RE:RE:Hole 505Regarding your post whether the deeper zone interesected could be a vms zone it is highly unlikely. there are a lot of fluids moving up the faults in the area from deeper zones. These epithermal deposits are a lower temperature deposit and we are seeing a lot of alteration in the highly faulted area that sic is drilling. that is good for gold emplacement and associated minerals. it probably will vary quite a bit on which minerals get deposited with the gold depending where the fluids are coming from at depth and which fault. finding altered potential gold bearing zones deeper is good news. these type of deposits are harder to define from surface as you get deeper due to the tight spacing you need to define the gold bearing zones. increased cost and trying to intercept the zones at the spacing between holes. holes deviating and hitting your targets becomes more difficult. what we are hoping for here is enough gold reserves at a relatively shallow depth to get a minable gold reserve. i think sic is well on the way to doing that. so far they have had good success and are getting some excellent results overall. let's hope it continues. just my opinion but hope this helps. i am still bullish on the moosehead proprty to get a minable gold property.