(TheNewswire)
Estes Park, Colorado / TheNewswire / January 3,
2019 – Taranis Resources Inc. (“Taranis”) [TSX.V: TRO] updates activity related to its 100%-owned Thor project. This News
Release summarizes the 2018 drilling exploration activity completed in an area between the Broadview and Great Northern Mines and
reports on recent geological modeling of the deposit that have modeled the geology and metal zonation of the deposit (see www.taranisresources.com for some of the results).
Exploration Drilling at the South End of the Thor Deposit
2018 drilling (28 drill holes, including one lost hole) was completed in an area of Broadview Creek where topographic
erosion has deeply dissected the Thor deposit and exposed the underlying “roots” of the main Thor deposit. The initial drill
results for the summer of 2018 were reported August 20, 2018 and included drill holes Thor-182, Thor-184 and Thor-185 that
encountered typical high-grade silver, gold and base metal mineralization at Thor. Analytical data now includes indium which was
found to occur in zinc-rich portions of the main Thor deposit.
Two Different Mineralized Geological Domains at Thor
In the early 1900’s and 1930’s underground exploration was completed at Thor in the Broadview main adit (233 m adit)
and the Morgan Tunnel (634 m adit) topographically below the known Broadview, Great Northern and True Fissure deposits. These adits
were used to explore the deposit at depth and to provide a haulage drift for extracting ore from the overlying high-grade deposits.
Both adits are currently inaccessible but limited historical data available indicates that both tunnels intersected a tabular
tectonic zone dipping moderately to the northeast (~500) that hosts low-grade mineralization in contrast to the overlying
high-grade Thor deposit. The 2018 drilling has documented this transition from the overlying higher-grade mineralization into the
underlying lower-grade material in the area between the Broadview and Great Northern Mines, and the ore types are designated Type 1
and Type 2 respectively.
Type 1 - Main Thor Deposit, including Gold Pit
The higher-grade portion of the Thor deposit occurs within and above a prominent “keel” or synclinal fold structure
that is largely confined to primary bedding along a contact between the underlying Sharon Creek Formation and the overlying
Broadview Formation. The deposit is parallel to fold plunges and a pronounced lineation. Arguably the most important discovery of
the 2018 exploration is that all the higher-grade material occurs up-dip of a feature known as the BT intrusive that is a
Carboniferous-age volcanic pile/intrusive complex and has major geometric controls on the Thor deposit.
|
Hole
|
From (m)
|
To (m)
|
Length (m)
|
Silver (g/t)
|
Gold (g/t)
|
Cd
(ppm)
|
Cu (%)
|
Pb (%)
|
Zn (%)
|
Indium (ppm)
|
|
Thor-182
|
15.94
|
18.32
|
2.38
|
149.1
|
0.24
|
117.9
|
0.08
|
2.32
|
3.40
|
0.67
|
|
Thor-184
|
64.32
|
65.08
|
0.76
|
211.0
|
0.21
|
3.3
|
0.09
|
0.01
|
0.02
|
0.02
|
|
Thor-185
|
9.69
|
12.50
|
2.81
|
61.6
|
0.12
|
117.1
|
0.23
|
2.28
|
3.77
|
0.61
|
|
Thor-186
|
43.65
|
44.72
|
1.07
|
40.7
|
0.25
|
371.3
|
0.08
|
0.86
|
6.05
|
0.44
|
|
Thor-197
|
51.11
|
52.12
|
1.01
|
216.0
|
0.25
|
195.7
|
0.84
|
2.60
|
3.69
|
1.05
|
Four short holes were completed around the Gold Pit zone that attempted to trace high-grade gold and silver
mineralization found in channel sampling at surface. Two very short holes (Thor-204 (32m) & Thor-205 (14m) failed to intersect the
zone, but two of the deeper holes were successful in extending the zone and are related to a fold structure found at surface
plunging steeply to the southeast.
|
Hole
|
From (m)
|
To (m)
|
Length (m)
|
Silver (g/t)
|
Gold (g/t)
|
Cd
(ppm)
|
Cu (%)
|
Pb (%)
|
Zn (%)
|
Indium (ppm)
|
|
Thor-184
|
12.04
|
14.45
|
2.41
|
4.9
|
3.81
|
4.9
|
0.01
|
0.03
|
0.10
|
0.13
|
|
Thor-203
|
6.46
|
11.58
|
5.12
|
270.9
|
0.36
|
61.2
|
0.18
|
0.66
|
0.20
|
0.38
|
Type 2 - Underlying Zone
The remaining drill holes intersected a variety of mineralization that occurs in the keel portion of the deposit.
Although much lower-grade in contrast to the main Thor deposit, this area includes extensive low-grade gold mineralization that has
never been explored in detail at Thor. Additional information pertaining to the drilling can be found on the Taranis
website.
|
Hole
|
From (m)
|
To (m)
|
Length (m)
|
Silver (g/t)
|
Gold (g/t)
|
Cd
(ppm)
|
Cu (%)
|
Pb (%)
|
Zn (%)
|
Indium (ppm)
|
|
Thor-188
|
62.09
|
65.54
|
3.45
|
61.8
|
0.16
|
15.2
|
0.49
|
0.25
|
0.19
|
0.13
|
|
Thor-191
|
72.24
|
74.22
|
1.98
|
35.5
|
0.06
|
58.1
|
0.24
|
1.17
|
1.11
|
trace
|
|
Thor-193
|
35.27
|
42.18
|
6.91
|
6.0
|
0.27
|
14.3
|
trace
|
0.14
|
0.20
|
trace
|
|
Thor-194
|
60.56
|
79.86
|
19.30
|
2.0
|
0.21
|
2.9
|
trace
|
trace
|
trace
|
trace
|
|
Thor-209
|
59.74
|
68.88
|
9.14
|
0.4
|
0.36
|
13.4
|
trace
|
trace
|
0.16
|
0.12
|
Volcanic Dome Hosted Mineralization
Recent 3D modeling has shown the presence of at least at least two large volcanic domes at Thor, all of which are
spatially related to known precious-base metal deposits. These features contain volcaniclastic-sedimentary rocks of the Jowett
Formation and include a distinctive rock referred to as “Green Tuff” and “Grey Porphyry” at Thor. Drill hole Thor-193 identified
mineralization directly within intrusive rock of diorite composition.
These largely unexposed volcanic domes have been named for their respective locations between the Broadview-True
Fissure Creeks (“BT”) and the True Fissure-Mt. Goat Creeks (“TG”), and form areas of positive topographic relief at Thor owing to
their resistant weathering. It is interesting to note that the TG volcanic dome is spatially related to the Blue Bell Deposit and
is a major exploration target at Thor (Ridge Target).
Qualified Person and Quality Control
Exploration activities at Thor were overseen by John Gardiner (P.
Geol.) who is a Qualified Person under the meaning of Canadian National Instrument 43-101. Samples are taken under the direction of
qualified geologists. Core is sawed onsite and one-half is retained for reference and further analytical work including specific
gravity determinations. Samples of the other half are delivered by Taranis via courier to MS Analytical Labs in Langley, British
Columbia. MS Analytical Labs is an ISO 9001:2008 certified analytical laboratory. Taranis inserts standards every 10th sample for
quality control in addition to the stringent internal checks completed at MS Analytical. Samples are dried, crushed, split and
pulverized. Analysis for silver, copper, lead, zinc and related trace elements was done by modified aqua regia digestion with ICP
finish, and gold by 30-gram fire assay with ICP finish.
About Taranis Resources Inc.
Taranis is an exploration company focused on the development of its 100%-owned Thor project in southeast British
Columbia. Its mandate is to recognize mineral deposits early in the exploration cycle that can be developed through intelligent
exploration and business alliances. For additional information on Taranis or its Thor project, please visit our website at
www.taranisresources.com.
TARANIS RESOURCES INC.
Per: John J. Gardiner (P. Geol.),
President and CEO
For further information contact:
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN
THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS NEWS
RELEASE.
This News Release may contain forward looking statements based on assumptions and judgments of
management regarding future events or results that may prove to be inaccurate as a result of factors beyond its control, and actual
results may differ materially from expected results.
Copyright (c) 2019 TheNewswire - All rights reserved.