Talon Metals Corp reveals another round of high-grade drill results from its Tamarack nickel-copper-cobalt project in Minnesota (paidpromotionalmessages.com) “The hits just keep on coming – the Talon exploration team is consistently hitting high-grade massive sulphides during the Tamarack drill program,” said Etienne Dinel, Ph.D, P.Geo Vice President Geology at Talon. Dinel added: “All of the drill holes reported today fall outside of the Tamarack Nickel Project’s main resource area and are expected to increase the size and extent of the known nickel and copper resource at Tamarack.” CGO West Summary The CGO West area lies approximately 100 meters north-north-east of the Tamarack Nickel Project’s resource area and extends for an additional 400 meters where drilling shows the presence of shallow, high-grade nickel-copper mineralization. The thick intersections of mixed and massive sulphides are found at the base of the overlying Fine-grained Orthocumulate (“FGO”) and Coarse-grained Orthocumulate (“CGO”) intrusions. Figure 2. Plan view geological map of the northern portion of the Tamarack Nickel Project showing the new nickel-copper mineralization intervals in green text boxes in the CGO West area Figure 3: Section A represents a portion of the CGO West area looking east showing the thick intersections of nickel-copper mineralization found in drill holes 21TK0316, 21TK0320 and 21TK0333 Figure 4: Section B represents a portion of the CGO West area looking east showing the thick intersections of nickel-copper mineralization found in drill holes 21TK0299, 21TK0323, 21TK0329 and 21TK0336. Table 1: Collar Locations of New Drill Holes Referred to in this Press Release CGO WEST HOLEID Easting (m) Northing (m) Elevation (masl) Azimuth Dip End Depth (m) 21TK0299 491108.8 5169252.7 388.0 0.5 -65.9 187.3 21TK0316 491069.4 5169033.6 388.0 308.9 -54.1 313.9 21TK0323 491077.7 5169039.1 388.5 358.8 -72.0 249.3 21TK0329 491074.0 5169043.0 388.0 20.0 -66.0 228.0 21TK0320 491008.4 5168962.4 388.8 340.2 -53.5 293.1 21TK0331 491060.0 5169035.0 388.0 333.8 -72.6 277.4 21TK0332 491060.0 5169035.0 388.0 355.7 -71.2 231.7 21TK0333 491008.0 5168963.0 388.0 336.3 -56.2 403.9 21TK0334 491060.0 5169036.0 388.0 326.2 -65.5 324.9 21TK0335 491142.0 5169176.0 388.0 215.7 -70.0 219.5 21TK0336 491009.0 5168963.0 388.0 25.5 -59.0 295.1 Collar coordinates are UTM Zone 15N, NAD83 Azimuths and dips are taken from survey record at collar unless otherwise noted Table 2: Assay Results of New Drill Holes Referred to in this Press Release Drill Hole From To Length ResultsLength refers to drill hole length and not True Width. True Width is unknown at the time of publication. All samples were analysed by ALS Minerals. Nickel, copper, and cobalt grades were first analysed by a 4-acid digestion and ICP AES (MEMS61). Grades reporting greater than 0.25% Ni and/or 0.1% Cu, using ME-MS61, trigger a sodium peroxide fusion with ICP-AES finish (ICP81). Platinum, palladium and gold are initially analyzed by a 50g fire assay with an ICP-MS finish (PGM-MS24). Any samples reporting >1g/t Pt or Pd trigger an over-limit analysis by ICP-AES finish (PGM-ICP27) and any samples reporting >1g/t Au trigger an over-limit analysis by AAS (Au-AA26). NiEq% = Ni%+ Cu% x $3.00/$8.00 + Co% x $12.00/$8.00 + Pt [g/t]/31.103 x $1,300/$8.00/22.04 + Pd [g/t]/31.103 x $700/$8.00/22.04 + Au [g/t]/31.103 x $1,200/$8.00/22.04 CuEq% = Cu%+ Ni% x $8.00/$3.00 + Co% x $12.00/$3.00 + Pt [g/t]/31.103 x $1,300/$3.00/22.04 + Pd [g/t]/31.103 x $700/$3.00/22.04 + Au [g/t]/31.103 x $1,200/$3.00/22.04 No adjustments were made for recovery or payability.
QUALITY ASSURANCE, QUALITY CONTROL AND QUALIFIED PERSONS Please see the technical report entitled “NI 43-101 Technical Report Updated Preliminary Economic Assessment (PEA) #3 of the Tamarack North Project – Tamarack, Minnesota” with an effective date of January 8, 2021 prepared by independent “Qualified Persons” (as that term is defined in National Instrument 43-101 (“NI 43-101”) Leslie Correia (Pr. Eng), Andre-Francois Gravel (P. Eng.), Tim Fletcher (P. Eng.), Daniel Gagnon (P. Eng.), David Ritchie (P. Eng.), Oliver Peters (P. Eng.), Volodymyr Liskovych (P.Eng.), Andrea Martin (P. E.) and Brian Thomas (P. Geo.) for information on the QA/QC, analytical and testing procedures at the Tamarack Project. Copies are available on the Company’s website (www.talonmetals.com) or on SEDAR at (www.sedar.com). The laboratory used is ALS Minerals who is independent of the Company. Lengths are drill intersections and not necessarily true widths. True widths cannot be consistently calculated for comparison purposes between holes because of the irregular shapes of the mineralized zones. Drill intersections have been independently selected by Talon. Drill composites have been independently calculated by Talon. The geological interpretations in this news release are solely those of the Company. The locations and distances highlighted on all maps in this news release are approximate. Dr. Etienne Dinel, Vice President, Geology of Talon, is a Qualified Person within the meaning of NI 43- 101. Dr. Dinel is satisfied that the analytical and testing procedures used are standard industry operating procedures and methodologies, and he has reviewed, approved and verified the technical information disclosed in this news release, including sampling, analytical and test data underlying the technical information.