As Relates, GoldBuyer 100% Agree'sThe credit for this article goes to The Equedia Weekly Letter - November 6th, 2011
Below are excerpts from this letter, that this " GoldBuyer " knows is excellent " dd " on Gold Mines,
and therefore, ( especially for newcomers ) is worth sharing, as it relates .
----------------------------------------------------------------------------------------------------------------------------------------------------
" Unless you truly believe the world's financial system is coming to an end, then
investing in the markets shouldn't keep you up at night - not yet anyway.
As predicted, gold is continuing to climb and I believe that we're about to see
a breakout past $2000 very soon. The gold majors are climbing and the The Market
The biggest risk in the junior mining industry is the need to explore in order to
find and define an economic resource on which a mining project can be built.
Most risk capital is lost in the ground. A study by Mackenzie and Bilodeau (1984)
found that in the period from 1955 to 1978 a total of $1.6 billion had been spent
on exploration (excluding oil and gas) with thousands of mineral occurrences discovered.
However only 43 of these discoveries were considered to be economic, with even fewer
ultimately being developed. That means an average finding cost of $38 million (1984
dollars) is required per deposit. Adjusted for inflation, this number would be over
$100 million.
There's no doubt that our markets are still in turbulent times. If you look at
history and think toward the future, commodities and the stock market will always
be at the forefront of our economic growth. Not only do we need commodities to grow,
we need commodities to survive and we need the stock market to fund those opportunities.
Despite the volatility we have experienced, there are still many opportunities in
the market - especially in the juniors. Don't forget that an insurmountable of funds
were raised in the mining sector even when our stock market was at its lowest point
this year and investors were scrambling to turn paper into cash.
But how do you know what projects are good enough for your investment?
The majority of us aren't geologists, so for us to completely interpret or truly
understand everything in an NI 43-101 report is difficult. Even today, the majority
of geologists still have a hard time putting a resource together or moving a project
from a resource to the feasibility stage. It takes some very special people in this
industry to know where to drill and it takes even more special people to know how
to put it together.
So while we'll never learn everything, it certainly helps to learn the basics. Over
the next few months, I'll go over in more detail how to read 43-101's, how to assess
certain projects, and how to understand drill results in much greater detail.
For now, let's get started with the basics.
Mining Methods
There are many methods of mining but the one most widely used thus far has been
open pit mining. It accounts for more than 80% of mines in the United States.
Open pit/cast/cut or surface mining is a method of extracting ore or mineralization
that is found very close to the surface, with a sufficient quantity of ore within
a close proximity to make it economically viable to extract.
Think of it as digging a large hole in the ground.
Depending on the geometry and depth of the ore body, open pit mining is generally
by far the most economical method of extraction for the recovery of low grade (1g/t
up to around 3-4g/t for gold) finely disseminated ore. Ore is simply the naturally
occurring concentration of minerals.
The advantage of open pit mining, as opposed to underground, is that it is usually
easier, cheaper and quicker to bring into production but generally relies on a larger
resource base due to economical and social reasons. You're digging a big hole in
the ground - it better be worth it.
For example, underground gold mines usually require at least 4-10g/t (grams per
tonne) of gold to be considered economically viable (dependant on a lot of factors
such as country of origin and geophysical locations.)
If you have invested in any mining company, you will have heard the term cut-off
grade. Cut-off grade is the minimum metal grade at which a tonne of rock can be
processed on an economic basis and determines the workable tonnage of an ore. In
Canada, resource calculations under the 43-101 standard will always include the
cut-off grade. (I will go into more detail regarding this extremely important factor
in a future letter.)
Companies determine what it costs per ton of material mined and what the ore values
is going to be from that tonne. From this, they can determine how much each ounce
of gold will cost to mine. For example, in South Africa, the cost to mine is generally
between $300-$400 per ounce of gold. At today's current gold price, that is a very
profitable operation - and a reason why companies in this region do really well.
However, even with a strong resource, you still have to factor in the size of the
mine and what it costs to put the mine into production. Even if you have a small
resource that costs less than $400/oz to mine, there is a great chance that financiers
may not find the project large enough for their appetite, and thus the mine will
not go into production - even at today's high prices.
Let's not forget that you still need approval from the government to proceed. They
won't let you pollute their land and water without adequate and substantial economic
benefit.
In short, a mine that appears feasible by the numbers may still not go into production
- so don't expect every company with a promising NI 43-101 resource to get there.
Before full on production can take place, there are many costly steps involved with
bringing a mine into production, even if it is open pit. You have to identify the
resource through various sampling methods, determine cut-off grades, and conduct
a full on feasibility study before you can even come close to production.
Some key points to focus on (in most cases) include:
* High Grade Levels - the higher the grade level of ore, the better the project
* Cut-Off Grades, Low vs. High - Cut-off grades are essential to determining the
economic feasibility and mine life of a project. Increased cut-off grades can
reduce political risks by ensuring higher financial returns over a shorter period
of time. Conversely, lower cut-off grades may increase project life with longer
economic benefits to shareholders, employees, and local communities. In short,
a low cut-off grade does not mean a poor project.
* Easy Access - having easy access to infrastructure including water, electricity,
and work force cuts down project costs significantly
* Proximity to Producing Mines - the closer the proximity to a producer, the less
the infrastructure costs may be
* Indicated and Inferred in NI 43-101's - Indicated estimate has a higher confidence
level that such resources exists by estimating from sampling at places spaced
closely enough that its continuity can be reasonably assumed. Inferred estimate
is an estimate of resource whose size and grade have been estimated mainly or
wholly from limited sampling data, assuming that the mineralized body is continuous
and thus less confidence is placed on the data
* Never Rely on Estimates Alone - both indicated and inferred resource estimates
in NI 43-101's DOES NOT factor in the feasibility of its resources
* Place of Operation - a great resource is one thing, but a resource located in
an unstable country with an unstable government can spell disaster
* Access to Capital - a well funded company usually means other professionals
not only have done their research but believe in the project
* Great Management Team - a project can be great but ultimately, a management has
to be able to execute
Mineable mineral deposits are rare and to bring a deposit into profitable production
is even more so. The chances of bringing a raw prospect into production have been
estimated at one in 5,000 to 10,000. That's why there are many instances in which
mining companies have revived old prospects and drilled just one more time before
a discovery was made.
The great news is that with recent technological advances and the continual growth
of resource prices, many projects with low grade ores and past producers are now
becoming more economically viable.
Yet, few mining companies have the financial resources to delineate ore reserves
too far into the future, which is why the big guns, such as Barrick, continually
seek out and invest in other gold juniors to increase their reserves. This is yet
another reason why a junior with a nearby producer has a much higher chance of going
into production because the costs of production are often too high for a junior
to fund by themselves. Economies of scale is a big asset in the mining industry;
the ability to use someone else's tailings dam or processing mill can save a junior
millions.
Feasibility Studies
There is a common misconception surrounding feasibility studies. We know they're
important but their significance is commonly misconstrued. Make one mistake or
skip one step of the process and it can have detrimental effects on a mining project.
A mining feasibility study, in short, is an evaluation of a proposed mining project
to determine if the mineral resource can be mined economically. But there are many
stages of this process before the actual feasibility study or report is finalized.
First off, there are three main feasibility studies: the scoping study, preliminary
feasibility and detailed feasibility.
The first one is the order of magnitude, conceptual or what we investors generally
call it, a scoping study or Preliminary Economic Assessment (PEA)
Scoping Study or PEA
This first step in the feasibility process is the initial financial appraisal of
an indicated mineral resource. This study usually begins once a sufficient level
of drilling and sampling to define a resource has been completed, such as a NI 43-101
in Canada. Scoping studies are developed by copying plans and factoring known costs
from industry standards and comparable historical data.
It involves a preliminary mine plan, and is the basis for determining whether or
not to proceed with an exploration program, and more detailed engineering work.
The end result of the study is a description of the general features and parameters
of the project and an order of magnitude estimate of capital and operating costs.
A study of this level is valid to determine whether a project is worth pursuing
further but not enough data has been collected for reserve definition. This study
is generally 35 -50% accurate.
Don't mistake the term mineral reserves for mineral resources.
Mineral resource is a guess of what's in the ground such as the indicated and inferred
resources found in NI 43-101's. Mineral reserve, on the other hand, is the resource
known to be economically feasible for extraction. Few projects survive this part
of the study.
The next stage after this is the preliminary feasibility study or "prefeasibility
study."
Prefeasibility Study
This study determines the mining and milling extraction methods and rates, the product
recoveries, environmental and permitting issues, and preliminary capital and operating
cost estimates. It also determines whether or not to proceed with a detailed feasibility
study, which is very costly.
As part of this process, areas of concern that need further research during the
feasibility stage need to be identified. These areas often include geotechnical
studies for mine, waste dumps, and tailings facilities design, metallurgical testing
for refining estimates of product recoveries, and waste characterization studies.
Identifying these items at this stage can avoid costly delays during the feasibility
stage - any additional delays and costs can be detrimental to a project which often
translates to shareholders directly. Added costs mean further funding may be required
and could add further dilution to shareholders.
Depending upon the level of detail in these studies, and the securities exchange
that is involved, reserves can, in some cases, be declared at this point.
This preliminary feasibility study is usually 20-30% accurate and only 50% of the
companies that go through this stage pass onto the final stage of the feasibility
study or what many call the "bankable" study.
Bankable Feasibility
Detailed or "bankable" feasibility studies are the most detailed and usually determines
whether or not to proceed with the project. General industry standards of this study
results in estimates that are within 15 percent accurate.
In essence, this stage is simply a refinement of the pre-feasibility study, which
evolved from the scoping study. Key components in the feasibility study are the
mine design, production schedule, a detailed process flow sheet, product recoveries,
a detailed plant design, consideration of the environmental issues, detailed capital
and operating costs estimates, and an economic model of the project. Each of these
components is EXTREMELY important.
If a company can make it this far and is feasible after this stage, they can generally
take this study to the "bank" for financing purposes.
At this point there is sufficient information to declare reserves, provided the
project has positive economics and is noted as bankable. However investors always
seem to forget that "bankable" describes only the level of accuracy of the analysis
and not necessarily the outcome of the project.
As I said, just because a project is feasible, doesn't mean it will get the go ahead
for production. Just because a feasible project can make money, the return on investment
may not be enough for the company to advance the project.
For example, the profit from the mine may be $100 million but it may cost $95 million
to build it out. So is it feasible? Yes. But does it make sense to spend $100 million
to make $5 million? I doubt it.
If the benefits do not significantly outweigh the costs, not only may the government
deny you permits, but your financiers may pull out.
At this feasibility level, roughly 20% of the companies will fail, and of these
most fail as a result of either overly optimistic assumptions or skipped steps.
For this step to be successful, the scoping study and the pre-feasibility study
must be conducted at reasonable estimates; many companies will conduct more than
one scoping study to ensure the accuracy of the data.
I have seen companies shell out a lot more cash and time than they needed to once
they hit this stage because they over emphasized their scoping and pre-feasibility
studies.
A great emphasis needs to be placed on each and every step with new rules and regulations
constantly changing the way feasibilities are done (welcome to the world of regulation).
While much of what I covered this week seems simple, it is imperative that investors
in the mining sector have a basic concept of why they're investing in certain companies.
While I am continuing to buy majors such as Barrick, Eldorado, or Kinross as a way
to play the gold boom, the same cannot be said about investing in gold juniors -
especially not in this market.
In this market, capital will be fuelled into projects that have a high hope of success
- not just a play on some overly promoted drill results. "
=============================================================================
I couldn't possibly, agree more ... " Successful Investing to All "
" GoldBuyer "
-------------------------------------------------------------------------------------------------------------------------------------