Alexco Updates Bermingham Mineral Resource

VANCOUVER, Sept. 20, 2018 /CNW/ - Alexco Resource Corp. (NYSE American: AXU) (TSX:AXR) ("Alexco" or the "Company") today reports an updated and expanded mineral resource estimate for the Bermingham deposit, located within the Keno Hill Silver District ("KHSD") in Canada's Yukon Territory.

Summary

As a result of exploration work conducted in 2017 and 2018, the Bermingham indicated mineral resources have expanded from 17.3 million ("M") ounces to 33.3 M ounces of contained silver at an average silver grade of 628 grams per tonne ("g/t"), while inferred mineral resources have increased from 5.5 M ounces to 10.4 M ounces of contained silver at an average silver grade of 526 g/t. The updated mineral resource estimate was prepared by SRK Consulting (Canada) Inc. ("SRK") and a comparison to the prior mineral resource estimate is outlined below:

With the addition to the silver mineral resource at Bermingham, Alexco's district-wide indicated mineral resources at Keno Hill increased by approximately 24% from 67.9 M ounces to 84.0 M ounces of contained silver. Similarly, district-wide inferred mineral resources increased by 28% to 23.0 M ounces of contained silver.

Background

The Bermingham deposit comprises a closely spaced series of subparallel steeply southeast dipping vein sets – identified (hangingwall to footwall) as the Bermingham, Bermingham Footwall and Bear veins that can be traced over a northeasterly strike distance exceeding 850 meters ("m") in four zones identified (from southwest to northeast) as the Etta, Arctic, Bear and Northeast Zones that are separated by post-mineral faults. In addition, a small resource is contained in a conjugate set of related West Dipping veins. Recent detailed underground and surface drilling work has focused on the Arctic and Bear Zones where the vein sets are connected either laterally or vertically within the wider Bermingham vein-fault structural corridor. Mineralization extends from between 90 m to 160 m below surface to a depth of approximately 450 m where veining remains open.

A detailed mineral resource estimate by vein and zone was prepared by SRK and is summarized below:

Alexco Chairman and Chief Executive Officer Clynt Nauman said, "The majority of the tonnage in the Bermingham deposit resides in the Arctic and Bear Zones where approximately 28 million of the 33 million indicated ounces of silver are located at an average grade of approximately 700 g/t silver. Looked at in total, the Bermingham deposit is now emerging as a one of the larger discoveries in the Keno Hill district, characterized by more than 1.6 million tonnes of indicated mineralization with an average silver grade approximately 25% higher than our Flame & Moth deposit. This new resource will be taken into consideration during the pre-feasibility mine planning work scheduled for completion in October, 2018. Both the completed resource update and the pre-feasibility study represent the next steps in moving the Keno Hill District back toward production."

Bermingham Deposit

Alexco has conducted surface diamond drilling programs at Bermingham between 2009 and 2018 and underground drilling from the exploration decline in 2018. The database at Bermingham currently includes 203 drill holes for a total of 62,541 m of HQ core. The resource estimation presented here incorporates the results from 405 vein intervals from 151 holes compared with those from 93 holes that were used in the January 2017 estimation.

Recent drilling has focused on obtaining reduced resource definition intercept spacings, particularly on the upper part of the high grade Bear vein that overall ranges in true width up to 6.4 m at 182 ounce per tonne ("oz/t") silver (K-14-0537) and in grade up to 240 oz/t silver over 5.0 m true width (K-15-0580). This mineralization has been traced over a down-plunge extent of 300 m (over a vertical range of 230 m) with a plunge width of up to approximately 130 m, and the top of the deposit in this vicinity being approximately 130 m below surface. In addition, the recent drilling has increased coverage of the Bermingham and Bermingham Footwall veins where a significant amount of the new resource has been defined.

Interpretation of the consolidated drilling results has confirmed the presence of the three mineralized veins that splay and change orientation along strike within the north-northeast striking and moderately to steeply southeast dipping Bermingham vein-fault structural corridor. This structural corridor is primarily divided into the Etta Zone that lies in the hangingwall of the post-mineral Mastiff Fault exposed at the western end of the historic Bermingham open pit and the extended Artic Zone in its footwall below the open pit. The main through-going Bermingham and Bermingham Footwall veins occur in both the Etta and the extended Arctic zones, while the Bear vein and associated West Dipper vein set occur only within the extended Arctic Zone at positions controlled by a flexure in the Bermingham vein-fault.

The Bermingham deposit veins typically occur in structurally complex zones as discrete veins 0.5 m to more than 5 m wide with a five to ten meter wide structurally damaged vein margin. The discrete veins exhibit heavily-disseminated to massive mineralization while mineralization in the vein margins is commonly more stringer-like. The higher grade Bermingham mineralization is generally characterized by the presence of a complex silver bearing mineral assemblage including pyrargyrite (ruby silver), freibergite, argentiferous galena, stephanite, polybasite and wire silver in a dominantly sideritic gangue.

Metallurgical test work has demonstrated that silver and lead recoveries from Bermingham are expected to be in the range of 94% to 96%, while producing a lead concentrate grading 55% to 60% lead and up to 30,000 g/t silver. Zinc recovery is predicted to be in the range of 70% to 75% to a zinc concentrate grading in excess of 50% zinc.

The Bermingham mineral resource was estimated using 3-D Maptek Vulcan block modeling software in multiple passes in nine by three by six meter blocks by ordinary kriging. Grade estimates were based on capped one meter composited assay data. Capping levels were set to 4,200 g/t for silver for the Bermingham vein, 13,000 g/t for the Bear vein, 3,500 g/t for the Bermingham Footwall vein and 3,600 g/t for the West Dipper vein; lead was capped at 6.0% for the Bermingham vein, 33.0% for the Bear vein, 13.0% for the Bermingham Footwall vein and 7.5 for the West Dipper vein; and zinc was capped at 6.5% for the Bermingham vein, 12.0% for the Bear vein, 8.5% for the Bermingham Footwall vein and 5.0% for the West Dipper vein. Blocks were classified as indicated mineral resources provided the blocks were estimated within the first pass search ellipse using multiple drill holes and a minimum of 5 composites. All other interpolated blocks were classified as inferred mineral resources.

A summary of all of Alexco's KHSD mineral resources incorporating the updated mineral resource estimates for Bermingham are appended to this release, and are available for review on the Company's website at www.alexcoresource.com.

Qualified Persons

SRK prepared the updated mineral resource estimate for the Bermingham deposit, and is independent of Alexco for purposes of National Instrument 43-101 ? Standards of Disclosure for Mineral Projects ("NI 43-101"). The Bermingham mineral resource estimate was completed by Cliff Revering, P.Eng., Principal Consultant (Geological Engineering) with SRK. Mr. Revering is a Qualified Persons as defined by NI 43-101 and has reviewed, verified and approved the contents of this news release relating to the mineral resource estimate for the Bermingham deposit. All mineral resources are classified following the CIM Definition Standards for Mineral Resources and Mineral Reserves (May 2014), in accordance with the CIM Estimation of Mineral Resources and Mineral Reserves Best Practice Guidelines and with NI 43-101 guidelines.

The metallurgical testing information in this news release has been reviewed and verified by Jeffrey B. Austin P. Eng., President of International Metallurgical and Environmental Inc. and a Qualified Person as defined by NI 43-101.

The disclosure of all other scientific and technical information in this news release regarding projects on Alexco's mineral properties has been reviewed and approved by Alan McOnie, FAusIMM, Alexco's Vice President, Exploration and a Qualified Person as defined by NI 43-101.

The  drill data and sampling protocols have been reviewed, verified and compiled by Alexco's geologic staff since 2011 under the supervision of Alan McOnie, Vice President, Exploration for Alexco and a Qualified Person as defined by National Instrument 43-101. A rigorous quality control and quality assurance protocol is used on the project, including blank, duplicate and standard reference samples in each batch of 20 samples delivered to the assay lab. Drill core samples included in the updated resource estimation were direct shipped to ALS Minerals Labs at Whitehorse, Yukon Territory for preparation, with fire assay, multi-element ICP analyses and ore grade over limits completed at the ALS Minerals facility in North Vancouver, British Columbia.

About Alexco

Alexco owns the majority of the historic high-grade Keno Hill Silver District in Canada's Yukon Territory as detailed in its preliminary economic assessment (the "PEA") entitled "Preliminary Economic Assessment of the Keno Hill Silver District Project, Yukon, Canada", which is dated March 29, 2017, with an effective date of January 3, 2017, and anticipates the sequential development of four high grade silver deposits over an eight year mine life producing more than one million tonnes with an average grade of 843 grams per tonne silver, 3.3% lead and 4.6% zinc. Silver production is anticipated to be approximately 3.5 million ounces per year. The PEA is preliminary in nature and includes inferred mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the PEA will be realized. Mineral resources that are not mineral reserves do not have demonstrated economic viability.

Alexco also operates a wholly-owned subsidiary business, Alexco Environmental Group, that provides mine-related environmental services, remediation technologies and reclamation and mine closure services to both government and industry clients in North America and elsewhere.

Please visit the Alexco website at www.alexcoresource.com

Some statements ("forward-looking statements") in this news release contain forward-looking information concerning Alexco's anticipated results and developments in Alexco's operations in future periods, planned exploration and development of its properties, plans related to its business and other matters that may occur in the future, made as of the date of this news release. Forward looking statements may include, but are not limited to, statements with respect to the future remediation and reclamation activities, future mineral exploration, the estimation of mineral reserves and mineral resources, the realization of mineral reserve and mineral resource estimates, the preparation and anticipated timing for completion of a pre-feasibility study,  future mine construction and development activities, future mine operation and production, the timing of activities and reports, the amount of estimated revenues and expenses, the success of exploration activities, permitting time lines, requirements for additional capital and sources and uses of funds. Forward-looking statements are subject to a variety of known and unknown risks, uncertainties and other factors which could cause actual events or results to differ from those expressed or implied by the forward-looking statements. Such factors include, among others, risks related to actual results and timing of exploration and development activities; actual results and timing of mining activities; actual results and timing of environmental services activities; actual results and timing of remediation and reclamation activities; conclusions of economic evaluations; changes in project parameters as plans continue to be refined; future prices of silver, gold, lead, zinc and other commodities; possible variations in mineable resources, grade or recovery rates; failure of plant, equipment or processes to operate as anticipated; accidents, labour disputes and other risks of the mining industry; First Nation rights and title; continued capitalization and commercial viability; global economic conditions; competition; and delays in obtaining governmental approvals or financing or in the completion of development activities. Forward-looking statements are based on certain assumptions that management believes are reasonable at the time they are made. In making the forward-looking statements included in this news release, Alexco has applied several material assumptions, including, but not limited to, the assumption that Alexco will be able to raise additional capital as necessary, that the proposed exploration and development and timing for completion of a pre-feasibility study will proceed as planned, and that market fundamentals will result in sustained silver, gold, lead and zinc demand and prices. There can be no assurance that forward-looking statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Alexco expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as otherwise required by applicable securities legislation.

APPENDIX I - Summary of Mineral Resources

Summary of Resources

The following table sets forth the estimated mineral resources for Alexco's mineral properties within the Keno Hill Silver District:

View original content:http://www.prnewswire.com/news-releases/alexco-updates-bermingham-mineral-resource-300715902.html

SOURCE Alexco Resource Corp.

View original content: http://www.newswire.ca/en/releases/archive/September2018/20/c7800.html