RE:Re re deposit sizeLOL....I suggest you read NXE's presentation more carefully as it gives zone length, height and range of widths. Regarding the widths you can average them. for overall zone size, as the morphology is roughly triangular, divide area by 2, and then multiply by average width. For overall weighted average grade for each zone, multiply assay x length for each hole, total assay-length numbers, divide by total of length for assayed intervals and this will give a very good approximation of overall average grade. I calculate about 1.02% for zone 3 and 2.93 % for one A2. I also used a rock density of only 2.6 for entire zones which is conservative.....
toriddog wrote: Exactly ! Please advise the other number! Every other drill report all three-dimensions are very clear. If it is there I can't find it and this is required before spouting off big numbers.