VANCOUVER, BRITISH COLUMBIA--(Marketwired - July 27, 2016) - Unity Energy Corp. (TSX
VENTURE:UTY)(FRANKFURT:UJN2) ("Unity" or the "Company") is pleased to announce that it
has received chemical analysis from its first pass drilling and sampling program on its 100% owned Miller's Crossing Lithium
Project in Esmeralda County, Nevada. The drilling was intended to follow up on positive surface sampling, which was carried out
in April 2016 and confirmed presence of lithium in alluvial gravels and clays. A total of 7 holes were completed, generating 22
intersections of interest. All holes encountered brown clays as well as silty brown sands and grey fine to coarse-grained sand.
In addition, two water samples were collected where the water table was encountered within the drill-hole as well as two
anomalous salt samples at surface.
The highest lithium values returned was 100ppm from a surface salt evaporate sample, while other anomalous values were as
follows:
| Sample Number |
Sample Description |
Source |
Li (ppm) |
| MLH16-SLT-03 |
Salt |
Surface Evaporate |
100 |
| MLH16-33-01 |
Sand and clay |
Core |
64 |
| MLH16-36-01 |
Sand and clay |
Core |
57 |
| MLH16-SLT-01 |
Salt |
Surface Evaporate |
48 |
| MLH16-25-03 |
Sand and clay |
Core |
44 |
The deepest test hole reached a depth of approximately 8m and anomalous lithium values were detected throughout the
near-surface sediment column. The Company intends to follow up this reconnaissance drilling with a surface IP survey and, if
warranted, to conduct deeper exploratory drilling to test brine water for lithium enrichment.
Regarding the completion of the drill program, CEO Ian Graham commented, "These are encouraging results which certainly
justify further exploration in this emerging lithium camp. We are currently filing permit applications for the ground survey,
which is expected to commence in the fall."
Samples were shipped to Western Environmental Testing Laboratory in Sparks, Nevada, which is an USEPA accredited independent
laboratory. The samples were analyzed for lithium, potassium and boron, using Test Methods for Evaluation of Solid Waste,
Physical/Chemical Methods (SW846), Third Edition. The laboratory used its own quality control and quality assurance protocols for
sample analysis.
The technical contents of this news release have been prepared under the supervision of Dr. Peter Born, P. Geo. Dr. Born is a
Qualified Person, as that term is defined in National Instrument 43-101, and has approved this news release.
For more information, visit www.unityenergycorp.com.
On Behalf of the Company,
Anita Algie, President
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.