OTCPK:EGOH - Post by User
Post by
AveragePennyon Sep 10, 2021 12:19pm
111 Views
Post# 33840116
Green Stream Holdings, Inc. Begins Application
Green Stream Holdings, Inc. Begins Application Some of the scope of services to be provided by KMB are:
- Coordinate with the client to kick off the projects and ensure receipt and dissemination of pertinent information and to ensure an agreed upon path forward.
- Use existing field survey information in order to determine existing electric service location, conditions, interconnection points, available space for new equipment, and potential feeder routing.
- Review the proposed array size and select appropriate inverters, medium voltage transformers, and other BOS equipment.
- Discussions with Client on preferences, electrical service information, and review of the proposed electrical design.
- Prepare a preliminary three-line diagram for the interconnection, and a site drawing with the following information:
- Site placement
- Module layout
- Inverter and Equipment Locations and Selection
- Anticipated conduit routing and interconnection point
- AC and DC single line preliminary design
KMB will also create Electrical Engineering Construction Drawings, including:
- Upon notice to proceed on the construction documents, KMB will create a full permit/construction drawing set utilizing the layout created in Helioscope, Civil Survey, and the racking design Layouts, and the Interconnection drawings as the basis of design.
- KMB will incorporate any feedback received from the client and utility on the preliminary drawings and layout into the construction drawing set.
- Coordinate with the racking system manufacturer selected by the Client and include details and design intent reflective of their system particulars and needs. The racking support structure shall be the responsibility of the manufacturer.
- Discussions with Client on findings, preferences, any challenges identified, and the proposed electrical design.
- Prepare electrical design and construction documents to include the following:
- Cover sheet with relevant site and project information.
- Site plan with equipment locations, conduit routing, and interconnection location.
- Single-line and three-line diagram of the required distribution system to support the PV system installation.
- Electrical circuiting design and layout for the PV installation including solar module strings, wire sizing, combiners, inverters, meters.
- Perform all required NEC calculations and voltage drop calculations and identify key statistics on drawings.
- Include detail of typical string electrical connection, inverter and PV modules, code required signage, etc.
- Provide DAS wiring schematic based on DAS design drawings provided by DAS manufacturer.