News..Great Summary of Polaris Drilling Results
ORIGINAL: Summary of High-Grade Drill Intercepts in the C-9 and C-10 Veins at the New Polaris Project in BC
2021-11-30 07:31 ET - News Release
VANCOUVER, BC / ACCESSWIRE / November 30, 2021 / Canagold Resources Ltd. (TSX:CCM)(OTCQB:CRCUF)(Frankfurt:CANA)summarizes the expanding number of high-grade drill intercepts that define two hanging-wall veins, the C-9 and C-10 Veins, which are separate from the C-West Main Vein ("CWM"). Most of the current gold resources are located in the CWM Vein so the recent drilling in the C-9 and C-10 Veins should help expand the current gold resources.
The Company's on-going 24,000 meter (m), 47 hole drill program is progressing well at its 100% owned New Polaris Gold project located in northwestern British Columbia, 100 kilometers (km) south of Atlin and 60 km northeast of Juneau, Alaska. Drilling is expected to be completed by year-end and assays are anticipated monthly but final assays could take until late March due to the backlog of samples at all commercial laboratories in Canada.
Several drill holes of this infill drill program have returned significant intercepts of gold mineralization in two hanging-wall veins of the CWM Vein system. Combined with holes previously drilled in 1995 and 2006, the number of intercepts to date include nine in the C-9 vein and thirteen in the C-10 vein. Highlights of the intercepts are shown in Table 1 below. All the drill hole collar information is provided in Table 2 and the mineralized intercepts from both veins in Table 3.
Table 1: C-9 and C-10 Veins Highlight Intercepts:
| Vein | Hole No: | Down-Hole Depth: m | Length (m) * | Au g/t |
| C-9 | P95C42 | 318.6 | 3.8 | 13.7 |
| C-9 | 06-1859E2 | 297.5 | 1.6 | 14.9 |
| C-9 | 21-1844E3 | 414.4 | 8.9 | 11.0 |
| C-9 | 21-1905E2 | 353.6 | 9.9 | 8.10 |
| C-10 | 06-1813E2 | 313.3 | 1.6 | 12.7 |
| C-10 | 06-1859E2 | 336.2 | 2.1 | 15.6 |
| C-10 | 21-1844E3 | 438.7 | 3.0 | 14.5 |
| C-10 | 21-1890E1 | 343.0 | 8.4 | 17.1 |
| C-10 | 21-1905E2 | 380.9 | 17.8 | 11.1 |
* Based on the current spacing of the drill hole intercepts the exact attitude of these veins remains open to interpretation, so the true widths have not been calculated at this time.
Scott Eldridge, CEO and Director, said "The rising number of thick, high grade drill intercepts in the C-9 and C-10 veins from this year's infill drill program is bringing about a rethinking of the economic potential of the other parallel veins in the stacked C vein system. The C-9 and C-10 occur in the southeast lower quadrant of the CWM drill area just west of the No. 1 Fault (See Drill Hole Location Map and Cross Section).
The C-10 vein is the most developed interpretation so far, now extending over 150 m along trend by more than 100 m down dip with downhole thicknesses up to 17.8 m. The downhole intercept of 11.1 gpt Au over 17.8 m is one of the widest mineralized intervals drilled at New Polaris to date. The C-9 has slightly fewer drill intersections but also extends over 150 meters by 100 m with a drilled thickness of up to 9.9 meters."
Based on the current spacing of the drill hole intercepts the exact attitude of these veins remains open to interpretation, so the true widths have not been calculated at this time. The C-9 and C-10 mineralized horizons were observed in at least two more drill holes that have been logged and sampled and are now awaiting assays. Seven additional drill holes are planned to infill the CWM vein in the coming months that should also intersect the C-9 and C-10 veins to expand as well as infill the area of the current drill intercepts. Once the drilling is completed and all assay results are received, the drill holes that intercept the C-9 and C-10 veins can be included in the next resource estimate for New Polaris.
Infill Holes to Upgrade Inferred Resources to Indicated Resources
The current drill program is designed primarily to in-fill drill the Inferred Resources of the CWM vein system within the currently defined resources in the PEA*. The infill drill holes range in depth from 300 to 650 m and are designed to provide greater density of drill intercepts (20 - 25 m spacing) in areas of Inferred Resources between 150 and 600 m below surface. The improved drill density will be used to upgrade parts of the Inferred Resources to Indicated Resources for inclusion in a future feasibility study.
*The New Polaris resource is contained within a preliminary economic assessment ("PEA") report which was prepared by Moose Mountain Technical Services in the format prescribed by NI43-101 Standards of Disclosure for Mineral Projects, and filed on Sedar April 18, 2019.
New Polaris Overview
Canagold's flagship asset is the 100% owned New Polaris Gold Mine project located in northwestern British Columbia about 100 kilometers south of Atlin, BC and 60 kilometers northeast of Juneau, Alaska. The property consists of 61 contiguous Crown-granted mineral claims and one modified grid claim covering 850 hectares. New Polaris lies within the Taku River Tlingit First Nations traditional territory. Canagold is committed to providing employment and business opportunities that help support the local economies in the vicinity of its exploration projects.
The New Polaris gold deposit is an early Tertiary, mesothermal gold-bearing vein system occupying shear zones cross-cutting late Paleozoic andesitic volcanic rocks. It was mined by underground methods from 1938 to 1942, and again from 1946 to early 1951, producing approximately 245,000 oz gold from 740,000 tonnes of ore at an average grade of 10.3 gpt gold. Three main veins ("AB, C and Y") were mined to a maximum depth of 150 m and have been traced by drilling for up to 1,000 m along strike and up to 800 m down dip, still open for expansion. The gold occurs dominantly in finely disseminated arsenopyrite within quartz-carbonate stock-work veins and altered wall-rocks. Individual mineralized zones extend up to 250 meters in length and 14 meters in width. Average widths more commonly range from 2 to 5 meters.
Qualified Person
Garry Biles, P.Eng, President & COO for Canagold Resources Ltd, is the Qualified Person who reviewed and approved the contents of this news release.
Drill Core Sampling and Quality Assurance - Quality Control Program