Mercer International Inc. Reports Second Quarter and First Half 2020 Results and Announces Quarterly Cash Dividend of $0.065

Selected Highlights

• Second quarter net loss of $8.4 million
  
  
• Quarterly Operating EBITDA* of $40.5 million
  
  
• Cash on hand and available credit facilities provide liquidity of about $566.8 million at June 30, 2020

NEW YORK, July 30, 2020 (GLOBE NEWSWIRE) -- Mercer International Inc. (Nasdaq: MERC) today reported second quarter 2020 Operating EBITDA decreased to $40.5 million from $70.0 million in the second quarter of 2019 and from $57.0 million in the first quarter of 2020.

In the second quarter of 2020, net loss was $8.4 million (or $0.13 per share) compared to net income of $10.3 million (or $0.16 per share) in the second quarter of 2019 and a net loss of $3.4 million (or $0.05 per share) in the first quarter of 2020.

In the first half of 2020, Operating EBITDA decreased by 50% to $97.5 million from $193.8 million in the same period of 2019. In the first half of 2020, net loss was $11.8 million compared to net income of $61.9 million in the same period of 2019.

Mr. David Gandossi, the Chief Executive Officer, stated: “While the world continues to be impacted by the COVID-19 pandemic, I am proud to say that our people have remained resilient and we implemented measures and procedures to meet the challenges of operating our business safely and efficiently. We are constantly monitoring our operations and guidance from governmental and health organizations to ensure that we continue to take appropriate and necessary actions to protect our people.

All of our mills ran well this quarter. Pulp production was down slightly in the quarter primarily due to a previously announced short-term planned curtailment.

Our Q2 results reflect strong cost control and steady production. On average, pulp pricing was modestly up compared to Q1. However, late in the current quarter, overall pulp demand was modestly weaker as continued strong tissue demand was more than offset by weaker demand from printing and writing customers. Our wood products segment had another strong quarter. Our Friesau mill ran well with strong demand in our U.S. market creating upward pricing pressure late in the quarter. In the current quarter approximately 38% of our lumber sales volumes were to the U.S. which was our single largest market.

As we move into Q3 we will remain focused on controlling our costs, managing our working capital and conservatively managing our strong liquidity position.”

____________
*Operating EBITDA is not a measure of financial performance under accounting principles generally accepted in the United States ("GAAP") and should not be considered in isolation or as a substitute for analysis of our results as reported under GAAP. See page 6 of the financial tables included in this press release for a reconciliation of net income (loss) to Operating EBITDA.

Consolidated Financial Results

Consolidated – Three Months Ended June 30, 2020 Compared to Three Months Ended June 30, 2019

Total revenues for the three months ended June 30, 2020 decreased by approximately 20% to $341.2 million from $425.8 million in the same quarter of 2019 primarily due to lower pulp sales realizations and pulp sales volumes.

Costs and expenses in the current quarter decreased by approximately 15% to $330.9 million from $387.9 million in the second quarter of 2019 primarily due to lower per unit fiber costs and lower pulp sales volumes and the positive impact of a stronger dollar on our Canadian dollar and euro denominated costs and expenses.

In the second quarter of 2020, Operating EBITDA decreased by approximately 42% to $40.5 million from $70.0 million in the same quarter of 2019 primarily due to lower pulp sales realizations partially offset by lower per unit fiber costs and the positive impact of a stronger dollar.

Segment Results

Pulp: Lower fiber costs more than offset by lower sales realizations

In the second quarter of 2020, pulp segment operating income decreased to $8.1 million from $42.3 million in the same quarter of 2019. The decrease was primarily due to lower pulp sales realizations partially offset by the positive impact of lower per unit fiber costs and a stronger dollar. In the current quarter of 2020, NBSK pulp sales realizations decreased by approximately 18% to $573 per ADMT from $699 per ADMT in the same quarter of the prior year due to high producer inventory levels. NBSK sales volumes decreased by approximately 4% to 422,586 ADMTs in the current quarter from 438,520 ADMTs in the same quarter of 2019 due to lower production.

Our Canadian pulp mills recorded a non-cash write down of our inventory carrying values of $12.3 million in the current quarter as a result of lower pulp sales realizations and high fiber costs.

Per unit fiber costs decreased in the current quarter by approximately 16% from the same quarter of 2019 due to lower per unit fiber costs for all of our mills. In Germany, per unit fiber costs benefitted from the continuing availability of beetle damaged wood. Per unit fiber costs in Canada declined but remained at historically high levels due to strong fiber demand in the mills' fiber procurement areas.

Wood Products: Continued strong production and lower fiber costs

In the second quarter of 2020 the wood products segment operating income increased to $4.3 million compared to an operating loss of $0.1 million in the same quarter of 2019. The increase was primarily due to strong production and lower per unit fiber costs. Production increased by approximately 13% to 113.5 MMfbm of lumber in the current quarter from 100.8 MMfbm in the same quarter of 2019 primarily due to capital improvements at the mill. In the current quarter per unit fiber costs decreased by approximately 26% from the same quarter of 2019 primarily as a result of the continuing availability of beetle damaged wood.

Average lumber sales realizations were generally flat at approximately $345 per Mfbm in the second quarter of 2020 compared to approximately $348 per Mfbm in the same quarter of 2019 as higher pricing in the U.S. market was offset by lower pricing in Europe. U.S. lumber pricing increased due to stronger demand in the current quarter. European lumber pricing declined due to an increase in the supply of lumber processed from beetle damaged wood which generally obtains lower prices.

Consolidated – Six Months Ended June 30, 2020 Compared to Six Months Ended June 30, 2019

Total revenues for the first half of 2020 decreased by approximately 24% to $691.8 million from $909.7 million in the first half of 2019 primarily due to lower pulp sales realizations and pulp sales volumes.

Costs and expenses in the first half of 2020 decreased by approximately 16% to $657.4 million from $778.3 million in the first half of 2019 primarily due to lower per unit fiber costs, lower pulp sales volumes and the positive impact of a stronger dollar on our Canadian dollar and euro denominated costs and expenses.

For the first half of 2020, our net loss was $11.8 million, or $0.18 per share compared to net income of $61.9 million, or $0.94 per share, in the same period of 2019.

In the first half of 2020, Operating EBITDA decreased by approximately 50% to $97.5 million from $193.8 million in the same period of 2019 primarily due to lower pulp sales realizations and pulp sales volumes partially offset by lower per unit fiber costs and the positive impact of a stronger dollar versus the Canadian dollar and euro.

Liquidity

The following table is a summary of selected financial information as of the dates indicated:

As of June 30, 2020, we had cash and cash equivalents of approximately $303.3 million, approximately $263.5 million available under our revolving credit facilities, providing aggregate liquidity of about $566.8 million.

In June 2020, we amended our revolving credit facility for our Celgar mill to increase the principal amount available to C$60 million from C$40 million with all other terms remaining substantially unchanged.

Current Market Environment

Commencing around the end of the second quarter, many countries have taken measures to ease restrictions on economic and social activities to, among other things, reopen their economies by allowing businesses to restart and encourage economic activity. The results of such economic measures and reopening have varied from country to country.

While such measures are encouraging, currently we are unable to predict the outcome or pace of such economic reopening, the strength or timing of any recovery or whether they will result in such a material resurgence of the virus that causes governments to re-impose restrictive measures.

As a result of the continuing global economic impact and uncertainty resulting from the COVID-19 pandemic and the seasonal third quarter pulp market slowdown, we are expecting an overall weakening in pulp demand in the upcoming quarter with some modest price improvements towards the end of the quarter.

On the pulp supply side, to date various pulp mills globally have delayed their annual maintenance schedules as a result of the current pandemic. As a result, we currently expect mills to curtail production to implement such delayed maintenance in the later part of this year or the early part of next year. As previously announced, in July our Celgar mill is taking a 30-day market related curtailment.

We currently expect strong lumber demand and higher lumber sales realizations in the U.S. market and steady demand and sales realizations in the European lumber market in the upcoming quarter.

Quarterly Dividend

A quarterly dividend of $0.065 per share will be paid on October 6, 2020 to all shareholders of record on September 29, 2020. Future dividends will be subject to Board approval and may be adjusted as business and industry conditions warrant.

Earnings Release Call

In conjunction with this release, Mercer International Inc. will host a conference call, which will be simultaneously broadcast live over the Internet. Management will host the call, which is scheduled for July 31, 2020 at 10:00 AM (Eastern Daylight Time). Listeners can access the conference call live and archived for 30 days over the Internet at https://edge.media-server.com/mmc/p/cmgyreto or through a link on the company's home page at https://www.mercerint.com. Please allow 15 minutes prior to the call to visit the site and download and install any necessary audio software.

Mercer International Inc. is a global forest products company with operations in Germany and Canada with consolidated annual production capacity of 2.2 million tonnes of pulp and 550 million board feet of lumber. To obtain further information on the company, please visit its web site at https://www.mercerint.com.

The preceding includes forward looking statements which involve known and unknown risks and uncertainties which may cause our actual results in future periods to differ materially from forecasted results. Words such as "expects", "anticipates", "projects", "intends", "designed", "will", "believes", "estimates", "may", "could" and variations of such words and similar expressions are intended to identify such forward-looking statements. Among those factors which could cause actual results to differ materially are the following: the highly cyclical nature of our business, raw material costs, our level of indebtedness, competition, foreign exchange and interest rate fluctuations, our use of derivatives, expenditures for capital projects, environmental regulation and compliance, disruptions to our production, market conditions and other risk factors listed from time to time in our SEC reports.

APPROVED BY:
Jimmy S.H. Lee
Executive Chairman
(604) 684-1099

David M. Gandossi, FCPA, FCA
Chief Executive Officer
(604) 684-1099

-FINANCIAL TABLES FOLLOW-

Summary Financial Highlights

Summary Operating Highlights

______________

MERCER INTERNATIONAL INC.
INTERIM CONSOLIDATED STATEMENTS OF OPERATIONS
(Unaudited)
(In thousands, except per share data)

MERCER INTERNATIONAL INC.
INTERIM CONSOLIDATED BALANCE SHEETS
(Unaudited)
(In thousands, except share and per share data)

MERCER INTERNATIONAL INC.
INTERIM CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)
(In thousands)

MERCER INTERNATIONAL INC.
COMPUTATION OF OPERATING EBITDA
(Unaudited)
(In thousands)

Operating EBITDA is defined as operating income plus depreciation and amortization and non-recurring capital asset impairment charges. Management uses Operating EBITDA as a benchmark measurement of its own operating results, and as a benchmark relative to its competitors. Management considers it to be a meaningful supplement to operating income as a performance measure primarily because depreciation expense and non-recurring capital asset impairment charges are not an actual cash cost, and depreciation expense varies widely from company to company in a manner that management considers largely independent of the underlying cost efficiency of our operating facilities. In addition, we believe Operating EBITDA is commonly used by securities analysts, investors and other interested parties to evaluate our financial performance.

Operating EBITDA does not reflect the impact of a number of items that affect our net income (loss), including financing costs and the effect of derivative instruments. Operating EBITDA is not a measure of financial performance under GAAP, and should not be considered as an alternative to net income (loss) or operating income as a measure of performance, nor as an alternative to net cash from (used in) operating activities as a measure of liquidity. The following tables set forth the net income (loss) to Operating EBITDA: