Continuous strong results warrant an additional 8,300 metres of drilling
MONTREAL, Oct. 4, 2018 /CNW/ - MONARQUES GOLD
CORPORATION ("Monarques" or the "Corporation") (TSXV: MQR) (OTCMKTS: MRQRF) (FRANKFURT: MR7) is pleased to report
additional assay results from the 2018 diamond drilling program at its wholly owned Croinor Gold project 50 kilometres east of
Val-d'Or, Québec. The initial 20,000-metre program started in March
2018 and focused on the expansion and infilling of the Croinor Gold deposit. The program was completed in early September
with a total of 19,935 metres of core drilled in 89 holes. Drilling continued with one rig on the property and a second drill was
added on September 17 to drill an additional 8,300 metres before the winter freeze.
The Phase 3 results are from a total of 6,790 metres of drilling in 36 holes (see longitudinal view). Assays have been received for 77 of the 89 holes drilled and logged (see table below and press
releases dated July 10, 2018 and September 5, 2018).
The first 25 holes in the table below are from the two areas targeted for bulk sampling, on the 125-foot level and the
250-foot level of the old mine workings. These holes are infill and contour drill holes for the two zones, with a grid spacing of
10 metres by 10 metres, considering historical holes and holes drilled previously by Monarques. Hole CR-18-636 returned 43.25 g/t
Au over 2.1 metres, including 88.60 g/t Au over 1.0 metre in the 125-foot level bulk sample area, and Hole CR-18-647 returned
25.92 g/t Au over 3.4 metres in the 250-foot level bulk sample area. Both these holes have increased the volume of ore planned to
be mined. New wireframes for each area are being completed by an external consultant.
Near-mine exploration drilling has consistently returned positive results, with 8 of the 11 holes returning economic assays.
Hole CR-18-653, drilled 41 metres up plunge from the nearest planned stope, returned 22.00 g/t Au over 1.1 metres, indicating
that the gold system is still open to the west. Hole CR-18-649 is a down dip hole drilled into the host diorite to test the
deposit at depth and returned 9.59 g/t Au over 1.0 metre, indicating that the deposit is still open at depth.
"We continue to be impressed by these high-grade results on Croinor Gold, which prompted us to drill an additional 8,300
metres," said Jean-Marc Lacoste, President and Chief Executive Officer of Monarques. "The success
of our 2018 drilling program also shows that we have a better understanding of the deposit. This supplementary 8,300-metre
drilling program is designed to pass between the planned stopes, where there are no drill results, to increase the tonnage in the
Croinor Gold deposit before mining starts, and to drill around the periphery of the deposit to follow up on positive assay
results to extend the resource to the west, where it is still open. As I have said before, we believe that the Croinor Gold
discovery potential remains essentially untapped."
Phase 3 drill results from the Croinor Gold project
Hole
|
Length
|
From
|
To
|
Width*
|
Grade
|
Area
|
Number
|
(m)
|
(m)
|
(m)
|
(m)
|
(g/t Au)
|
Targeted**
|
CR-18-623
|
46
|
42.8
|
43.3
|
0.5
|
0.06
|
125
|
CR-18-624
|
219
|
64.6
|
66.0
|
1.4
|
2.87
|
250
|
CR-18-625
|
130
|
94.2
|
95.1
|
0.9
|
0.68
|
125
|
CR-18-626
|
40
|
21.8
|
22.9
|
1.1
|
0.42
|
125
|
CR-18-627
|
136
|
93.7
|
94.9
|
1.2
|
5.86
|
125
|
CR-18-628
|
85
|
77.5
|
78.4
|
0.9
|
0.74
|
250
|
CR-18-629
|
121
|
25.0
|
26.0
|
1.0
|
2.26
|
125
|
CR-18-630
|
91
|
71.1
|
72.3
|
1.2
|
6.38
|
250
|
CR-18-631
|
187
|
66.5
|
67.2
|
0.7
|
7.11
|
250
|
|
|
72.7
|
74.7
|
2.0
|
5.91
|
|
CR-18-632
|
151
|
26.8
|
27.8
|
1.0
|
4.27
|
125
|
CR-18-633
|
103
|
77.0
|
78.0
|
1.0
|
23.20
|
250
|
CR-18-634
|
193
|
131.8
|
132.2
|
0.5
|
2.13
|
125
|
CR-18-635
|
226
|
76.5
|
77.5
|
1.0
|
1.80
|
250
|
CR-18-636
|
46
|
34.0
|
36.1
|
2.1
|
43.25
|
125
|
Including
|
|
34.0
|
35.0
|
1.0
|
88.60
|
|
CR-18-637
|
163
|
24.9
|
28.2
|
3.3
|
5.42
|
125
|
Including
|
|
27.0
|
28.2
|
1.2
|
11.20
|
|
CR-18-638
|
154
|
104.0
|
109.0
|
5.0
|
11.20
|
125
|
Including
|
|
104.0
|
105.1
|
1.1
|
21.60
|
|
Including
|
|
108.1
|
109.0
|
0.9
|
35.20
|
|
CR-18-639
|
85
|
69.2
|
70.2
|
1.0
|
8.69
|
250
|
|
|
75.2
|
77.3
|
2.1
|
4.83
|
|
Including
|
|
75.2
|
76.2
|
1.0
|
7.48
|
|
CR-18-640
|
85
|
72.7
|
76.0
|
3.3
|
4.40
|
250
|
CR-18-641
|
172
|
103.0
|
104.3
|
1.3
|
7.35
|
125
|
CR-18-642
|
40
|
32.8
|
34.0
|
1.2
|
0.21
|
250
|
CR-18-643
|
70
|
30.2
|
31.4
|
1.2
|
0.64
|
250
|
CR-18-644
|
76
|
60.6
|
61.8
|
1.2
|
5.39
|
250
|
CR-18-645
|
222
|
68.0
|
70.0
|
2.0
|
4.55
|
250
|
CR-18-646
|
82
|
53.5
|
54.8
|
1.3
|
1.34
|
250
|
CR-18-647
|
199
|
61.5
|
64.9
|
3.4
|
25.92
|
250
|
CR-18-648***
|
760
|
155.9
|
159.7
|
3.8
|
4.62
|
NME
|
CR-18-649***
|
751
|
528.2
|
531.5
|
3.3
|
3.96
|
NME
|
Including
|
|
529.4
|
530.4
|
1.0
|
9.59
|
|
CR-18-650
|
250
|
126.1
|
127.0
|
0.9
|
17.35
|
NME
|
|
|
199.0
|
201
|
2.0
|
7.41
|
|
CR-18-651
|
241
|
189.3
|
193.2
|
3.9
|
4.39
|
NME
|
Including
|
|
190.3
|
191.3
|
1.0
|
8.23
|
|
|
|
200.3
|
203.4
|
3.1
|
9.86
|
|
Including
|
|
202.2
|
203.4
|
1.2
|
21.10
|
|
CR-18-652
|
271
|
182.1
|
183.3
|
1.2
|
12.20
|
NME
|
|
|
198.6
|
199.6
|
1.0
|
5.67
|
|
CR-18-653
|
262
|
193.1
|
194.2
|
1.1
|
22.00
|
NME
|
|
|
204.4
|
205.3
|
0.9
|
4.45
|
|
CR-18-654
|
202
|
112.0
|
114.4
|
2.4
|
1.19
|
NME
|
CR-18-655
|
250
|
170.3
|
171.1
|
0.8
|
3.13
|
NME
|
CR-18-656
|
202
|
140.7
|
141.8
|
1.1
|
5.23
|
NME
|
|
|
177.2
|
181.6
|
4.4
|
7.45
|
|
Including
|
|
177.2
|
178.3
|
1.1
|
17.70
|
|
CR-18-657
|
220
|
130.8
|
132.5
|
1.7
|
7.93
|
NME
|
CR-18-658
|
259
|
116.3
|
117.2
|
0.9
|
1.20
|
NME
|
* The width shown is the core length. True width is estimated to be 90-95%
of the core length.
|
** 125=125 Foot Level Bulk Sample; 250=250 Foot Level Bulk Sample; NME=Near
Mine Exploration.
|
*** Holes CR-18-648 and CR-18-649 were drilled down dip, parallel to the
diorite, to test for the presence of multiple directions of quartz veining. The width shown is the core length. True
width is estimated to be 30-35% of the core length.
|
Sampling normally consists of sawing the core into two equal halves along its main axis and shipping one of the halves to the
ALS Minerals laboratory in Val-d'Or for assaying. The samples are crushed, pulverized and
assayed by fire assay with atomic absorption finish. Results exceeding 3.0 g/t are re-assayed using the gravity method, and
samples containing gold grains are assayed using the metallic sieve method. Monarques uses a comprehensive QA/QC protocol,
including the insertion of standards, blanks and duplicates.
The technical and scientific content of this press release has been reviewed and approved by Ronald G.
Leber, P.Geo., the Corporation's qualified person under National Instrument 43-101.
ABOUT MONARQUES GOLD CORPORATION
Monarques Gold Corporation (TSXV: MQR) is an emerging gold mining company focused on pursuing growth through its large
portfolio of high-quality projects in the Abitibi mining camp in Quebec, Canada. The Corporation
currently owns close to 300 km² of gold properties (see map), including
the Wasamac deposit (measured and indicated resource of 2.6 million ounces of gold), the Beaufor Mine, the Croinor Gold (see
video), McKenzie Break
and Swanson advanced projects and the Camflo and Beacon mills, as well as five promising
exploration projects. It also offers custom milling services out of its 1,600 tonne-per-day Camflo mill.
Forward-Looking Statements
The forward-looking statements in this press release involve known and unknown risks, uncertainties and other factors that may
cause Monarques' actual results, performance and achievements to be materially different from the results, performance or
achievements expressed or implied therein. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is
defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this press
release.
View original content to download multimedia:http://www.prnewswire.com/news-releases/monarques-gold-intersects-43-25-gt-au-over-2-1-metres-and-25-92-gt-au-over-3-4-metres-on-its-croinor-gold-project-300724264.html
SOURCE Monarques Gold Corporation
View original content to download multimedia: http://www.newswire.ca/en/releases/archive/October2018/04/c5261.html