- 9 Metres Grading 3,212 gpt AgEq
- 3.5 Metres Grading 4,570 gpt AgEq
- 11.1 Metres Grading 879 gpt AgEq
Vancouver, British Columbia--(Newsfile Corp. - November 1, 2018) - SilverCrest Metals
Inc. (TSXV: SIL) (NYSE American: SILV) ("SilverCrest" or the "Company") is pleased to
announce further Phase III drill results for the Las Chispas Property (the "Property") located in Sonora, Mexico. As planned, the
first seven (7) in-fill drilling results are from the Babicanora Vein including Area 51 and Babicanora Central zones. Results for
the first five (5) holes from Area 51 show higher grades and greater vein widths overall than previously reported for nearby drill
results (see details below and attached Figures). The planned in-fill program is designed to upgrade the current inferred resource
at Las Chispas by improving the drill density to approximately 25 metre centres for confirmation of continuity, grade and thickness
of the vein. Although these in-fill holes are within the high-grade footprint of the updated resource announced on September 19,
2018 titled "SilverCrest Expands Las Chispas Inferred Resource 4.3 Million Tonnes at 3.68 gpt Au and 347 gpt Ag, or 623 gpt AgEq
for 87 Million Oz AgEq; Includes 1.6 Million Tonnes at 1,091 gpt AgEq for 56 Million Oz AgEq", they were not yet part of the
resource.
N. Eric Fier, CPG, P.Eng, and CEO, remarked, "We continue to de-risk Las Chispas with the startup of closely-spaced in-fill
drilling for the Babicanora Vein, including the high-grade Area 51 zone. By announcing our best drill hole intercept to date
suggests that significant additional potential could be discovered at Las Chispas. Furthermore, we are intercepting high-grade vein
mineralization within 5 to 10 metres of our projected target, which helps to increase our confidence in vein location and
continuity. With the addition of these first in-fill holes in the Babicanora Vein, we now have an impressive 119 drill intercepts
(variable sample widths from 0.5 to 3.2 metres) grading greater than 1,000 gpt AgEq, 30 intercepts greater than 5,000 gpt AgEq and
15 intercepts greater than 10,000 gpt AgEq with our highest single grade being 36,764 gpt AgEq over 0.5 metres from a total of 351
core holes (94,735 metres) drilled to date at Las Chispas. SilverCrest will continue with both its in-fill drilling focused on
de-risking our current resources and expansion drilling focused on new discoveries as we systematically work on completing the next
updated resource and our Preliminary Economic Assessment ("PEA") in Q1, 2019."
The most significant result for this release is our best intercept (grade x thickness) since commencement of the exploration
program in February 2016. Hole BA18-96 intersected 9.9 metres (true
width) grading 14.4 gpt Au and 2,132.4 gpt
Ag, or 3,212 gpt AgEq. Also noteworthy are holes
BA18-94 at 3.5 metres grading 33.06 gpt Au and
2,092.1 gpt Ag, or 4,570 gpt AgEq and BA18-95 at 11.1 metres grading 3.99 gpt
Au and 580.2 gpt Ag, or 879 gpt AgEq. The following table summarizes the most significant drill intercepts for
this news release (uncut, undiluted).
Babicanora Vein In-Fill Drill Intercepts:
Hole No. |
Vein Zone |
From
(m)
|
To
(m)
|
Drilled Intercept (m) |
Est. True Width
(m) |
Au
(gpt)
|
Ag
(gpt)
|
AgEq*
(gpt) |
|
BA18-93 |
Area 51 |
300.5 |
304.6 |
4.1 |
3.8 |
6.78 |
1,090.5 |
1,599 |
incl. |
|
302.4 |
304.6 |
2.2 |
2.0 |
8.97 |
1,505.0 |
2,177 |
BA18-94 |
Area 51 |
307.4 |
312.0 |
4.6 |
3.5 |
33.06 |
2,092.1 |
4,570 |
incl. |
|
310.2 |
311.3 |
1.1 |
0.8 |
80.65 |
6,573.3 |
12,622 |
BA18-95 |
Area 51 |
294.0 |
308.2 |
14.2 |
11.1 |
3.99 |
580.2 |
879 |
incl. |
|
296.0 |
298.7 |
2.7 |
2.1 |
8.01 |
1,250.0 |
1,850 |
incl. |
|
303.1 |
304.2 |
1.1 |
0.9 |
25.5 |
2,381.0 |
4,293 |
BA18-96 |
Area 51 |
200.2 |
214.4 |
14.1 |
9.9 |
14.4 |
2,132.4 |
3,212 |
incl. |
|
204.1 |
210.5 |
6.4 |
4.5 |
30.28 |
4,498.3 |
6,769 |
incl. |
|
208.5 |
209.5 |
1.0 |
0.7 |
102.15 |
12,756.7 |
20,418 |
BA18-97 |
Area 51 |
294.0 |
296.0 |
2.0 |
1.5 |
2.52 |
454.4 |
643 |
incl. |
|
294.0 |
295.0 |
1.0 |
0.7 |
4.57 |
821.0 |
1,164 |
UB18-14** |
Babi Central |
92.2 |
99.1 |
6.9 |
5.1 |
4.16 |
197.3 |
510 |
incl. |
|
96.0 |
96.5 |
0.5 |
0.4 |
10.8 |
458.0 |
1,268 |
UB18-15 |
Babi Central |
64.5 |
66.9 |
2.4 |
1.8 |
0.10 |
191.7 |
197 |
Weighted Average |
Area 51
only |
|
|
7.8 |
6.0 |
11.41 |
1,368.9 |
2,224 |
Note: all numbers are rounded.
* AgEq based on 75 (Ag):1 (Au) calculated using long-term silver and gold prices of US$18.50 per ounce silver and US$1,225 per
ounce gold, with average metallurgical recoveries of 86.6% silver and 98.9% gold.
**UB signifies an underground core hole. BA is a surface core hole.
All assays were completed by ALS Chemex in Hermosillo, Mexico, and North Vancouver, BC, Canada.
Holes BA18-93 to 97 contain variable amounts of coarse argentite, native silver, electrum and free gold (see attached
Figures).
A comparison of the weighted average grade (uncut, undiluted) and true widths of the previous drill hole results in the "Area of
Influence" (see attached Figures) versus the combined previous and new drill hole results shows an increase of 35% in width and 13%
in AgEq grade based on the following:
- Weighted average for previous drill results (10 holes): 2.9 metres grading 9.06 gpt Au and 980.5 gpt Ag, or 1,661 gpt AgEq.
- Weighted average for new drill results (5 holes, table): 6.0 metres grading 11.41 gpt Au and 1,368.9 gpt Ag, or 2,224 gpt
AgEq.
- Weighted average for previous and new drill results (15 holes): 3.9 metres grading 10.33 gpt Au and 1,189.8 gpt Ag, or 1,964
gpt AgEq.
This general comparison is based on the first five in-fill holes to be reported in the Area 51 zone. Further in-fill drilling is
underway, and initial results may not be indicative of additional future results.
The Company continues its Phase III exploration program with eight (8) drills operating on site, seven on surface and one
underground. Drills are focused on expanding mineralization for inclusion in the next updated resource anticipated in Q1, 2019, and
in-fill drilling (estimated 25 metre spacing) to reclassify Inferred Resources to Measured and Indicated. An additional 15,000 to
20,000 metres of drilling are planned for inclusion in the next updated resource. Other ongoing site work includes PEA work, final
design work for the Area 51 decline, an extensive metallurgical test program, drilling large diameter wells for site water, and
permitting for various additional work.
The Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects for this news release is N.
Eric Fier, CPG, P.Eng, and CEO for SilverCrest, who has reviewed and approved its contents.
Figure 1: Long Section (Inclined) of Babicanora Vein Las Chispas Property, Looking Southwest
To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/1467/40776_sc2.jpg
Figure 2: Long Section (Inclined) of Babicanora Vein Area 51, Looking Southwest
To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/1467/40776_sc4.jpg
Figure 3: Las Chispas District with Babicanora Plan Map, October 2018
To view an enhanced version of Figure 3, please visit:
https://orders.newsfilecorp.com/files/1467/40776_sc6.jpg
ABOUT SILVERCREST METALS INC.
SilverCrest is a Canadian precious metals exploration company headquartered in Vancouver, BC, that is focused on new
discoveries, value-added acquisitions and targeting production in Mexico's historic precious metal districts. The Company's current
focus is on the high-grade, historic Las Chispas mining district in Sonora, Mexico. SilverCrest is the first company to
successfully drill-test the historic Las Chispas Project resulting in numerous discoveries. The Company is led by a proven
management team in all aspects of the precious metal mining sector, including taking projects through discovery, finance, on time
and on budget construction, and production.
FORWARD-LOOKING STATEMENTS
This news release contains "forward-looking statements" within the meaning of Canadian securities legislation. These
include, without limitation, statements with respect to: the strategic plans, timing and expectations for the
Company's exploration, rehabilitation and drilling programs of the Las Chispas
Property, including drilling test water wells, permitting for various work, and optimizing and updating the
Company's resource model; information with respect to high grade areas and size of
veins projected from underground sampling results and drilling results; and the accessibility
of future mining at the Las Chispas Property. Such forward-looking statements or information are
based on a number of assumptions, which may prove to be incorrect. Assumptions have been made regarding, among other
things: the conditions in general economic and financial markets; availability of skilled labour; timing and amount of
expenditures related to rehabilitation and drilling programs; and effects of regulation by governmental agencies. The
actual results could differ materially from those anticipated in these forward-looking statements as a result of risk factors
including: the timing and content of work programs; results of exploration activities; the interpretation of drilling
results and other geological data; receipt, maintenance and security of permits and mineral property titles; environmental and
other regulatory risks; project cost overruns or unanticipated costs and expenses; and general market and industry conditions.
Forward-looking statements are based on the expectations and opinions of the Company's management on the date the statements are
made. The assumptions used in the preparation of such statements, although considered reasonable at the time of preparation, may
prove to be imprecise and, as such, readers are cautioned not to place undue reliance on these forward-looking statements, which
speak only as of the date the statements were made. The Company undertakes no obligation to update or revise any forward-looking
statements included in this news release if these beliefs, estimates and opinions or other circumstances should change, except as
otherwise required by applicable law.
N. Eric Fier, CPG, P.Eng
Chief Executive Officer
SilverCrest Metals Inc.
For Further Information:
SilverCrest Metals Inc.
Contact: Fred Cooper, Investor Relations
Telephone: +1 (604) 694-1730
Fax: +1 (604) 357-1313
Toll Free: 1-866-691-1730 (Canada & USA)
Email: info@silvercrestmetals.com
Website: www.silvercrestmetals.com
570 Granville Street, Suite 501
Vancouver, British Columbia V6C 3P1
Neither TSX Venture Exchange nor its Regulation Services Provider (as defined in the policies of the TSX Venture
Exchange) accepts responsibility for the adequacy or accuracy of this release