(TheNewswire)
Vancouver, British Columbia, Canada / TheNewswire / July 23, 2018 – Global Li-Ion Graphite Corp. (“ Global Li-Ion ” or, the
“ Company ”) (CSE: LION) reports findings following completion of drilling and sample analysis
of drill cuttings samples and diamond drill core samples taken at the Chedic Graphite project and receipt of the final program
report.
About the Chedic Graphite Project
The Chedic Property is in the Voltaire mining district west of Carson City, NV. The claims generally are on a
ridge along the crest of the Carson Range.
Previous Work
Graphite horizons are non-resistant and outcrop poorly. Four selected samples taken during the technical report
field examination analyzed 3.69 to 29.00% total carbon. Graphite is an excellent conductor and typically will give a good
geophysical response. A CSAMT/MT survey showed a strong response over a +1300 meter (+4,000 feet) length coincident with the
limited scattered exposures of graphite. The first four reverse circulation holes cut graphitic intervals ranging from 10 feet of
6.08% carbon to 30’ of 4.82% carbon.
Drill Program Results
The first four drill holes; CD-1, CD-2, CD-4 and CD-5; were completed using a reverse circulation drill (RC). The drilling
was suspended before the fifth hole (CD-3) commenced, due to adverse weather and subsequent wet ground conditions. That hole, CD-3,
was later completed using a diamond drill to test core recovery compared to wet RC sampling. All sampling was personally done or
overseen by William Feyerabend, QP, who transported or shipped the samples to American Assay Laboratory, Sparks, NV for total
carbon analyses using an ELTRA carbon sulfur analyzer.
The conclusion from the results of all five holes are that:
More graphite is lost and therefore not recovered in the sampling using the diamond drill core method than the
recirculation recovery of rock chip samples. The diamond drill core samples show that the host rock is intensely fractured and
faulted. The graphite mineralization occurs in multiple sedimentary horizons within a basaltic andesite volcanic event. The
sediments which host the graphite are comprised of fine sands, silts and clays.
Additional findings were announced in a previous release linked here:
https://globalli-iongraphite.com/news-releases/global-li-ion-graphite-finishes-first-four-drill-holes-at-the-chedic-graphite-project-nevada/
Any future drilling focused on establishing grade is recommended to be undertaken using reverse circulation
drilling. The sample recovery for hole 3 averaged approximately 48%. Graphite is a soft mineral that is easily eroded and it is
interpreted that this is the reason for the consistently lower assay results between the two drilling methods.
President & CEO John Roozendaal states: “Management is reviewing the findings and will announce its plans for
the project when its review is completed. The results of the drill program are positive in demonstrating there appears
to be good correlation between the geophysical anomaly and graphite mineralization, over the 500 m strike length of the anomaly
that was drill tested in this program. The drilling also shows that sample recovery is low when using a diamond drill system and
therefore any future drilling will use an RC drill, where establishing grade is the priority. The diamond drill core showed that
the mineralization is in sedimentary layers within a volcanic host rock and drill core samples also show that the rock is intensely
fractured and so gives us a better understanding of the host rock and some of its physical properties for future
planning.”
Results from the drill holes is reported in the tables below.
Click Image To View Full Size
Drill #
|
WGS 84 ZONE 11
|
AZIMUTH
|
INCLIN
|
TD
|
EAST
|
NORTH
|
CH - 1
|
257980
|
4335475
|
200
|
-46
|
220
|
CH - 2
|
257716
|
4335572
|
187
|
-46
|
210
|
CH - 3
|
257905
|
4335502
|
193
|
-50
|
171
|
CH - 4
|
257979
|
4333422
|
249
|
-44
|
420
|
CH - 5
|
257434
|
4335454
|
298
|
-45
|
200
|
|
|
|
|
|
|
|
|
|
|
COMPARISON OF HIGHER GRADE INTERVALS: CORE VS. REVERSE CIRCULATION
|
|
TYPE
|
DRILL HOLE
|
INTERVAL
|
C%
|
TYPE
|
DRILL HOLE
|
INTERVAL
|
C%
|
|
Core
|
CD3
|
113'-113'9"
|
1.808
|
RC
|
CH4
|
80'-90'
|
4.898
|
|
Core
|
CD3
|
145''9"-146'4"
|
1.056
|
RC
|
CH4
|
130'-140'
|
3.658
|
|
Core
|
CD3
|
147'5"-148'
|
1.363
|
RC
|
CH4
|
150'-160'
|
4.568
|
|
Core
|
CD3
|
148'-148'9"
|
1.280
|
RC
|
CH4
|
160'-170'
|
5.580
|
|
Core
|
CD3
|
158'-159'1"
|
1.521
|
RC
|
CH4
|
170'-180'
|
4.333
|
|
|
|
|
|
RC
|
CH2
|
150'-160'
|
3.116
|
|
|
|
|
|
RC
|
CH2
|
160'-170'
|
2.456
|
|
|
|
|
|
RC
|
CH2
|
170'-180'
|
3.489
|
|
|
|
|
|
RC
|
CH5
|
10'-20'
|
6.081
|
|
|
|
|
|
|
|
|
|
This news release has been reviewed and approved by William Feyerabend CPG., who is the Company’s qualified
person as defined by National Instrument 43-101.
About Global Li-Ion
Global Li-Ion Graphite is an exploration and Development Company focused on the acquisition and development of
Graphite projects with an intent to supply the rapidly growing energy storage industry. Each Li-Ion Battery requires Graphite,
Lithium, Cobalt and nickel. Global Li-Ion Graphite is actively evaluating additional projects for acquisition to build a world
class Graphite supply Company.
Further information about Global Li-Ion is available under its profile on the SEDAR website, www.sedar.com , on the CSE website, www.thecse.com , and the Company’s website, www.globalli-iongraphite.com .
For Further information about the Company, please contact:
Jason Walsh
Director & Officer
Global Li-Ion Graphite Corp.
Telephone 604.608.6314
Email: info@liongraphite.com
Neither the Canadian Securities Exchange nor its regulation services provider have reviewed or
accept responsibility for the adequacy or accuracy of this press release.
Forward-Looking Information:
This press release contains forward-looking statements. The use of any of the words “anticipate”, “continue”,
“estimate”, “expect”, “may”, “will”, “project”, “should”, “believe” and similar expressions are intended to identify
forward-looking statements. Although the Company believes that the expectations and assumptions on which the forward-looking
statements are based are reasonable, undue reliance should not be placed on the forward-looking statements because the
Company can give no assurance that they will prove to be correct. Since forward-looking statements address future events and
conditions, by their very nature they involve inherent risks and uncertainties. These statements speak only as of the date of this
press release. Actual results could differ materially from those currently anticipated due to a number of factors and risks
discussed in the Company's Management's Discussion and Analysis under the Company's profile on www.sedar.com. While the Company may
elect to, it does not undertake to update this information at any particular time.
NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES OR FOR DISSEMINATION
IN THE UNITED STATES.
Copyright (c) 2018 TheNewswire - All rights reserved.