determine if these newly discovered Northwest-Southeast
trending veins are intersected by North South structures, as historically this is where significant mineralization has been
discovered at Minera Florida. It is expected that work to be undertaken in the second half of 2018 will support these concepts and
evaluate the economic potential of these new targets.
EL PEÑÓN, CHILE
Exploration at El Peñón continues to successfully upgrade inferred mineral resources to mineral reserve status
within the core mine area, which is expected to extend mine life by, at a minimum, replacing depletion supporting long term stable
mine production.
The goals of the 2018 exploration program at El Peñón are to:
- Expand all categories of measured, indicated & inferred mineral resources;
- Test deep extensions of larger veins; and
- Test secondary structures to identify new core mine opportunities.
Approximately 21,900 metres of drilling was completed at El Peñón in the second quarter of 2018. Efforts focused
primarily on upgrading inferred mineral resources at the Aleste, Bonanza, and Dorada sectors through infill drilling. Overall,
infill drilling has demonstrated positive results and is expected to result in an upgrading to measured and indicated mineral
resources. Drill results from this program are presented in Figure 18.
Outside of the core mine area, the district exploration program is advancing through detailed mapping, sampling
and trenching activities. Drilling is expected to start in the second half of 2018.
CERRO MORO, ARGENTINA
Results to the end of the second quarter suggest that, by year end, new measured and indicated mineral resources
on the high -grade Veronica vein will replace mining depletion associated with 2018 production. Several new vein intercepts support
modest growth of core mine inferred mineral resources, while a strong surface program is successfully delineating new drill targets
for an anticipated long-term mine life extension.
The goals of the 2018 exploration program for Cerro Moro are to:
- Expand measured and indicated mineral resources;
- Add Inferred mineral resources within the core mine; and
- Develop new targets with surface exploration that can be part of the 2019 exploration drill program.
Approximately 13,800 metres of drilling was completed at Cerro Moro in the second quarter of 2018. Focus was on
discovering new inferred mineral resources and converting existing inferred mineral resources to measured and indicated mineral
resources, with the majority of the infill drilling completed on the Veronica vein, which was discovered in 2017, the Escondida Far
East and Escondida Far West.
Successful results to date indicate drilling on these veins will likely lead to measured and indicated mineral
resources that will replace mining depletion associated with 2018 production. Infill drilling highlights for Veronica are shown in
long section in Figure 19 displaying the high-grade shoot at the western end of the new vein discovery. Selected assays are
presented in Figure 20.
Scout drilling was completed on several other near mine targets and extensive surface work is ongoing to
generate future targets for follow up drilling. Encouraging results from several new target areas are expected to develop into
inferred mineral resources with further drilling. The strong surface exploration effort is providing new drill targets both within
the core mine area and the very large regional land package, increasing the inventory of potential targets for future
exploration.
Overall, exploration at Cerro Moro is progressing toward the objective of increasing mine life by adding new
mineral reserves and mineral resources in all categories.
LAVRA VELHA, BRAZIL
The Lavra Velha project is an early-stage gold-copper exploration project located in the central part of Bahia
State, Brazil, around 540 kilometres west of Salvador, capital of Bahia.
The Lavra Velha project represents a regional discovery and is believed to be an IOCG system characterized by
sub-horizontal mineralized levels (Figure 24). The mineralization control at Lavra Velha suggests a close affinity to the
volcanic-plutonic contact that likely acted as a structural/chemical boundary. To date Lavra Velha hosts an inferred mineral
resource of 3.9 million tonnes of 4.29 g/t containing 543,000 ounces of gold.
Recent surface work implies the footprint of alteration and mineralization has the potential to be much larger
than originally thought (Figure 21). The 2018 objective is to test many of these additional targets to identify a mineral envelope
capable of hosting a deposit of at least 1.0 million ounces with open pittable grades greater than 2 g/t gold. Drilling is in
progress and results are anticipated to be received in by the end of 2018.
FIGURES
For additional details and complete drill hole results, refer to the Company’s website at www.yamana.com.
Figure 1: Jacobina - Serra Do Corrego Up Dip Continuity (Looking West)
http://www.globenewswire.com/NewsRoom/AttachmentNg/8d665214-3237-4f48-9acf-71cf3e0303d8
Figure 2: Jacobina - Serro do Corrego Selected Assays
|
Hole |
Sector |
Reef |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
|
SCO610 |
S. Corrego |
Maneira |
92.50 |
94.50 |
2.00 |
1.57 |
|
SCO610 |
S. Corrego |
Holandes |
122.65 |
124.67 |
2.02 |
1.85 |
|
SCO610 |
S. Corrego |
Holandes |
152.00 |
153.37 |
1.37 |
1.89 |
|
SCO610 |
S. Corrego |
LVLPC |
217.30 |
218.50 |
1.20 |
6.89 |
|
SCO610 |
S. Corrego |
LVLPC |
219.50 |
221.88 |
2.38 |
2.14 |
|
SCO610 |
S. Corrego |
MU |
249.16 |
251.00 |
1.84 |
3.78 |
|
SCO612 |
S. Corrego |
Holandes |
124.00 |
126.00 |
2.00 |
1.24 |
|
SCO612 |
S. Corrego |
LU |
247.00 |
248.25 |
1.25 |
1.81 |
|
SCO612 |
S. Corrego |
LU |
256.22 |
256.50 |
0.28 |
7.69 |
|
SCO613 |
S. Corrego |
LVLPC |
119.50 |
120.84 |
1.34 |
2.22 |
|
SCO613 |
S. Corrego |
LVLPC |
133.08 |
134.04 |
0.96 |
2.7 |
|
SCO613 |
S. Corrego |
MU |
154.60 |
155.63 |
1.03 |
6.47 |
|
SCO615 |
S. Corrego |
LVL |
107.79 |
108.26 |
0.47 |
4.65 |
|
SCO615 |
S. Corrego |
LU |
175.50 |
180.00 |
4.50 |
2.12 |
|
SCO617 |
S. Corrego |
HOL |
111.63 |
113.64 |
2.01 |
2.66 |
|
SCO617 |
S. Corrego |
MSPC |
195.31 |
197.07 |
1.76 |
3.34 |
|
SCO617 |
S.
Corrego |
LVL |
199.00 |
205.28 |
6.28 |
3.82 |
|
Incl. |
S. Corrego |
LVL |
200.95 |
202.50 |
1.55 |
11.38 |
|
SCO617 |
S. Corrego |
LVL |
209.50 |
216.05 |
6.55 |
2.31 |
|
Incl. |
S. Corrego |
LVL |
213.00 |
215.59 |
2.59 |
3.5 |
|
SCO617 |
S.
Corrego |
MU |
238.70 |
241.50 |
2.80 |
6.96 |
|
SCO617 |
S.
Corrego |
MU |
243.00 |
246.95 |
3.95 |
6.59 |
*Intervals represent at least 70% of true widths
Figure 3: Jacobina - João Belo Selected Assays
|
Hole |
Sector |
Reef |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
|
JBA2206 |
J. Belo |
LVL |
54.80 |
58.50 |
3.70 |
2.00 |
|
JBA2206 |
J. Belo |
LVL |
92.98 |
94.00 |
1.02 |
2.78 |
|
JBA2206 |
J.
Belo |
LM |
119.40 |
135.50 |
16.14 |
2.73 |
|
Incl. |
J. Belo |
LM |
127.00 |
129.50 |
2.50 |
7.95 |
|
JBA2207 |
J. Belo |
LVL |
74.31 |
78.00 |
3.69 |
2.39 |
|
JBA2207 |
J. Belo |
LVL |
111.40 |
116.00 |
4.63 |
2.78 |
|
JBA2207 |
J. Belo |
LVL |
129.30 |
131.00 |
1.67 |
4.75 |
|
JBA2207 |
J. Belo |
LM |
145.50 |
158.00 |
12.55 |
1.64 |
|
Incl. |
J. Belo |
LM |
149.00 |
152.00 |
3.00 |
2.95 |
|
JBA2211 |
J. Belo |
LVL |
75.48 |
79.50 |
4.02 |
1.83 |
|
JBA2211 |
J.
Belo |
LVL |
89.00 |
109.50 |
20.50 |
2.64 |
|
Incl. |
J. Belo |
LVL |
89.35 |
92.00 |
2.65 |
6.49 |
|
Incl. |
J. Belo |
LVL |
93.50 |
96.90 |
3.40 |
6.84 |
|
JBA2217 |
J.
Belo |
LVL |
69.92 |
76.06 |
6.14 |
5.62 |
|
Incl. |
J. Belo |
LVL |
69.92 |
72.18 |
2.26 |
14.20 |
|
JBA2217 |
J. Belo |
LM |
105.90 |
107.60 |
1.72 |
1.57 |
|
JBA2217 |
J. Belo |
LM |
133.80 |
140.00 |
6.18 |
2.96 |
|
JBA2221 |
J. Belo |
LVL |
68.92 |
80.50 |
11.58 |
1.78 |
|
Incl. |
J. Belo |
LVL |
70.50 |
72.50 |
2.00 |
5.78 |
|
JBA2221 |
J. Belo |
LM |
136.50 |
142.50 |
6.00 |
3.36 |
|
Incl. |
J. Belo |
LM |
138.50 |
141.00 |
2.50 |
6.60 |
|
JBA2181 |
J.
Belo |
QTO |
89.50 |
91.50 |
2.00 |
14.78 |
|
JBA2197 |
J.
Belo |
LVLPC |
159.5 |
162.2 |
2.78 |
10.97 |
|
Incl. |
J. Belo |
LVLPC |
159.5 |
160.5 |
1.05 |
27.33 |
| |
|
|
|
|
|
|
*Intervals represent at least 70% of true widths
Figure 4: Jacobina - Morro do Vento Selected Assays
|
Hole |
Sector |
Reef |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
|
MVT1532 |
M.Vento |
HW |
34.50 |
36.50 |
2.00 |
2.42 |
|
MVT1532 |
M.Vento |
MR |
86.00 |
93.00 |
7.00 |
1.55 |
|
MVT1532 |
M.Vento |
FW |
98.27 |
105.00 |
6.73 |
1.24 |
|
MVT1533 |
M.Vento |
MR |
101.30 |
106.00 |
4.75 |
19.53 |
|
MVT1533 |
M.Vento |
FW |
106.00 |
114.50 |
8.50 |
2.15 |
|
MVT1533 |
M.Vento |
FW |
116.60 |
125.00 |
8.41 |
2.98 |
|
MVT1540 |
M.Vento |
HW |
75.00 |
76.50 |
1.50 |
8.35 |
|
MVT1540 |
M.Vento |
MR |
118.90 |
123.10 |
4.14 |
1.69 |
|
Incl. |
M.Vento |
MR |
120.90 |
123.10 |
2.12 |
2.62 |
|
MVT1540 |
M.Vento |
FW |
126.30 |
129.50 |
3.20 |
1.57 |
|
MVT1541 |
M.Vento |
HW |
88.50 |
91.57 |
3.07 |
3.24 |
|
MVT1541 |
M.Vento |
MR |
92.24 |
94.70 |
2.46 |
3.65 |
|
MVT1541 |
M.Vento |
FW |
99.32 |
101.00 |
1.68 |
1.51 |
|
MVT1544 |
M.Vento |
HW |
65.00 |
66.00 |
1.00 |
1.84 |
|
MVT1544 |
M.Vento |
MR |
77.00 |
80.00 |
3.00 |
3.81 |
|
MVT1544 |
M.Vento |
MR |
81.10 |
83.00 |
1.90 |
2.77 |
|
MVT1516 |
M.Vento |
FW |
78.54 |
79.50 |
0.96 |
8.67 |
|
MVT1518 |
M.Vento |
FW |
33.00 |
35.50 |
2.50 |
1.83 |
|
MVT1518 |
M.Vento |
FW |
50.37 |
52.50 |
2.13 |
4.97 |
|
MVT1518 |
M.Vento |
FW |
55.50 |
73.00 |
17.50 |
1.25 |
|
Incl. |
M.Vento |
FW |
68.00 |
68.50 |
0.50 |
4.39 |
|
MVT1524 |
M.Vento |
FW |
51.50 |
52.58 |
1.08 |
4.17 |
| |
|
|
|
|
|
|
*Intervals represent at least 70% of true widths
Figure 5: Jacobina - Maneira Reef Selected Assays
|
Hole |
Sector |
Reef |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
|
CAN1065 |
CAC |
MAN |
26.90 |
28.50 |
1.60 |
3.18 |
|
CAN1065 |
CAC |
MAN |
60.40 |
61.45 |
1.05 |
15.93 |
|
CAN1068 |
CAC |
MAN |
74.50 |
86.19 |
11.69 |
4.51 |
|
CAN1068 |
CAC |
MAN |
83.50 |
86.19 |
2.69 |
8.94 |
|
CAN1070 |
CAC |
MAN |
38.12 |
40.05 |
1.93 |
10.31 |
|
CAN1064 |
CAC |
MAN |
101.02 |
103.50 |
2.48 |
13.95 |
|
CAN1052 |
CAC |
MAN |
62.00 |
64.50 |
2.50 |
6.45 |
|
Incl. |
CAC |
MAN |
62.00 |
63.10 |
1.10 |
11.07 |
| |
|
|
|
|
|
|
*Intervals represent at least 70% of true widths.
Figure 6: Jacobina - Morro do Vento Long Section (Looking West)
http://www.globenewswire.com/NewsRoom/AttachmentNg/0897a69b-f144-461f-8280-0981c695aed6
Figure 7: Chapada - Suruca Cross Section (Looking West)
http://www.globenewswire.com/NewsRoom/AttachmentNg/dc17bf4d-a797-45ca-bfe6-6731f90ed1be
Figure 8: Chapada - Suruca Selected Assays
|
Hole |
Sector |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
Estimated True
Width
(m) |
Type |
|
SU-1000** |
SURUCA |
42.00 |
180.00 |
138.00 |
0.45 |
75.35 |
Sulphide |
|
Including |
SURUCA |
42.00 |
84.27 |
42.27 |
1.05 |
21.10 |
Sulphide |
|
SU-1000** |
SURUCA |
265.00 |
390.38 |
125.38 |
0.55 |
68.25 |
Sulphide |
|
Including |
SURUCA |
352.00 |
362.00 |
10.00 |
2.54 |
5.40 |
Sulphide |
|
SU-1005 |
SURUCA |
44.96 |
73.00 |
28.04 |
0.26 |
|
Sulphide |
|
Including |
SURUCA |
67.00 |
73.00 |
6.00 |
0.58 |
|
Sulphide |
|
SU-1005 |
SURUCA |
95.00 |
127.00 |
32.00 |
0.41 |
|
Sulphide |
|
Including |
SURUCA |
98.00 |
107.00 |
9.00 |
1.02 |
|
Sulphide |
|
SU-1008 |
SURUCA |
31.96 |
92.00 |
60.04 |
0.19 |
|
Sulphide |
|
Including |
SURUCA |
76.56 |
88.00 |
11.44 |
0.48 |
|
Sulphide |
|
SU-1008 |
SURUCA |
110.00 |
145.87 |
35.87 |
0.28 |
|
Sulphide |
|
Including |
SURUCA |
115.30 |
128.60 |
13.30 |
0.48 |
|
Sulphide |
|
SU-1010 |
SURUCA |
298.00 |
424.00 |
126.00 |
0.62 |
|
Sulphide |
|
Including |
SURUCA |
391.80 |
418.00 |
26.20 |
1.10 |
|
Sulphide |
|
SU-1013 |
SURUCA |
32.43 |
41.00 |
8.57 |
0.45 |
|
Sulphide |
|
SU-1013 |
SURUCA |
61.46 |
87.00 |
25.54 |
0.49 |
|
Sulphide |
|
Including |
SURUCA |
63.84 |
79.00 |
15.16 |
0.69 |
|
Sulphide |
|
SU-1018 |
SURUCA |
238.00 |
304.00 |
66.00 |
0.90 |
|
Sulphide |
*Intervals represent at least 80% of true width unless otherwise noted.
Figure 9: Chapada - Sucupira and Baru Cross Section (Looking Northeast)
http://www.globenewswire.com/NewsRoom/AttachmentNg/f4b6d5dc-17c3-4ea7-9709-87875a4f056f
Figure 10: Chapada - Sucupira and Baru Selected Assays
|
Hole |
Sector |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
Cu (%) |
Type |
|
NM-260 |
SUCUPIRA |
74.00 |
82.00 |
8.00 |
0.10 |
0.14 |
Sulphide |
|
NM-260 |
SUCUPIRA |
92.16 |
105.94 |
13.78 |
0.16 |
0.19 |
Sulphide |
|
Including |
SUCUPIRA |
98.00 |
105.94 |
7.94 |
0.23 |
0.23 |
Sulphide |
|
NM-260 |
SUCUPIRA |
208.00 |
307.24 |
99.24 |
0.21 |
0.32 |
Sulphide |
|
Including |
SUCUPIRA |
271.00 |
282.00 |
11.00 |
0.53 |
0.47 |
Sulphide |
|
NM-262 |
SUCUPIRA |
92.00 |
164.00 |
72.00 |
0.19 |
0.17 |
Sulphide |
|
Including |
SUCUPIRA |
107.00 |
117.00 |
10.00 |
0.39 |
0.24 |
Sulphide |
|
Including |
SUCUPIRA |
152.13 |
159.00 |
6.87 |
0.69 |
0.4 |
Sulphide |
|
NM-256 |
BARU |
61.20 |
108.00 |
46.80 |
0.1 |
0.29 |
Sulphide |
|
Including |
BARU |
71.00 |
90.00 |
19.00 |
0.12 |
0.31 |
Sulphide |
|
Including |
BARU |
100.00 |
108.00 |
8.00 |
0.12 |
0.35 |
Sulphide |
|
NM-258 |
BARU |
73.00 |
142.61 |
69.61 |
0.13 |
0.29 |
Sulphide |
|
Including |
BARU |
104.00 |
126.00 |
22.00 |
0.22 |
0.47 |
Sulphide |
*Sucupira and Baru intervals represents approximate true width.
Figure 11: Chapada - Santa Cruz Selected Assays
|
Hole |
Sector |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
Cu (%) |
Type |
|
SC-22 |
SANTA
CRUZ |
40.82 |
86.74 |
45.92 |
- |
0.15 |
Sulphide |
|
Including |
SANTA CRUZ |
79.57 |
86.74 |
7.17 |
0.10 |
0.27 |
Sulphide |
|
SC-23 |
SANTA
CRUZ |
139.56 |
178.56 |
39.00 |
0.19 |
0.39 |
Sulphide |
|
Including |
SANTA CRUZ |
150.00 |
157.00 |
7.00 |
0.23 |
0.45 |
Sulphide |
|
Including |
SANTA CRUZ |
165.23 |
177.00 |
11.77 |
0.2 |
0.43 |
Sulphide |
|
SC-24 |
SANTA
CRUZ |
126.52 |
172.00 |
45.48 |
0.15 |
0.38 |
Sulphide |
|
Including |
SANTA CRUZ |
128.00 |
136.81 |
8.81 |
0.21 |
0.44 |
Sulphide |
|
Including |
SANTA CRUZ |
143.04 |
153.00 |
9.96 |
0.31 |
0.65 |
Sulphide |
*Intervals represent approximate true width.
Figure 12: Chapada - Plan Map Displaying 500m Strike Of Santa Cruz System
http://www.globenewswire.com/NewsRoom/AttachmentNg/d995def6-cf67-437f-b2d2-acc7012d92c8
Figure 13: Chapada - Plan Map and Cross Section of Hidrotermalito Mineralization
Envelope
http://www.globenewswire.com/NewsRoom/AttachmentNg/20f2514f-f8b4-498d-9539-556f5dbcb761
Figure 14: Chapada - Hidrotermalito Selected Assays
|
Hole |
Sector |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
Cu (%) |
Type |
|
HS-70 |
HIDROTERMALITO |
0.00 |
16.97 |
16.97 |
0.19 |
- |
Oxide |
|
HS-70 |
HIDROTERMALITO |
46.00 |
67.00 |
21.00 |
0.33 |
0.1 |
Sulphide |
|
Including |
HIDROTERMALITO |
46.00 |
56.00 |
10.00 |
0.52 |
0.14 |
Sulphide |
|
HS-66 |
HIDROTERMALITO |
0.00 |
34.47 |
34.47 |
0.37 |
0.01 |
Oxide |
|
Including |
HIDROTERMALITO |
0.64 |
13.00 |
12.36 |
0.61 |
0.01 |
Oxide |
|
Including |
HIDROTERMALITO |
31.00 |
34.47 |
3.47 |
0.57 |
0.01 |
Oxide |
*Intervals represent approximate true width
Figure 15: Minera Florida - Plan View of PV Sur
http://www.globenewswire.com/NewsRoom/AttachmentNg/c3ff89ae-4f57-4593-b4bf-3386b7102efb
Figure 16: Minera Florida - Don Leopold, Fantasma & PV Sur Selected Assays
|
Hole |
Vein |
From
(m) |
To
(m) |
Length
(m)* |
Au (g/t) |
Ag (g/t) |
Zn (%) |
|
ALH2414 |
Don
Leopoldo |
134.95 |
139.75 |
4.80 |
10.85 |
12 |
1.02 |
|
ALH2398 |
Don Leopoldo |
137.30 |
143.30 |
6.00 |
3.63 |
24 |
1.67 |
|
ALH2411 |
Fantasma
Oeste |
113.10 |
116.10 |
3.00 |
8.55 |
21 |
1.59 |
|
ALH2431 |
Fantasma
Oeste |
106.00 |
106.75 |
0.75 |
10.15 |
21 |
0.81 |
|
ALH2379 |
Fantasma
Oeste |
88.90 |
92.20 |
3.30 |
9.39 |
13 |
1.61 |
|
ALH2385 |
Fantasma
Oeste |
94.45 |
96.95 |
2.50 |
9.37 |
12 |
0.74 |
|
ALH2360 |
Satelite
Fantasma |
72.72 |
73.05 |
0.33 |
58.30 |
10 |
0.14 |
|
ALH2360 |
Satelite
Fantasma |
82.60 |
82.80 |
0.20 |
8.29 |
5 |
0.20 |
|
ALH2360 |
Satelite
Fantasma |
89.20 |
89.65 |
0.45 |
13.00 |
56 |
1.70 |
|
ALH2363 |
Satelite
Fantasma |
28.55 |
28.95 |
0.40 |
8.98 |
21 |
0.28 |
|
ALH2365 |
Satelite
Fantasma |
158.39 |
159.15 |
0.76 |
11.70 |
945 |
1.37 |
|
ALH2304 |
PVSur |
119.04 |
121.64 |
2.60 |
5.54 |
15 |
2.31 |
|
ALH2308 |
PVSur |
11.35 |
12.05 |
0.70 |
8.33 |
8 |
3.77 |
|
ALH2322 |
PVSur |
88.03 |
89.63 |
1.60 |
11.53 |
11 |
3.33 |
|
ALH2333 |
PVSur |
82.00 |
84.20 |
2.20 |
11.03 |
15 |
7.90 |
| |
|
|
|
|
|
|
|
* Intervals represent at least 80% of true widths
Figure 17: Minera Florida - Centenario Sur & Maquis Clavo II Selected Assays
|
Hole |
Vein |
From
(m) |
To
(m) |
Length
(m)* |
Au (g/t) |
Ag (g/t) |
Zn (%) |
|
ALH2399 |
Centenario
Sur |
46.30 |
50.64 |
4.34 |
8.78 |
21 |
1.35 |
|
ALH2400 |
Centenario
Sur |
47.10 |
50.90 |
3.80 |
10.31 |
16 |
1.33 |
|
ALH2407 |
Centenario
Sur |
54.75 |
57.05 |
2.30 |
12.60 |
20 |
1.19 |
|
ALH2410 |
Centenario
Sur |
61.10 |
67.35 |
6.25 |
9.13 |
23 |
2.22 |
|
ALH2441 |
Maquis Clavo
II |
64.75 |
66.70 |
1.95 |
12.98 |
35 |
6.44 |
|
ALH2466 |
Maquis Clavo
II |
0.00 |
2.10 |
2.10 |
4.21 |
21 |
1.27 |
| |
|
|
|
|
|
|
|
* Intervals represent at least 80% of true widths
Figure 18: El Peñón - Aleste, Bonanza & Dorada Selected Assays
|
Hole |
Sector |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
Ag (g/t) |
|
SAI0153C |
Aleste
SS |
309.67 |
311.40 |
0.9 |
117.00 |
5,988 |
|
SAI0154C |
Aleste SS |
302.26 |
302.95 |
0.5 |
9.21 |
508 |
|
SAI0158P |
Aleste SS |
273.00 |
276.00 |
1.3 |
28.30 |
1,470 |
|
SQI0021C |
Angelina |
430.28 |
439.60 |
4.3 |
15.50 |
286 |
|
UIB0032 |
Bonanza NN3 |
88.50 |
89.40 |
0.9 |
19.40 |
91 |
|
UIB0033 |
Bonanza
NN3 |
111.00 |
113.90 |
1.4 |
12.03 |
358 |
|
UIB0034 |
Bonanza NN3 |
168.43 |
169.65 |
0.4 |
11.40 |
63 |
|
UIB0039 |
Bonanza NN3 |
114.08 |
114.38 |
0.3 |
16.90 |
8 |
|
UIB0040 |
Bonanza NN3 |
183.28 |
187.87 |
1.1 |
7.90 |
40 |
|
UID0234 |
Dorada |
154.00 |
156.09 |
2.0 |
7.08 |
318 |
|
UED0032 |
Dorada
Este |
112.64 |
115.00 |
1.7 |
50.81 |
2,460 |
|
UID0236 |
Dorada FW |
164.00 |
165.00 |
0.9 |
10.90 |
568 |
|
SOI0082C |
Dorada FW W |
241.00 |
243.00 |
0.3 |
7.300 |
1,198 |
|
SOI0083P |
Dorada FW W |
204.00 |
208.00 |
1.6 |
11.8 |
619 |
*Intervals represent at least 80% of true widths
Figure 19: Cerro Moro - Veronica Cross Section July 2018 (Looking Northeast)
http://www.globenewswire.com/NewsRoom/AttachmentNg/861e0b05-dede-4b1c-911d-f76d727d3dd5
Figure 20: Cerro Moro - Veronica Selected Assays
|
Hole |
Sector |
From
(m) |
To
(m) |
Interval
(m)* |
Au (g/t) |
Ag (g/t) |
|
MD2453 |
Veronica |
95.0 |
95.5 |
0.5 |
10.25 |
980 |
|
MD2453 |
Veronica |
98.5 |
99.1 |
0.6 |
28.83 |
3,265 |
|
MD2454 |
Veronica |
119.2 |
120.3 |
1.1 |
61.24 |
2,368 |
|
MD2467 |
Veronica |
148.9 |
150.7 |
1.8 |
8.15 |
430 |
|
MD2478 |
Veronica |
37.9 |
41.4 |
3.5 |
11.01 |
711 |
|
T0182 |
Veronica |
4.5 |
10.7 |
6.3 |
10.27 |
675 |
| |
|
|
|
|
|
|
* Intervals represent at least 80% of true widths
Figure 21: Lavra Velha Mineralized Lens’ Relative to Potential Pit Shell (Looking East)
http://www.globenewswire.com/NewsRoom/AttachmentNg/3c5c14e7-25bc-4246-b90e-3c39672246e5
Figure 22: Lavra Velha Plan Map Displaying Regional Targets
http://www.globenewswire.com/NewsRoom/AttachmentNg/caa4233e-f114-4a0b-bf4d-c5b4b5f70dba
Qualified Persons
Scientific and technical information contained in this press release has been reviewed and approved by
Henry Marsden (Senior Vice President, Exploration). Mr. Marsden is an employee of Yamana Gold Inc. and a “Qualified Person” as
defined by Canadian Securities Administrators' National Instrument 43-101 - Standards of Disclosure for Mineral Projects. He
has also reviewed and verified that the technical information related to the properties contained in this news release is
accurate.
Quality Assurance and Quality Control
Yamana incorporates a Quality Assurance and Quality Control (“QA/QC”) program for all of its mines and exploration projects
which conforms to industry best practices.
Samples are transported in security sealed bags for preparation at ALS and SGS analytical laboratories, both ISO 9001:2008 and
17025 certified laboratories, except at Jacobina where sample preparation is completed on site prior to shipping to ALS analytical
facilities. Au is analysed by gold fire assay with 30g or 50 g aliquot and AAS finish. Samples over 5 g/t are re-analyzed by
gravimetric finish methods. Ag is determined using a four acid digestion and AAS finish (ore level) and samples over 30g/t are
re-analyzed by gravimetric finish methods. Cu is also determined with four acid digestion and AAS finish. Five percent of all pulps
are further checked by secondary certified laboratories (Intertek, SGS) using the same analytical methods.
All exploration diamond drill cores are split in half by mechanical spitting or core sawing and sampled at appropriate intervals
for assay. The remaining core, coarse reject and pulps are stored on-site in a secure location.
Quality assurance standards, duplicates, sterile and blanks are routinely inserted into the sample stream as a control for assay
accuracy, bias, precision and contamination. The results of these checks are tracked and failures are re-analyzed. This information
also includes pulp checks carried out in the secondary lab.
About Yamana
Yamana is a Canadian-based gold producer with significant gold production, gold development stage properties,
exploration properties, and land positions throughout the Americas including Canada, Brazil, Chile and Argentina. Yamana
plans to continue to build on this base through existing operating mine expansions and optimization initiatives, development of new
mines, the advancement of its exploration properties and, at times, by targeting other gold consolidation opportunities with a
primary focus in the Americas.
FOR FURTHER INFORMATION PLEASE CONTACT:
Investor Relations and Corporate Communications
416-815-0220
1-888-809-0925
Email: investor@yamana.com
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS: This news release contains
“forward-looking statements” and “forward-looking information” under applicable Canadian securities legislation within the meaning
of the United States Private Securities Litigation Reform Act of 1995. Forward-looking information includes, but is not limited to
information with respect to the Company’s strategy, plans or future financial or operating performance, including continued
advancements at Jacobina, Chapada, Minera Florida, El Peñón, Cerro Moro and Lavra Velha, the potential for future additions to
mineral resources and mineral reserves, expected upgrades from mineral resources to mineral reserves, plans to increase mine life
and increase production, expected exploration results and mine extensions. Forward-looking statements are characterized by words
such as “plan,” “expect”, “budget”, “target”, “project”, “intend”, “believe”, “anticipate”, “estimate” and other similar words, or
statements that certain events or conditions “may” or “will” occur. Forward-looking statements are based on the opinions,
assumptions and estimates of management considered reasonable at the date the statements are made, and are inherently subject to a
variety of risks and uncertainties and other known and unknown factors that could cause actual events or results to differ
materially from those projected in the forward-looking statements. These factors include the Company’s expectations in
connection with the production and exploration, development and expansion plans at the Company's projects discussed herein being
met, the impact of proposed optimizations at the Company's projects, changes in national and local government legislation,
taxation, controls or regulations and/or changes in the administration or laws, policies and practices, and the impact of general
business and economic conditions, global liquidity and credit availability on the timing of cash flows and the values of assets and
liabilities based on projected future conditions, fluctuating metal prices (such as gold, copper, silver and zinc), currency
exchange rates (such as the Brazilian real, the Chilean peso, and the Argentine peso versus the United States dollar), the impact
of inflation, possible variations in ore grade or recovery rates, changes in the Company’s hedging program, changes in accounting
policies, changes in mineral resources and mineral reserves, risks related to asset disposition, risks related to metal purchase
agreements, risks related to acquisitions, changes in project parameters as plans continue to be refined, changes in project
development, construction, production and commissioning time frames, unanticipated costs and expenses, higher prices for fuel,
steel, power, labour and other consumables contributing to higher costs and general risks of the mining industry, failure of plant,
equipment or processes to operate as anticipated, unexpected changes in mine life, final pricing for concentrate sales,
unanticipated results of future studies, seasonality and unanticipated weather changes, costs and timing of the development of new
deposits, success of exploration activities, permitting timelines, government regulation and the risk of government expropriation
or nationalization of mining operations, risks related to relying on local advisors and consultants in foreign jurisdictions,
environmental risks, unanticipated reclamation expenses, risks relating to joint venture operations, title disputes or claims,
limitations on insurance coverage and timing and possible outcome of pending and outstanding litigation and labour disputes, risks
related to enforcing legal rights in foreign jurisdictions, as well as those risk factors discussed or referred to herein and in
the Company's Annual Information Form filed with the securities regulatory authorities in all provinces of Canada and available at
www.sedar.com, and the Company’s Annual Report on Form 40-F
filed with the United States Securities and Exchange Commission. Although the Company has attempted to identify important
factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements,
there may be other factors that cause actions, events or results not to be anticipated, estimated or intended. There can be
no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially
from those anticipated in such statements. The Company undertakes no obligation to update forward-looking statements if
circumstances or management’s estimates, assumptions or opinions should change, except as required by applicable law. The reader is
cautioned not to place undue reliance on forward-looking statements. The forward-looking information contained herein is presented
for the purpose of assisting investors in understanding the Company’s expected financial and operational performance and results as
at and for the periods ended on the dates presented in the Company’s plans and objectives and may not be appropriate for other
purposes.
CAUTIONARY NOTE TO UNITED STATES INVESTORS CONCERNING ESTIMATES OF MEASURED, INDICATED AND INFERRED MINERAL
RESOURCES
This news release uses the terms “Mineral Resource”, “Measured Mineral Resource”, “Indicated Mineral Resource”
and “Inferred Mineral Resource” are defined in and required to be disclosed by National Instrument 43-101. However, these
terms are not defined terms under Industry Guide 7 and are not permitted to be used in reports and registration statements of
United States companies filed with the Commission. Investors are cautioned not to assume that any part or all of the mineral
deposits in these categories will ever be converted into Mineral Reserves. “Inferred Mineral Resources” have a great amount
of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that
all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of
Inferred Mineral Resources may not form the basis of feasibility or pre-feasibility studies, except in rare cases. Investors are
cautioned not to assume that all or any part of an Inferred Mineral Resource exists or is economically or legally mineable.
Disclosure of “contained ounces” in a Mineral Resource is permitted disclosure under Canadian regulations. In contrast, the
Commission only permits U.S. companies to report mineralization that does not constitute “Mineral Reserves” by Commission standards
as in place tonnage and grade without reference to unit measures. Accordingly, information contained in this news release may
not be comparable to similar information made public by U.S. companies subject to the reporting and disclosure requirements under
the United States federal securities laws and the rules and regulations of the Commission thereunder.
(Unless otherwise stated, all assays are uncut and intercepts represent 80% of true width)
