.sorry cannot copy awm news as Stated, must have permission..This news is hole # 5 only as some one mention 3 holes,.The hole shows 3 different sections of grading but taking the total lenght of 41 meters of 4% would be including the gaps in veinging being strip ratio for that section of ore..
..IN MY OPINION,. looking at checker board , as being a cad for purpose of doing a 43-101 , Take the historic holes numbers and fill in the black squares on checker board, hole of historic 110 meters would fill in a black square..
PS,.Look at slide below here and notice the red section of 2750n markings and notice the yellow circles which are the new drill holes were waiting on ,.Now we have to-day hole #5 which totals 41meters of 4% copper. Plunk this hole on the checker board on white square
...Hole $ $ $ ...5, Back of Cuff...simple math,..4% per 2000 lb = 80 pounds True width of vein is 35meters spec gravity 5.. hole spacing 75m
PS,..This hole #5 is an in=fill hole which continues the continuity of copper through out the 2750 which so-far all holes hit then the checker board will be fill in with a high grade and or large copper ton-nage.....
..Traps7.
.