MGI-16-415 intersects 3.1g/t Au, 10.7g/t Ag & 0.49% Sb over 42.7m (4.2g/t AuEq(3))
MGI-16-417 intersects 2.2g/t Au, 8.0g/t Ag & 0.46% Sb over 122.5m (3.2g/t AuEq(3))
VANCOUVER, BC--(Marketwired - January 23, 2017) - Midas Gold
Corp. (TSX: MAX) (OTCQX: MDRPF) today announced that it
has resumed its resource optimization drill program at the Stibnite Gold Project, Idaho. In addition, Midas Gold reported results
from holes completed in late 2016 as part of this program, which has the goal of improving, expanding and de-risking the mineral
resources defined in the December 2014 preliminary feasibility study ("PFS") before commencing a feasibility study ("FS"); all
three of these goals were achieved with these latest results.
Assay results have been received for two drill holes completed at the southern end of the Yellow Pine deposit and a third
drill hole completed in the central portion of the same deposit. Highlights of the drill holes are tabulated below, while
complete results are attached at the end of the press release.
Highlights of Recent Assay Results - Yellow Pine Deposit, Stibnite Gold
Project |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hole ID |
|
Type |
|
From |
|
To |
|
Interval |
|
Gold |
|
Silver |
|
Antimony |
|
AuEq |
|
|
|
|
(m) |
|
(m) |
|
(m) (1) |
|
(g/t) (2) |
|
(g/t) |
|
(%) |
|
(g/t) (3) |
MGI-16-415 |
|
Core |
|
62.5 |
|
105.2 |
|
42.7 |
|
3.12 |
|
10.7 |
|
0.49 |
|
4.2 |
|
and |
|
|
|
108.2 |
|
114.3 |
|
6.1 |
|
0.99 |
|
68.7 |
|
3.49 |
|
8.8 |
MGI-16-417 |
|
Core |
|
0 |
|
122.5 |
|
122.5 |
|
2.21 |
|
8.0 |
|
0.46 |
|
3.2 |
|
including |
|
|
|
3.6 |
|
32.6 |
|
29.0 |
|
2.28 |
|
26.5 |
|
1.53 |
|
5.7 |
(1) The reported drill hole intercept widths are oblique to the mineralized
structure. True width is approximately 75-85% of intercept width. |
(2) Gold composites are generated using a 0.5 g/t Au cutoff
grade. Antimony composites are generated using a 0.1% Sb cutoff grade. Composites may include intervals
below cutoff grades. |
(3) Gold equivalent grades are reported for illustrative purposes only
and are calculated using metal prices of $1200/oz Au, $17/oz Ag and $7600/tonne Sb and do not include recovery,
transportation, refining or payability. These factors will vary for each metal and affect the economic importance
of the various metals. |
Hole MGI-16-415 intersected substantially higher grades than were anticipated (based on legacy underground exploration
drilling from the 1940s), while MGI-16-416 was angled obliquely, but missed the target area and will need to be re-drilled at a
slightly different angle in order to intersect the target. Hole MGI-16-417 targeted an area with little Midas Gold data,
intersected slightly higher grades than anticipated, and verified the location of an important post-mineral structure.
"These latest drill results realized all three of Midas Gold's goals for its resource enhancement drill program at the
Stibnite Gold Project: expanding the mineral resource, improving confidence in the geological model, and improving margin by
identifying higher grade material within the proposed pit limits," said Stephen Quin, President & CEO of Midas Gold Corp. "Hole
MGI-16-415 successfully extended the limits of known high-grade gold-antimony mineralization over 50m to the south, in an area
within the limits of the 2014 PFS mineral reserve pit limits, but which had been treated as development rock in the PFS. Hole
MGI-16-417 generally verified the mineral resource and provided important structural constraints on mineralization."
Drilling in 2017, which recently commenced, will be focused on the Yellow Pine deposit, initially following up on encouraging
results from MGI-16-414 and MGI-16-417. Additional shallow inclination drill holes are planned to obtain additional data beneath
the historical pit lake and to improve understanding of geological controls on high-grade gold and antimony mineralization.
South Yellow Pine Drilling
The Monday Tunnel was driven in 1928-1932 from the south end of the Yellow Pine Pit along the trace of the Meadow Creek Fault
Zone ("MCFZ"), the District scale structure that forms the eastern boundary of the Yellow Pine ore-body. In the 1940s, eight
small diameter underground core holes financed by the US Government's Defense Minerals Exploration Agency were completed in this
area, focused on exploration for antimony and tungsten. The 2014 PFS geologic model for the southern section of the Yellow Pine
deposit was partially based on this legacy underground drilling and the mineralization was modeled as inferred mineralization and
subsequently treated as development rock in the 2014 PFS economic model. Drill hole MGI-16-415 returned gold grades approximately
twice those carried as inferred mineralization in the 2014 PFS block model (3.12g/t Au in current drilling versus 1.6g/t Au
predicted) with substantially higher antimony grades as well. The drill hole intercept was approximately 30% shorter than was
predicted in the block model and the differences are likely due to better core recovery and sampling methodology in the
modern-era drilling versus the older legacy drilling.
"This higher-grade gold and antimony mineralization at the south end of the Yellow Pine deposit represents an economically
attractive resource expansion target within and immediately adjacent to the proposed open pit and warrants additional drilling,"
said Mr. Quin.
The second drill hole, MGI-16-416, was drilled in a more southerly direction, sub-parallel to the target zone, but did not
penetrate the mineralized corridor of the Meadow Creek Fault Zone. Historical drilling from surface and in legacy underground
workings in this area suggest this hole just missed the target. Additional drilling is being considered to intersect and extend
the known limits of the mineralized zone farther to the south.
Central Yellow Pine
Drill hole MGI-16-417 was drilled to obtain additional information beneath the historical Yellow Pine pit in order to replace
legacy data and to test for continuity of an important post-mineralization fault in the deposit. The drill hole generally
confirmed the grades estimated in the 2014 PFS block model, returning approximately 5% higher gold grades, as well as higher
antimony grades. Sub-economic inferred mineralization in the footwall of the post-mineralization fault was not confirmed, which
has no impact on project economics.
High Grade Antimony Mineralization
Both MGI-16-415 and MGI-16-417 intersected multiple sets of narrow, high grade antimony veins within broader zones of lower
grade stockwork and disseminated gold mineralization. These vein intersections and their orientations are consistent with newly
developed geologic concepts for the Yellow Pine deposit that are based on Midas Gold work and age dating studies conducted by
researchers at the Idaho Geological Survey and U.S. Geological Survey. This work suggests that the antimony vein systems have
overprinted earlier, more disseminated, gold mineralization may be related to a separate mineralizing event. The implications,
confirmed by the oriented core data from these holes, also indicate more focused drilling at appropriate orientations may provide
evidence for continuity to these high-grade Stibnite vein systems, which can run multi-percent antimony, and could enhance
project economics.
Details of the previous news releases, the Project and the 2014 Prefeasibility Study can be found filed under Midas Gold's
profile on SEDAR (www.sedar.com) or at www.midasgoldcorp.com.
To view a cross section and the locations of drill holes reported in this news release, please view images attached.
Sampling Procedures, Quality Control and Quality Assurance
The technical information in this news release has been prepared in accordance with Canadian regulatory requirements set out
in National Instrument 43-101 ("NI43-101") and reviewed and approved by Stephen P. Quin, P. Geo., President and CEO of Midas Gold
Corp., and a Qualified Person. The exploration activities at the Stibnite Gold Project were carried out under the supervision of
Richard Moses, C.P.G., Qualified Person and Field Operations Manager for the Stibnite Gold Project. All gold assays are by a 30g
Fire Assay charge followed by an atomic absorption finish (with a 0.005g/t lower reporting limit). Samples reporting values >
6g/t gold are re-analyzed using a 30g Fire Assay charge followed by a gravimetric finish. Silver is analyzed via a 4-acid
digestion followed by an ICP finish (with a 0.5g/t lower reporting limit). Samples reporting values > 10g/t silver are
reanalyzed using a 50g Fire Assay charge followed by a gravimetric finish. Antimony is analyzed via a 4-Acid digestion with ICP
finish with a 5g/t lower reporting limit. Samples reporting values >500g/t antimony are reanalyzed using XRF fusion. Some
intervals may not add or subtract correctly due to rounding, but differences are deemed insignificant. Analyses are carried out
by ALS Chemex in their Reno and Elko, Nevada and Vancouver, British Columbia laboratories. Umpire samples are routinely submitted
to third party labs and blank and standard samples are inserted at appropriate intervals and used for quality assurance and
quality control and a review of the results of analyses of the blanks, standards and duplicates by the Company's Qualified Person
indicates values are within normal and acceptable ranges.
About Midas Gold and the Stibnite Gold Project
Midas Gold Corp., through its wholly owned subsidiaries are focused on the exploration and, if warranted, site restoration and
development of gold-antimony-silver deposits in the Stibnite-Yellow Pine district of central Idaho that are encompassed by its
Stibnite Gold Project.
Forward-Looking Information
Statements contained in this news release that are not historical facts are "forward-looking information" or
"forward-looking statements" (collectively, "Forward-Looking Information") within the meaning of applicable Canadian securities
legislation and the United States Private Securities Litigation Reform Act of 1995. Forward Looking Information includes, but is
not limited to, disclosure regarding possible events, conditions or financial performance that is based on assumptions about
future economic conditions and courses of action including actions taken with the goal of improving, expanding and de-risking
previously defined mineral resources; the timing and availability of further drill results; potential sites for additional
drilling that could result in potential improved confidence, enhanced economic returns and/or extending higher grade areas. In
certain cases, Forward-Looking Information can be identified by the use of words and phrases such as "plans", "expects" or "does
not expect", "is expected", "estimates", "forecasts", "intends", "anticipates", "potential", "confirm" or "does not anticipate",
"believes", "contemplates", "recommends" or variations of such words and phrases or statements that certain actions, events or
results "may", "could", "would", "might" "be achieved". In preparing the Forward-Looking Information in this news release, the
Corporation has applied several material assumptions, including, but not limited to, that pending drill results will be available
in a timely manner without undue delay; that areas identified as potential sites for additional drilling will yield results
consistent with management's expectations based on the PFS; any additional financing needed will be available on reasonable
terms; the exchange rates for the U.S. and Canadian currencies will be consistent with the Corporation's expectations; that the
current objectives concerning the Stibnite Gold Project can be achieved and that its other corporate activities will proceed as
expected; that the current price and demand for gold will be sustained or will improve; that general business and economic
conditions will not change in a materially adverse manner and that all necessary governmental approvals for the planned
activities on the Stibnite Gold Project will be obtained in a timely manner and on acceptable terms; the continuity of the price
of gold and other metals, economic and political conditions and operations. Forward-Looking Information involves known and
unknown risks, uncertainties and other factors which may cause the actual results, performance, or achievements of the
Corporation to be materially different from any future results, performance or achievements expressed or implied by the
Forward-Looking Information. Such risks and other factors include, among others, the industry-wide risks and project-specific
risks identified in the PFS and summarized above; risks related to the availability of financing on commercially reasonable
terms; operations and contractual obligations; changes in exploration programs based upon results of exploration, including drill
results; changes in estimated mineral reserves or mineral resources; future prices of metals; availability of third party
contractors; availability of equipment; failure of equipment to operate as anticipated; accidents, effects of weather and other
natural phenomena and other risks associated with the mineral exploration industry; environmental risks, including environmental
matters under US federal and Idaho rules and regulations; impact of environmental remediation requirements and the terms of
existing and potential consent decrees on the Corporation's planned exploration and development activities on the Stibnite Gold
Project; certainty of mineral title; community relations; delays in obtaining governmental approvals or financing; fluctuations
in mineral prices; the Corporation's dependence on one mineral project; the nature of mineral exploration and mining and the
uncertain commercial viability of certain mineral deposits; the Corporation's lack of operating revenues; governmental
regulations and the ability to obtain necessary licenses and permits; risks related to mineral properties being subject to prior
unregistered agreements, transfers or claims and other defects in title; currency fluctuations; changes in environmental laws and
regulations and changes in the application of standards pursuant to existing laws and regulations which may increase costs of
doing business and restrict operations; risks related to dependence on key personnel; and estimates used in financial statements
proving to be incorrect; as well as those factors discussed in the Corporation's public disclosure record. Although the
Corporation has attempted to identify important factors that could affect the Corporation and may cause actual actions, events or
results to differ materially from those described in Forward-Looking Information, there may be other factors that cause actions,
events or results not to be as anticipated, estimated or intended. There can be no assurance that Forward-Looking Information
will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements.
Accordingly, readers should not place undue reliance on Forward-Looking Information. Except as required by law, the Corporation
does not assume any obligation to release publicly any revisions to Forward-Looking Information contained in this news release to
reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.
Summary Drill Assay Results - Yellow Pine Deposit, Stibnite Gold Project |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hole-ID |
|
Hole
Type |
|
Collar
Azimuth |
|
Collar
Dip |
|
TD
(m) |
|
From
(m) |
|
To
(m) |
|
Width
(m)(1) |
|
Au
(g/t)(2) |
|
Ag
(g/t) |
|
Sb
(%) |
|
AuEq
(g/t)(3) |
MGI-16-415 |
|
Core |
|
155 |
|
-35 |
|
170.7 |
|
62.5 |
|
105.2 |
|
42.7 |
|
3.12 |
|
10.7 |
|
0.49 |
|
4.25 |
|
including |
|
|
|
|
|
|
|
|
|
64.0 |
|
71.6 |
|
7.6 |
|
2.83 |
|
24.8 |
|
1.00 |
|
5.16 |
|
including |
|
|
|
|
|
|
|
|
|
97.5 |
|
105.2 |
|
7.6 |
|
3.53 |
|
23.7 |
|
1.44 |
|
6.70 |
|
and |
|
|
|
|
|
|
|
|
|
108.2 |
|
114.3 |
|
6.1 |
|
0.99 |
|
68.7 |
|
3.49 |
|
8.85 |
MGI-16-416 |
|
Core |
|
170 |
|
-30 |
|
149.4 |
|
No significant intercepts |
MGI-16-417 |
|
Core |
|
128 |
|
-45 |
|
189.3 |
|
0 |
|
122.5 |
|
122.5 |
|
2.21 |
|
8.0 |
|
0.46 |
|
3.22 |
|
including |
|
|
|
|
|
|
|
|
|
3.6 |
|
32.6 |
|
29.0 |
|
2.28 |
|
26.5 |
|
1.53 |
|
5.66 |
(1) The reported drill hole intercept widths are oblique to the mineralized
structure. True width is approximately 75-85% of intercept width. |
(2) Gold composites are generated using a 0.5 g/t Au cutoff grade.
Antimony composites are generated using a 0.1% Sb cutoff grade. Composites may include intervals below cutoff
grades. |
(3) Gold equivalent grades are reported for illustrative purposes only
and are calculated using metal prices of $1200/oz Au, $17/oz Ag and $7600/tonne Sb and do not include recovery,
transportation, refining or payability. These factors will vary for each metal and affect the economic importance of
the various metals. |
Image Available: http://www.marketwire.com/library/MwGo/2017/1/23/11G128046/Images/MidasGoldFig1-e3392e8d2d7d8d3d98dc8fbcaccf0264.jpg
Image Available: http://www.marketwire.com/library/MwGo/2017/1/23/11G128046/Images/MidasGoldFig2-e3b5f2c478e7b3059b572c32fa901dea.jpg