TSX-V: VEIN | FSE: N071
TORONTO, June 27, 2018 /CNW/ - Enforcer Gold Corp ("Enforcer"
or the "Company") (TSX-V: VEIN) (FSE: N071) is pleased to present a compilation of historical and 2018 drilling results that
highlight the gold-copper mineralization potential of the North zone at the Roger Project. The Roger Project is advantageously
located 5 km north of Chibougamau, Quebec, has all-season road access and is crossed by a power
line that serviced the past-producing Troilus Mine. Enforcer is earning a 50% interest in the project from project operator,
SOQUEM.
As reported in the Company's June 20, 2018 press release, 2018 hole 1206-18-94 returned continuous
lower-grade mineralization encompassing both the North and Main zones over an impressive 514.5 m of
core length to a vertical depth of ~400 m. A copper-enriched gold zone correlating with the North zone was intercepted from
79.5-129.5 m down hole, returning 54 m of 0.18 g/t Au and 0.11% Cu
(Table 1).
President and CEO, Steve Roebuck, comments:
"The North zone appears to form an entirely different system of mineralization from the Main zone of the Mop-II deposit. It
has a different style of mineralization whereby both copper and gold are present in highly anomalous quantities over wide
intervals. The added copper component at the North zone makes it an important exploration target and further work is planned to
better understand the geology and define its potential."
The North zone is currently poorly understood, given there is no surface exposure and only 8 drill holes have tested the zone.
Of those, only 4 holes drilled by SOQUEM (2008-2018) systematically assayed for copper and gold. Of the two 1986 holes reported
in Table 1, 86-MOP2-02 only reported sporadic assays while 86-MOP2-03 reported numerous copper assays but on discontinuous
intervals. The other two historical holes had only been assayed for gold and are not reported in Table 1.
A drill hole location plan is available in the Roger Map Gallery .
Table 1. Mop-II Deposit North Zone – Select Historic & Current Assay Results
Hole ID
|
From
(m)
|
To
(m)
|
Length
(m)
|
Cu
(%)
|
Au
(g/t)
|
Cu Eq
(%)
|
Au Eq
(g/t)
|
Note
|
1986 Holes
|
|
|
|
|
|
|
|
|
86-MOP2-02
|
82.30
|
83.30
|
1.00
|
0.53
|
1.13
|
1.21
|
2.02
|
|
86-MOP2-03
|
66.00
|
75.20
|
9.20
|
0.13
|
0.20
|
0.25
|
0.42
|
Partial
|
|
93.58
|
115.90
|
22.32
|
0.12
|
0.48
|
0.41
|
0.68
|
Partial
|
|
128.00
|
136.20
|
8.20
|
0.22
|
0.29
|
0.39
|
0.66
|
Partial
|
|
172.80
|
208.85
|
36.05
|
0.09
|
0.28
|
0.26
|
0.43
|
Partial
|
2008 Holes
|
|
|
|
|
|
|
|
|
1206-08-26
|
92.50
|
163.90
|
71.40
|
0.22
|
0.22
|
0.35
|
0.59
|
|
|
194.00
|
217.80
|
23.80
|
0.11
|
0.08
|
0.16
|
0.26
|
|
|
352.45
|
398.00
|
45.55
|
0.11
|
0.58
|
0.46
|
0.76
|
|
1206-08-27
|
146.00
|
190.00
|
44.00
|
0.12
|
0.20
|
0.24
|
0.40
|
|
|
205.00
|
240.00
|
35.00
|
0.08
|
0.18
|
0.19
|
0.31
|
|
|
295.50
|
330.00
|
34.50
|
0.16
|
0.18
|
0.27
|
0.45
|
|
2011 Hole
|
|
|
|
|
|
|
|
|
1206-11-52
|
51.10
|
66.95
|
15.85
|
0.13
|
0.18
|
0.24
|
0.40
|
|
|
92.50
|
117.00
|
24.50
|
0.11
|
0.09
|
0.16
|
0.27
|
|
|
307.75
|
357.00
|
49.25
|
0.14
|
0.13
|
0.22
|
0.36
|
|
2018 Hole
|
|
|
|
|
|
|
|
|
1206-18-94
|
75.0
|
129.5
|
54.5
|
0.16
|
0.18
|
0.27
|
0.45
|
|
Notes to Table 1:
All holes presented in Table 1 were completed by diamond (core) drilling. Widths represent down hole core
lengths; true widths are unknown at this time. The 1986 holes were drilled by Flanagan Inc. and the 2008-2011 holes by
SOQUEM. Sampling of hole 86-MOP2-03 was discontinuous, hence there are numerous intervals where no samples were taken; a
value of zero, "0" was assigned to these intervals to calculate a weighted average for the entire interval. Copper and
gold equivalents were calculated using a US$1,270/oz gold price and US $3.10/lb copper price.
|
QAQC
The 2018 Phase 1 drilling program was managed by project operator, SOQUEM, utilizing standard industry procedures and
protocols and following a formal quality assurance and quality control ("QAQC") program. Sample preparation and analysis were
performed by ALS Minerals in Val-d'Or, Quebec, a CAN-P-1579, CAN-P-4E (ISO/IEC 17025:2005)
accredited testing laboratory. Gold grades are determined using a standard fire assay with atomic absorption finish on a 30g
pulverized fraction. Samples grading above 2 g/t are re-assayed using fire assay with gravimetric finish on a 30g fraction on
both the pulps and rejects. Copper was assayed by ICP-AES following a four-acid digestion. Pulps and rejects from the
samples grading above 10,000ppm are re-assayed by ICP or AAS following a four-acid digestion. SOQUEM routinely inserts blanks,
duplicates and standards in the sample sequence as part of its internal QAQC program.
About SOQUEM
SOQUEM Inc., a subsidiary of Ressources Québec, is a leading player in mineral exploration with its mission to explore,
discover and develop mining properties in Quebec. SOQUEM has participated in more than 350
exploration projects and contributed to major discoveries of gold, diamonds, lithium and other mineral commodities in
Quebec.
About Enforcer Gold Corp
Enforcer Gold Corp is a Canadian-based mineral exploration company and is earning a 100% interest in the Montalembert gold
project from Globex Mining Enterprises Inc. (TSX: GMX) and a 50% interest in the advanced-stage Roger porphyry gold-copper
project from SOQUEM. Both properties are located in Quebec's prolific Abitibi greenstone belt
and have excellent road access and nearby infrastructure and amenities.
Enforcer's VP Exploration, Antoine Fournier, PGeo, is a Qualified Person as defined by National
Instrument 43-101 and has reviewed and approved the content of this news release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.
This news release contains "forward-looking statements" that are based on expectations, estimates, projections and
interpretations as at the date of this news release. Forward-looking statements are frequently characterized by words such as
"plan", "expect", "project", "intend", "believe", "anticipate", "estimate", "suggest", "indicate" and other similar words or
statements that certain events or conditions "may" or "will" occur, and include, without limitation, statements regarding the
Company's plans with respect to the exploration of its Roger project, the exploration potential and analogous deposit potential
of the Roger project and the timing of the Company's exploration programs. Such forward-looking statements involve known and
unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to
be materially different from any future results, performance or achievements expressed or implied by such forward-looking
statements. Such risks and other factors may include, but are not limited to, the results of exploration activities; the ability
of the Company to complete further exploration activities; the ability of the Company to complete transactions on terms
announced; timing and availability of external financing on acceptable terms and those risk factors outlined in the Company's
Management Discussion and Analysis as filed on SEDAR. Enforcer Gold does not undertake to update any forward-looking information
except in accordance with applicable securities laws.
SOURCE Enforcer Gold
View original content: http://www.newswire.ca/en/releases/archive/June2018/27/c8995.html