Historic Trenches sampled along Borys Lake Zone And Cominco Zones
KELOWNA, British Columbia, Nov. 14, 2018 (GLOBE NEWSWIRE) -- IRONSIDE RESOURCES INC.
(TSX-V:IRC) (“Ironside” or the “Company”) is pleased to announce results of an
initial field investigation on the Watts Lake property (the “Property”), located in north-central Saskatchewan. Historic
sampling of surface trenches of outcrop on the property date back to 1963. Records indicate that it has been several decades
since many of the historic trenches were last investigated and sampled. The field crew was able to locate and collect grab samples
from several of these historic outcrop trenches for multi-element assay analysis. Assay results not only confirm mineralization,
but in several instances significantly exceed known historic results. Assay results from trenches along the Borys Lake zone
confirm that mineralization of zinc, lead and silver is strongly anomalous and generally occurs together. Trench 4, located
at the SW end of the Borys Lake Main Zone returned the highest zinc values with up to 21.3% Zn while Trench 8,
located a further 1km to the SW in the Will A Zone yielded the highest silver values with up to 184 g/t Ag.
Ross McElroy, Director and Chief Geologist, said, “Historic data on Watts Lake dates back more than 50
years. However, significant progress is being made compiling the project’s historic data into a comprehensive modern
geological database. Locating and confirming a number of historic trenches in the field is a critical step towards providing
confidence in the strength of this large mineralized system. We are very encouraged to see that assays not only confirmed historic
results, but in several instances exceeds them. The strong high-grade silver mineralization associated with zinc and lead in
the Borys Lake zone and its association with copper mineralization in the Cominco Zones adds an additional dimension to the
potential of the Watts Lake project. A winter drill campaign is currently being planned, which will be designed to test for
additional mineralization.”
The Watts Lake property has been explored and developed sporadically since the mid 50’s by several companies,
most recently Claude Resources Inc. in the early 90’s. The initial phase of Ironside’s work is designed to compile and verify
historic work on the property, including locating and surveying historic surface trenches and drill collars and reviewing drill
core as available. During October 16th – 21st, field crews investigated a number of historic trenches
on both the Borys Lake trend and the parallel Cominco trend located approximately 3km to the south. A total of 7 historic
trenches were located and representatively sampled. For the sake of comparative analysis, Ironside has adopted the same
historic naming of trenches. Five historic trenches were located along the NE-SW oriented Borys Lake trend (Trenches 1, 3, 4, 6 and
8) and two historic trenches were investigated and sampled along the Cominco Zone trend (Cominco Zone A – Trench 7 and Cominco Zone
B – Trench 1). (See Maps 1 to 4)
Borys Lake Zone Surface Trenches
The Borys Lake trend follows a southwest-northeast orientation and occurs along a lithological contact between a
Metabasite-Amphibolite to the south and Pelitic-Psammitic gneiss to the north. This lithologic contact is coincident with a
~14km long conductive trend as traced from a 2008 airborne versatile time-domain electromagnetic (VTEM) geophysical survey.
The Borys Lake trend includes five historic drill confirmed mineralized zones (Can, Will A, Will B, Main and Mac) and numerous
historic outcrop trenches over ~4.5km of strike. The historic resource estimate completed by Husky Oil Operations Ltd. in
1972, included only drill holes testing the Main zone, and to a depth of 30m.
Five historic trenches were located in the field along the Borys Lake trend (Trenches 1, 3, 4, 6 and 8).
Representative samples were collected from all 5 trenches. Assay results confirmed the presence of significant
zinc-lead-silver mineralization which generally occur together with locally anomalous gold and copper values. Comparative
highlights of analytical results are compared with historic results in Tables 1 and 2.
Borys Lake Trench 4: Trench 4 is located at the SW end of the Borys Lake Main
Zone. Eight samples were collected for analysis. Overall, Trench 4 returned the highest Zinc values, with assays
ranging from 1.92% to 21.3% Zn (sample BLT4-1). Silver mineralization was strong ranging from 5.3 – 56.7
g/t Ag. Historic results from 1963 returned a maximum zinc value of 9.36 % Zn and a maximum silver value of 24.4 g/t
Ag.
Borys Lake Trench 8: Trench 8 is located a further ~1km to the SW of
Trench 4 and is associated with the Will A Zone. Five samples were collected for analysis. Overall, Trench 8 returned
the highest silver values compared to other trenches sampled. All five samples returned high-grade silver mineralization with
assays ranging from 70.2 to 184 g/t Ag. Historic assays from the same trench, returned a maximum of 43.1 g/t
Ag.
Table 1: 2018 Borys Lake Trend - Trench Sample Highlights
Mineralized
Trend |
Trench ID |
Company |
Year |
# of Samples
Collected |
Highlights |
Sample ID |
Sample Geochemistry |
Zn
(%) |
Pb
(%) |
Cu
(%) |
Ag
(g/t) |
Au
(g/t) |
Borys Lake Zone |
Trench 1 |
Ironside |
2018 |
1 |
Highest Zinc /
Silver |
BLT1-1 |
0.88 |
0.44 |
0.03 |
18.6 |
0.0 |
|
Trench 3 |
Ironside |
2018 |
1 |
Highest Zinc /
Silver |
BLT3-1 |
0.01 |
BD |
0.04 |
2.1 |
BD |
|
Trench 4 |
Ironside |
2018 |
8 |
Highest Zinc |
BLT4-1 |
21.30 |
0.43 |
0.03 |
6.9 |
0.0 |
|
|
|
|
|
Highest Silver |
BLT4-6 |
6.55 |
4.81 |
0.04 |
56.7 |
0.0 |
|
Trench 6 |
Ironside |
2018 |
6 |
Highest Zinc |
BLT6-3 |
14.00 |
0.54 |
0.11 |
32.0 |
1.7 |
|
|
|
|
|
Highest Silver |
BLT6-4 |
8.94 |
0.68 |
0.12 |
39.9 |
1.1 |
|
Trench 8 |
Ironside |
2018 |
5 |
Highest Zinc |
BLT8-4 |
2.01 |
4.25 |
0.03 |
113.0 |
0.2 |
|
|
|
|
|
Highest Silver |
BLT8-2 |
0.38 |
0.11 |
0.42 |
184.0 |
0.1 |
*BD – Below Detection Limit
Table 2: Historic Borys Lake Trend - Trench Sample Highlights
Mineralized
Trend |
Trench ID |
Company |
Year |
# of
Samples
Collected |
Highlights |
Sample ID |
Sample Geochemistry |
Zn
(%) |
Pb
(%) |
Cu
(%) |
Ag
(g/t) |
Au
(g/t) |
Borys Lake Zone |
Trench 1 |
McIntyre Mines |
1963 |
7 |
Highest Zinc |
|
1.21 |
0.63 |
N/A |
30.0 |
N/A |
|
|
|
|
|
Highest Silver |
|
0.28 |
0.45 |
NA |
31.9 |
N/A |
|
Trench 3 |
McIntyre Mines |
1963 |
5 |
Highest Zinc |
|
0.16 |
N/A |
0.10 |
2.2 |
N/A |
|
|
|
|
|
Highest Silver |
|
0.13 |
N/A |
0.03 |
15.3 |
N/A |
|
Trench 4 |
McIntyre Mines |
1963 |
2 |
Highest Zinc |
|
9.36 |
0.25 |
N/A |
10.3 |
N/A |
|
|
|
|
|
Highest Silver |
|
7.44 |
1.02 |
N/A |
24.4 |
N/A |
|
Trench 6 |
McIntyre Mines |
1963 |
7 |
Highest Zinc /
Silver |
|
8.49 |
0.31 |
0.12 |
23.4 |
N/A |
|
Trench 8 |
McIntyre Mines |
1963 |
4 |
Highest Zinc /
Silver |
|
1.95 |
1.66 |
N/A |
43.1 |
N/A |
*N/A – Not Assayed
Cominco Zone Surface Trenches
The Cominco trend is located ~3km to the south along a parallel trend to Borys Lake. The Cominco zones
occur within a Greywacke-conglomerate and are underexplored compared to the Borys Lake zone. Historically, two main areas of
interest were discovered along this trend, referred to as the Cominco A and Cominco B zones respectively from SW to NE.
Overall, the Cominco trend appears to be more anomalous in Copper and silver and to a lesser degree in zinc and lead compared to
the Borys Lake trend. Comparative highlights of analytical results are compared with historic results in Tables 3 and 4.
Cominco Zone A: The historic Trench 7 was not located in the field.
However, an outcrop sample collected ~90m to the southwest of the assumed Trench 7 location was collected. This sample was not
anomalous in geochemistry.
Cominco Zone B: Historic Trench 1 of the Cominco B zone was located and
sampled. Four samples were taken as continuous 1m channel-chips each, across the width of the outcrop. Assay results
returned copper values up to 0.61% Cu and silver up to 7.6 g/t Ag (sample CZBT1-3). It is
of significant note that historic Trench 4 (which was not located in the field but is believed to be ~75m to the NE of Trench 1)
was the subject of drilling in 1967. Historic drill hole DDH1 targeting below Trench 4 was reported to have intersected 0.71%
Cu over 6.1m.
Table 3: 2018 Cominco Zone Trend - Trench Sample Highlights
Mineralized
Trend |
Trench ID |
Company |
Year |
# of
Samples
Collected |
Highlights |
Sample ID |
Sample Geochemistry |
Zn
(%) |
Pb
(%) |
Cu
(%) |
Ag
(g/t) |
Au
(g/t) |
Cominco
Zone A |
90m south of
Trench 7 |
Ironside |
2018 |
1 |
Highest Copper /
Silver |
CZAT7-1 |
0.01 |
0.00 |
0.02 |
2.9 |
0.0 |
Cominco
Zone B |
Trench 1 |
Ironside |
2018 |
4 |
Highest Copper /
Silver |
CZBT1-3 |
0.03 |
0.01 |
0.61 |
7.6 |
0.1 |
*BD – Below Detection Limit
Table 4: 2018 Cominco Zone Trend - Trench Sample Highlights
Mineralized
Trend |
Trench ID |
Company |
Year |
# of Samples
Collected |
Highlights |
Sample ID |
Sample Geochemistry |
Zn
(%) |
Pb
(%) |
Cu
(%) |
Ag
(g/t) |
Au
(g/t) |
Cominco
Zone A |
Trench 7 |
Great Plains |
1967 |
8 |
Highest Copper /
Silver |
TR5 |
N/A |
N/A |
0.24 |
N/A |
N/A |
Cominco
Zone B |
Trench 1 |
Great Plains |
1967 |
1 |
Highest Copper /
Silver |
NWR1 |
N/A |
N/A |
0.17 |
N/A |
N/A |
*N/A – Not Assayed
Samples submitted for assays are grab samples collected from outcrop, except for Trench 1 at the Cominco Zone B
outcrop, which were continuous chip-channel samples. Samples were submitted to SRC Geoanalytical Laboratories (an SCC ISO/IEC
17025: 2005 Accredited Facility) in Saskatoon, SK using a procedure designed for basemetal analysis, which involves weight %
determination of As, Co, Cu, Ni, Pb, S and Zn where the sample is prepared using aqua regia digestion prior to analysis of 47
elements by ICP-OES and fire assay for gold.
Watts Lake Property
Watts Lake is a large contiguous land package covering 13,248 hectares, in the established, deposit endowed La
Ronge Domain, of Saskatchewan. It is located approximately 65 km north north-east of the town of La Ronge, SK and 20km
northwest of the community of Missinipe, SK. The well maintained gravel Provincial Highway 102 runs north from La Ronge, through
Missinipe to Reindeer Lake and its closest point is approximately 12.5km east of the property.
The project covers multiple, parallel basement conductive corridors, including the ~14km long Borys Lake
Corridor, which hosts the historic Borys Lake zinc-lead deposit as well as numerous other mineralized occurrences. The
property has been explored and developed sporadically since the mid 50’s by several companies. The Borys Lake deposit occurs
within northeast trending, steep northwesterly dipping supracrustal rocks at the eastern margin of the Crew Lake Belt of the La
Ronge Domain. These rocks comprise mainly biotitic gneisses that are variably migmatized. The deposit lies on the northwestern limb
of a major antiform within an approximately conformable, northeast trending biotite-chlorite shear zone. Structurally controlled
mineralization on the property consists of a suite of sulphide minerals including pyrrhotite, sphalerite, chalcopyrite, pyrite and
galena. Gold and silver are also present. The sulphides occur as fine dissemination, isolated blebs and rare veinlets.
Locally, massive sphalerite-galena mineralization occurs proximal to quartz-rich lithologies, which may represent
silicification.
Qualified Person
The technical information in this news release has been prepared in accordance with the Canadian regulatory
requirements set out in National Instrument 43-101 and reviewed on behalf of the company by Ross McElroy, P.Geol., Director and
Chief Geologist for Ironside Resources Inc., a qualified person.
About Ironside Resources Inc.
Ironside Resource Inc. is a Canadian based resource company specializing in the acquisition, exploration and
development of mineral resource assets. The company’s primary asset is the Watts Lake project for which it has entered into
an option agreement with Edge Geological Ltd. (“Edge”) to acquire a 100% interest. The company is headquartered in Kelowna,
British Columbia. Ironside’s common shares are listed on the TSX Venture Exchange under the symbol "IRC".
ON BEHALF OF IRONSIDE RESOURCES
info@ironsideresources.com
www.ironsideresources.com
"Ross McElroy"
TF:
1-866-979-7022
Ross McElroy, P. Geol.,
Director
Cautionary Statement:
Certain information contained in this press release constitutes “forward-looking information", within the
meaning of Canadian legislation. Generally, these forward-looking statements can be identified by the use of forward-looking
terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", “forecasts",
"intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain
actions, events or results "may", "could", "would", "might" or "will be taken", "occur", "be achieved" or “has the potential
to”. Forward looking statements contained in this press release may include statements regarding the future operating or
financial performance of Ironside Resources which involve known and unknown risks and uncertainties which may not prove to be
accurate. Actual results and outcomes may differ materially from what is expressed or forecasted in these forward-looking
statements. Such statements are qualified in their entirety by the inherent risks and uncertainties surrounding future
expectations. Among those factors which could cause actual results to differ materially are the following: market conditions and
other risk factors listed from time to time in our reports filed with Canadian securities regulators on SEDAR at www.sedar.com. The forward-looking statements
included in this press release are made as of the date of this press release and the Company disclaims any intention or obligation
to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as
expressly required by applicable securities legislation.