RE: RE: RE: if this is a pump and dump? NOT SO.*Second point.. Assay results were
in feet.. So you need to adjust
to metre
1m = ~3.3 feet
Assay Results [1]
[1]
https://i.imgur.com/oQhaO.jpg
DH1, DH2 are less than 7m.
DH3, from 350 -530m underground, but TREO% is above 2% for 30m (1157ft-1255ft) and 35m(1552ft-1732ft)
But DH 4-18 // results here.
https://www.marketwire.com/press-release/be-resources-provides-update-on-rare-earth-elements-warm-springs-project-new-mexico-tsx-venture-ber-1506461.htm
notice the results is feet. Also notice the ppm of the desirable REE metals (dysporium, neodynium, parsemonium, europium), which are used in super-magnets for green tech motors.
The ppm are pretty low. And the intersection length (in metres)
*Third point
How was the TREO calculated? Did they calculate it as LREE HREE, + Berrylium? The reason I ask is because it's very unusual for TREO to be that high. Only deposit in the world with such high TREO grade is owned by Lynas, in Australia. I doubt the geology of the area would be amenable to such high TREO.
Our progress to date at Warm Springs has shown that the berylliummineralization is in line with that identified by the US GeologicalService from their exploration in the 1960s," said David Tognoni,President and CEO. "We did not anticipate however the heavy rare earthelements indicated in our recent drilling. We are pleased to find apotential complement to the beryllium and intend to determine if thereis a commercially viable deposit. Given the very large potential tonnageof prospective volcanic rock containing the anomalous rare earthvalues, it could have a positive impact on the potential economics ofthis prospect." [2]
[2] src:
https://www.marketwire.com/press-release/be-resources-provides-update-on-rare-earth-elements-warm-springs-project-new-mexico-tsx-venture-ber-1506461.htm