Copper Porphyry Discovery..Excellent Probability Conversion Drilling intersects multiple zones of extensive copper mineralization up to 210.8 m in length
North Vancouver, British Columbia--(Newsfile Corp. - March 4, 2024) - Lion One Metals Limited (TSXV: LIO) (OTCQX: LOMLF) (ASX: LLO) ("Lion One" or the "Company") is pleased to announce the discovery of copper porphyry-style mineralization in a newly identified mineralized system 1 km northeast of the company's 100% owned Tuvatu Alkaline Gold Project in Fiji.
Porphyry style mineralization was discovered from surface drilling at the Wailoaloa prospect as part of the company's regional exploration program.
Bench sampling in the area revealed a wide stockwork area of anomalous copper, gold and tellurium mineralization at surface.
An initial drillhole (TUDDH-662) was designed to follow up the surface results.
The Lion One geological team identified porphyry-style mineralization and alteration downhole and three subsequent drillholes were drilled to follow-up this discovery: TUDDH-669, TUDDH-679, and TUDDH-687.
The last of these drillholes, TUDDH-687, intersected three separate zones of anomalous copper mineralization, ranging from over 120 m to over 200 m in downhole length.
Copper mineralization is strongly correlated with anomalous gold mineralization downhole.
Pervasive propylitic and potassic alteration was observed in TUDDH-687 with the intensity of potassic alteration increasing with depth down the hole.
Copper mineralization occurs as chalcopyrite, bornite, and native copper.
Mineralization remains open in all directions.
The discovery of copper porphyry mineralization at Tuvatu is an exciting development for the company.
The Navilawa Caldera is known to host high-grade alkaline gold mineralization yet it has also been explored historically for copper.
A large copper-gold system has long been hypothesized at depth.
The drill holes included in this news release represent the first drill holes ever drilled to test for such a porphyry target.
To have intersected multiple zones of extended copper mineralization at this stage of the Wailoaloa exploration program is very encouraging and indicates the potential for a much larger system nearby.
Table 1. Highlights of exploration drilling at Wailoaloa. For full results see Table 3 and Table 4 in the Appendix.
| Hole ID | From | To | Interval (m) | Cu (%) |
| TUDDH-662 | 110.8 | 274.0 | 163.2 | 0.17 |
| TUDDH-687 | 0.0 | 210.8 | 210.8 | 0.13 |
| TUDDH-687 | 377.8 | 525.2 | 147.4 | 0.15 |
| TUDDH-687 | 658.1 | 785.9 | 127.8 | 0.12 |
Figure 1. Plan View of Wailoaloa Drillholes in Relation to Tuvatu. The Wailoaloa discovery is approximately 1 km northeast of Tuvatu. Underground development at Tuvatu are shown in red.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/200282_708085a0c4110b4f_001full.jpg
Figure 2. Cross-Section of the Wailoaloa Drillholes, Looking East. Zones of elevated copper mineralization are shown in red boxes. Three zones of anomalous copper mineralization are observed in TUDDH-687, and one in TUDDH-662. TUDDH-662 and TUDDH-687 both terminated in anomalous copper mineralization.
Assays are pending for drillholes TUDDH-669 and TUDDH-679.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/200282_708085a0c4110b4f_002full.jpg
Geology
Surface sampling in the Wailoaloa area led to the discovery of a widespread zone of weakly to moderately anomalous gold associated with a strong copper anomaly.
Mineralization is controlled by a large stockwork system with a minimum proven surface extent of 150 m N-S by 100 m E-W. The stockwork system dips steeply to the south.
Numerous copper showings have been identified in a wide halo around the Wailoaloa prospect, including strong malachite staining after chalcopyrite in the historic Qalibua adit 250 m to the northwest of Wailoaloa.
This suggests a system of potentially considerable size.
Additional copper showings have also been identified throughout the Navilawa Caldera, such as the historic Kingston adit as well as the Matanavatu showings, 1800 m northwest and 1500 m north of Wailoaloa respectively.
TUDDH-662
TUDDH-662 was the first drill hole designed to test the surface copper anomaly at Wailoaloa. The lithology down hole consists dominantly of alternating unsorted to poorly sorted polymictic volcanic breccia with lesser massive monzonite. The volcanic breccia includes alkaline monzonite, porphyry, and re-worked breccia clasts, with gradational zones of finer grain material. It is cross-cut locally by monomictic clast-supported hydrothermal breccias with strongly bleached angular to sub-rounded clasts, as well as monzonite intrusives and late-stage unaltered pyroxene porphyry dykes.
Drill hole TUDDH-662 intersected one major zone of elevated copper mineralization, averaging 0.17% Cu over 163.2 m from 110.8 m to 274.0 m depth with a peak copper value of 1.0%.
This zone coincides both with an abundance of secondary cross-cutting stockwork veinlets and with intense bleaching that overprints the background propylitic alteration.
Chalcopyrite mineralization occurs within the stockwork veinlets as well as finely disseminated throughout the zone.
TUDDH-687
TUDDH-687 was the fourth and final drillhole drilled at the Wailoaloa prospect before the onset of the wet season in Fiji. It was drilled in a south-southeast direction based on surface structural measurements and oriented drill core measurements from TUDDH-662.
The lithology in TUDDH-687 consists primarily of unsorted to poorly sorted, polymictic, matrix-supported volcanic breccia with an overall clast to matrix ratio of 70:30, with rare intervals of hydrothermal cement up to several meters in width. The volcanic breccia is locally intersected by monzonite dykes and late pyroxene porphyry dykes, similar to TUDDH-662.
Alteration throughout the hole progresses from outer propylitic in the upper part of the hole to potassic in the bottom part of the hole, with patches of intense bleaching. The outer propylitic alteration in the upper part of the hole occurs as widespread patchy to pervasive epidote-chlorite alteration with intervals of intense silica-sericite bleaching. Copper mineralization in this part of the hole occurs as cryptic hairline veinlets of chalcopyrite.
This corresponds to the first major zone of copper mineralization in TUDDH-687, with the top 210.8 m of the hole returning a composite grade of 0.13% Cu.
The second major zone of copper mineralization occurs from 377.8 m to 525.2 m downhole and returned a composite grade of 0.15% Cu.
This interval corresponds to an increase in alteration from pervasive bleaching (propylitic) to an assemblage of potassic feldspar, magnetite, and possibly tremolite (inner propylitic to potassic and calc-potassic alteration). Here, thin but distinct B-type veins of quartz-bornite and quartz-chalcopyrite-bornite are observed. The presence of blebby disseminated bornite and (rare) patchy native copper is a distinctive feature of TUDDH-687.
The third major zone of copper mineralization, grading 0.12% Cu from 658.1 m to 785.9 m, is dominated by intense texturally-destructive K-feldspar-magnetite alteration with coarse crystalline secondary anhedral "shreddy" biotite.
Late, discrete sericite-silica-pyrite veinlets which overprint potassic alteration assemblages throughout the sequence suggest evidence of multiple overprinting alteration events.
Surface Sampling
Lion One Metals completed surface sampling programs in the Wailoaloa area in 2019 and again in 2023 as part of the regional exploration program, consisting primarily of bench sampling along newly excavated access trails.
A total of 443 samples are included in this news release (Table 6), focused on the Wailoaloa drill area.
Of these samples, 72 (16%) returned copper grades in excess of 2000 ppm, and 141 (32%) returned copper grades in excess of 1000 ppm.
Copper grades above 500 ppm are considered anomalous.
The Wailoaloa area is therefore strongly anomalous in copper.
The surface copper anomaly outlined by the Wailoaloa sampling is 150 m by 100 m in size and may be expanded further with additional sampling.
Figure 3. Plan View of Wailoaloa Drillholes in Relation to Surface Sampling Results. Bench sampling in the Wailoaloa area from 2019 to 2023 revealed a strong surface copper anomaly approximately 150 m x 100 m in size.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/2178/200282_708085a0c4110b4f_003full.jpg
Table 2. Top 10 Copper Results from Surface Sampling at Wailoaloa. For full results see Table 6 in the Appendix.
| Sample ID | Cu (ppm) | Au (ppm) |
| TUS010518 | 7570 | 0.28 |
| TUS010474 | 6540 | 0.30 |
| TUS010475 | 6070 | 1.09 |
| TUS010397 | 5750 | 0.18 |
| TUS010183 | 5740 | 0.08 |
| TUS010488 | 5280 | 0.11 |
| TUS010520 | 5210 | 0.79 |
| TUS010490 | 5130 | 0.09 |
| TUS010207 | 4860 | 0.79 |
| TUS010476 | 4810 | 0.92 |
Figure 4. Example Mineralization from Wailoaloa Drillholes. Top left: Coarse bornite veinlet within patch of intense potassic alteration (TUDDH-687, 709.5 m). Top middle: Inner propylitic alteration with silica stockwork veining and coarse blebs of chalcopyrite (TUDDH-687, 732.5 m). Top right: Stringers and blebs of magnetite (TUDDH-687, 739.9 m). Bottom left: Magnetite stringer crosscut by chalcopyrite-bornite veinlet (TUDDH-687, 758 m). Bottom center: Potassium feldspar vein with microcrystalline chalcopyrite within potassically altered host with secondary biotite alteration (TUDDH-687, 745 m). Bottom right: Specks of native copper (circled in red) associated with quartz-epidote vein with yellow sericite selvage (TUDDH-687, 703 m). Width of core is 4.76 cm in each photo.