......nothing official, just my opinion,..Keeping in PERSPECTIVE here, the historic drill core, not all from Storm at this time ,Only the drill core around 2750n seeing the current in-fill drilling showen here on slide ...,,
...SO, a 43-101, has 3 catergories on the resource side, and 3 on the reserve side,..BAY, with in-fill drilling will be-able to use the Historic copper grades if, if, if the in-fill holes show continuity between holes...
..SO,..vissuals indicated continuation of the copper between holes seeing here on slide..The news said that the distance between drill core of 330 feet deep and hole of 162 feet showing over 3% or 60 pounds was over 100meters apart or 300 feet..
...SO,..an official ni-43-101 say's if continuity is proven over over 25m drill core and continues over 100m and again proven to continue through drill core at depth and direction,.Then an indicated resource can be done..By, BY an official scientific geologist usualy in-dependent of company..
..BAY, with this new drill core, will be able to calculate an ni-43-101..SO,.In the meantime,lets plunck a few numbers here on the checker board with the dark green squares being the historic core and the new core being the light green core...Now notice on slide below here showing configuation of old holes being in black and holes pending in yellow.Top of board being Norh on compass..
..SO,..taking the Historic 330 foot deep hole showing 50 pounds per ton, Lets plunck this hole, Counting down 2 dark squars from North and 2 dark squars from East going West so 2 dark down and 2 dark over from right..The hole showing 3.7 % copper , plunck this hole 3 dark down from top and 2nd row over from West going East ..
..SO now, from Historic, this slide does not show all previous drilling done, but all holes in this area would likly fill in all the dark green squars..The in-fill drilling current 6 holes looking at slide here below, pluck these yellow holes into the light green squares..
..SO,..,.. now we have the makings of a ni-43-101, as the numbers are released add them in-to your checker-board...The continuity between the dark holes and light holes must indicate the grade and tonnage as such then ..
...Due we have an indicated reserve at Surface..So-far the core say"s yes..The Lab indicates yes, The Hopper can bag and tye,..The ship is on stand-by, as Findland whants the copper..
lets......... 
....
Figure 3: Plan of the 2750N Zone - Drilling, known mineralization and known copper gossans overlaying aerial photography. Note that the 2750N Zone and the gossan to the west are cut by a gully (interpreted fault).
Traps7,,,without prejudice