HOUSTON, Jan. 31, 2019 (GLOBE NEWSWIRE) -- DynaEnergetics, a business of DMC Global Inc. (Nasdaq: BOOM), today announced it
achieved a 100% success rate on field trials of its new DS Trinity™ perforating system. DS Trinity, which features three charges on
a single plane, is a member of the DynaStage™ family of Factory-Assembled, Performance-Assured™ perforating systems. The
field trials were conducted in 6-inch casing using a 4-inch OD (outer diameter) DS Trinity system.
The patent-pending DS Trinity was designed to deliver a cost-effective, length-optimized solution that provides operators with
greater flexibility in designing their oil and gas well completions. At 8-inches in length, DS Trinity is up to 3.5 times
shorter than conventional perforating guns, enabling much higher gun counts per stage. The reduced length was achieved by
aligning the charges on a plane, versus the traditional spiral placement of charges down the length of a gun. The system also
eliminates the sub adaptor typically used to connect adjacent guns in a string. The optimized length enables customers to run
more guns per stage or reduce the required height of rig-up cranes and pressure control equipment.
“Our field trials were conducted in partnership with a large U.S.-based operator that provided important input on the key
features and functionality of the system,” said Ian Grieves, DynaEnergetics’ president. “The DS Trinity solution leverages the
performance, features and safety of our commercially successful DynaStage system. Moreover, the 100% success rate achieved in
the trials illustrates that both systems deliver equivalent reliability levels.”
Customers can choose from a selection of DynaEnergetics’ uniform entry-hole shaped charges, ensuring optimal fracture
stimulation. Depending on charge selection, a single DS Trinity system enables perforating performance equivalent to
traditional four- or five-shot guns. Like DynaStage, DS Trinity is intrinsically safe, factory assembled and performance
assured, providing industry-leading operating efficiency and accelerating the speed at which wells are brought onto
production.
DynaEnergetics intends to commercialize the 4-inch OD version of DS Trinity in the second quarter. A 3 ½-inch OD version
designed for use in 5 ½-inch casing is scheduled for release shortly thereafter.
Field Trial Summary
In one of the recent field trials, the customer successfully shot 32 stages in 6-inch casing. The customer utilized 25 4-inch
DS Trinity systems per stage and perforated in 10-foot increments. The trial was completed with charges that provided the
caliber equivalent of a four-shot gun.
The 4-inch guns were used in lieu of typical 3 1/8-inch guns to minimize the gap between the gun body and casing. This
created more consistent perforations and improved overall fracture stimulation. The system also enabled accelerated pump down
operations and reduced water usage.
Based on the success of the trials, the operator said it plans to complete additional jobs in the coming months using the 4-inch
DS Trinity system.
About DynaEnergetics
DynaEnergetics’ innovative perforating systems make a measurable impact on well productivity, completion cost and safety. As the
only global perforating manufacturer that designs, manufactures and qualifies all of its equipment and accessories in-house,
DynaEnergetics ensures unmatched performance and the lowest total cost of operations. For more information, visit
www.dynaenergetics.com.
Safe Harbor Language
Except for the historical information contained herein, this news release contains forward-looking statements within the meaning of
Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended,
including DynaEnergetics’ intent to commercialize a 4-inch OD version of DS Trinity in the second quarter, and a 3 ½-inch OD
version shortly thereafter. Such statements and information are based on assumptions regarding DynaEnergetics’ ability to achieve
its commercialization goals. Forward-looking information and statements are subject to known and unknown risks, uncertainties
and other important factors that may cause actual results and performance to be materially different from those expressed or
implied by such forward-looking information and statements, including but not limited to: the success of DynaEnergetics’ product
and technology development initiatives; competitive factors; current or future limits on manufacturing capacity; general economic
conditions impacting our business and the business of our customers; as well as the other risks detailed from time to time in our
SEC reports, including the annual report on Form 10-K for the year ended December 31, 2017. We do not undertake any
obligation to release publicly revisions to any forward-looking statement, including, without limitation, to reflect events or
circumstances after the date of this news release, or to reflect the occurrence of unanticipated events, except as may be required
under applicable securities laws.
Contact:
Wendy Gray
DynaEnergetics Marketing Strategist
832.776.7683
wendy@graymattermktg.com
Investor Contact:
Geoff High
Vice President of Investor Relations
DMC Global Inc.
303.514.0656
ghigh@dmcglobal.com