Twin Disc, Inc. Announces Fiscal 2018 First Quarter Financial Results

• First Quarter Sales Increase 25.8% to $45,064,000
• Gross Profit Percent Improves 520 Basis Points to 30.8% in First Quarter
• Six-Month Backlog at September 29, 2017 was $62,665,000, Up 89.4% from September 30, 2016 on Improving Oil and Gas, and Aftermarket Demand

RACINE, Wis., Oct. 27, 2017 (GLOBE NEWSWIRE) -- Twin Disc, Inc. (NASDAQ:TWIN), today reported financial results for the fiscal 2018 first quarter ended September 29, 2017. 

Sales for the fiscal 2018 first quarter were $45,064,000, compared to $35,835,000 for the same period last year.  The 25.8% increase in fiscal 2018 first quarter sales was primarily due to improved demand for the Company’s 8500 series transmission systems from North American pressure pumping customers, and higher sales of aftermarket components.  Global demand for the Company’s industrial products remained flat in the quarter.  While positive signs have been seen in European and North American marine markets and the global patrol craft market, the Asian commercial marine market remains depressed.

“Positive momentum from new and existing North American pressure pumping customers accelerated in the fiscal 2018 first quarter, helping drive significant year-over-year improvements in sales, profitability, and backlog,” commented John H. Batten, President and Chief Executive Officer. “We expect favorable trends within our oil and gas market to continue throughout this fiscal year as producers adjust to stable oil and gas prices, and North American servicing companies invest in rebuilding and expanding their pressure pumping fleets.  Throughout the recent oil and gas downturn, our strategy was focused on emerging as a stronger, more profitable, and better positioned company.  We proactively adjusted our cost structure, while investing in our power control technologies and our global support and service platform.  These initiatives are beginning to pay off by enhancing profitability and expanding our market share.  As the year progresses, we will remain committed to programs that increase operating efficiency by further reducing costs, investing in new production capabilities, and improving the effectiveness of our supply chain.” 

Gross margin for the fiscal 2018 first quarter was 30.8%, compared to 25.6% for the same period last year. The 520 basis point increase in gross profit percent for the fiscal 2018 first quarter was primarily due to higher volumes, a more profitable mix of revenues, improved operating efficiencies and a global reduction in fixed manufacturing costs. 

For the fiscal 2018 first quarter, marketing, engineering and administrative (ME&A) expenses increased $1,193,000 to $13,668,000, compared to $12,475,000 for the fiscal 2017 first quarter.  The 9.6% increase in ME&A expenses in the quarter was primarily due to increased global bonus expense, stock compensation expense and additional salary expense to support volume growth.  As a percent of revenues, ME&A expenses fell to 30.3% for the fiscal 2018 first quarter, compared to 34.8% for the same period last year. 

Twin Disc recorded restructuring charges of $1,218,000 in the fiscal 2018 first quarter, compared to restructuring charges of $258,000 in the same period last fiscal year. Restructuring activities during the fiscal 2018 first quarter related primarily to cost reduction and productivity actions at the Company’s European operations.

The fiscal 2018 first quarter tax benefit was primarily the result of the reversal of the valuation allowance ($3.8 million) in a certain foreign jurisdiction that had been subject to a full valuation allowance.  Improvement in operating results, along with a business reorganization which provided favorable tax planning opportunities, allowed for the reversal of this valuation allowance during the fiscal 2018 first quarter.  Excluding the reversal of the valuation allowance, the Company’s effective tax rate was 68.2%.  This is higher than the prior year first quarter effective tax rate of 39.6%, adjusting for non-deductible losses in the prior year.  The increase from the prior year is primarily due to the reversal of a reserve for uncertain tax positions ($145,000) brought upon by the successful conclusion of an Internal Revenue Service audit.  

Net income attributable to Twin Disc for the fiscal 2018 first quarter was $3,392,000, or $0.29 per diluted share, compared to a net loss attributable to Twin Disc of ($2,696,000), or ($0.24) per share, for the fiscal 2017 first quarter.

Earnings (loss) before interest, taxes, depreciation and amortization (EBITDA)* were $442,000 for the fiscal 2018 first quarter, compared to ($1,779,000) for the fiscal 2017 first quarter, despite a $960,000 increase in restructuring expense. 

Jeffrey S. Knutson, Vice President – Finance, Chief Financial Officer, Treasurer and Secretary, stated: “Our balance sheet remains strong and provides us with significant flexibility to make targeted investments in our business and strengthen our organization. At September 29, 2017, inventories were up only 4.3% from the same period a year ago, despite the significant increases in sales and backlog, and we remain focused on implementing strategies to reduce our working capital requirements.  At September 29, 2017, the Company had $15,461,000 in cash and $8,244,000 of borrowings drawn under its $40,000,000 revolving credit facility.  Twin Disc invested $1,467,000 in capital expenditures during the fiscal 2018 first quarter, and expects to invest approximately $7,000,000 to $9,000,000 in total fiscal 2018 capital expenditures, which reflects plans to invest in technologically advanced equipment, global sourcing programs, and new products.”

Mr. Batten concluded: “Our six-month backlog at September 29, 2017 was $62,665,000, compared to $46,437,000 at June 30, 2017 and $33,082,000 at September 30, 2016.  The 89.4% year-over-year improvement in our six-month backlog is primarily due to improving trends within our North American oil and gas markets, and stable industrial demand, offset by continued weakness from offshore oil and gas marine customers in Southeast Asia and the U.S.  Other marine markets are showing signs of stabilizing demand, specifically for commercial applications in Europe and the U.S., and within the global patrol boat market.  While we are optimistic trends in several of our markets are improving, we remain focused on strategies underway that diversify Twin Disc’s markets, reduce our cost structure and working capital requirements, and improve manufacturing efficiencies.  I want to thank all of Twin Disc’s global employees for their hard work and commitment to our customers through an extremely difficult and prolonged downturn in many of our end markets.  I am proud of how our team responded, and I am encouraged by the direction we are headed.” 

Twin Disc will be hosting a conference call to discuss these results and to answer questions at 11:00 a.m. Eastern Time on Friday, October 27, 2017. To participate in the conference call, please dial 800-500-0311 five to ten minutes before the call is scheduled to begin. A replay will be available from 2:00 p.m. October 27, 2017 until midnight November 3, 2017. The number to hear the teleconference replay is 844-512-2921. The access code for the replay is 1328677. 

The conference call will also be broadcast live over the Internet. To listen to the call via the Internet, access Twin Disc's website at http://ir.twindisc.com/index.cfm and follow the instructions at the web cast link. The archived webcast will be available shortly after the call on the Company's website.

About Twin Disc, Inc.
Twin Disc, Inc. designs, manufactures and sells marine and heavy-duty off-highway power transmission equipment.  Products offered include: marine transmissions, surface drives, propellers and boat management systems, as well as power-shift transmissions, hydraulic torque converters, power take-offs, industrial clutches and control systems.  The Company sells its products to customers primarily in the pleasure craft, commercial and military marine markets, as well as in the energy and natural resources, government and industrial markets.  The Company’s worldwide sales to both domestic and foreign customers are transacted through a direct sales force and a distributor network. 

Forward-Looking Statements
This press release may contain statements that are forward looking as defined by the Securities and Exchange Commission in its rules, regulations and releases. The Company intends that such forward-looking statements be subject to the safe harbors created thereby. All forward-looking statements are based on current expectations regarding important risk factors including those identified in the Company’s most recent periodic report and other filings with the Securities and Exchange Commission. Accordingly, actual results may differ materially from those expressed in the forward-looking statements, and the making of such statements should not be regarded as a representation by the Company or any other person that the results expressed therein will be achieved.

*Non-GAAP Financial Disclosures
Financial information excluding the impact of asset impairments, restructuring charges, foreign currency exchange rate changes and the impact of acquisitions, if any, in this press release are not measures that are defined in U.S. Generally Accepted Accounting Principles (“GAAP”). These items are measures that management believes are important to adjust for in order to have a meaningful comparison to prior and future periods and to provide a basis for future projections and for estimating our earnings growth prospects. Non-GAAP measures are used by management as a performance measure to judge profitability of our business absent the impact of foreign currency exchange rate changes and acquisitions. Management analyzes the company’s business performance and trends excluding these amounts.  These measures, as well as EBITDA, provide a more consistent view of performance than the closest GAAP equivalent for management and investors. Management compensates for this by using these measures in combination with the GAAP measures. The presentation of the non-GAAP measures in this press release are made alongside the most directly comparable GAAP measures.

Definition – Earnings Before Interest, Taxes, Depreciation and Amortization (EBITDA)
The sum of, net earnings and adding back provision for income taxes, interest expense, depreciation and amortization expenses: this is a financial measure of the profit generated excluding the above mentioned items.

Contact: Jeffrey S. Knutson (262) 638-4242