Baselode Releases More Uranium Assay Results from ACKIO

• 0.69% U3O8 over 1.5 m within 0.17% U3O8 over 14.2 m at 166.9 m drill hole depth in AK23-92 (Pod 5)

• 0.53% U3O8 over 0.5 m within 0.11% U3O8 over 8.5 m at 192.5 m drill hole depth in AK23-92 (Pod 4):

• Assays from 20 remaining drill holes on 2023's program, including those with the highest radioactivity results, are pending

• Uranium mineralization, alteration, and structure all remain open at depth with no signs of fading

Toronto, Ontario--(Newsfile Corp. - October 30, 2023) - Baselode Energy Corp. (TSXV: FIND) (OTCQB: BSENF) ("Baselode" or the "Company") is pleased to announce additional uranium ("U3O8") assays from 5 drill holes of the 7,512 metre diamond drilling program (the "Program") completed within the ACKIO uranium prospect ("ACKIO") on the Hook project ("Hook" or the "Project"). Assays from the remaining 20 drill holes cover shallow mineralization in Pods 1 and 7, and exploration drillholes outside of the known ACKIO footprint.

"Uranium mineralization, alteration, and structure all remain open at depth with no signs of fading. Our previous news release (September 20, 2023, AK23-88: 0.32% U3O8 over 16.5 m at 184.0 m) highlighted new mineralization in Pod 4 discovered at depth that remains open, providing a high-priority drill target to follow up in 2024. Encouragingly, the results from AK23-92 suggest Pods 4 and 7 occur on the same east-dipping structure, extending from the overburden contact approximately 30 m beneath the surface and remaining open below 200 m. We are currently assessing if there is sufficient continuity of mineralization to link the two pods. Baselode is fully funded for an aggressive 2024 exploration program following the completion of our recent $10.7 M financing," said James Sykes, CEO, President and Director of Baselode.

ACKIO Drill Program Details
36 drill holes for 7,512 metres ("m") were completed during the Program. ACKIO consisted of 30 drill holes for 6,193 m, Mirror consisted of 5 drill holes for 1,145 m, and 1 drill hole for 174 m was completed on a regional exploration target.

Drill holes AK23-92 and AK23-94 confirmed mineralization is open at the edges of Pods 4 and 5. Mineralization was intersected between 150 m and 190 m true vertical depth, growing some of the deeper mineralized Pods at ACKIO. Highlight results from AK23-92 indicate multiple uranium intersections from Pod 4 could connect with Pod 7, creating a continuous zone of mineralization that would extend from the overburden contact at approximately 40 m beneath the surface down 200 m beneath the surface and still open at depth.

Drill holes AK23-100 and AK23-101 were drilled within the edge and centre of Pod 2, respectively. Mineralization was intersected between 100 m and 140 m true vertical depth. Mineralization in AK23-100 confirmed the northern edge of Pod 2 is still open, and AK23-101 confirmed previously modelled mineralization within the centre of Pod 2 for the purpose of future resource estimation.

Geochemical U3O8 assay results from drill holes AK23-92 to AK23-94 and AK23-100 to AK23-101 were provided by Saskatchewan Research Council's Geoanalytical Laboratory ("SRC") in Saskatoon, Saskatchewan. The assay methodology includes SRCs "U3O8 Wt% Assay" analysis package where an aliquot of sample pulp is digested in a concentration of HCL:HNO3. The digested volume is then made up with deionized water for analysis by ICP-OES. Uranium assay results from the remaining twenty drill holes will be released after being compiled, thoroughly quality checked, and interpreted by the technical team.

ACKIO is 30 km southeast of well-established infrastructure, including an all-season road and powerline between Cameco Corp.'s (TSX: CCO) and Orano's McArthur River mine and Key Lake uranium mill joint ventures. ACKIO is 70 km northeast of the Key Lake mill. The Program was helicopter-supported to lessen any ground-induced environmental impacts within the project area.

NOTES:

1. All reported drill hole lengths do not represent true thicknesses which have yet to be determined.

About Baselode Energy Corp.
Baselode controls 100% of approximately 264,172 hectares for exploration in the Athabasca Basin area, northern Saskatchewan, Canada. The land package is free of any option agreements or underlying royalties.

The Company discovered the ACKIO near-surface, uranium prospect in September 2021. ACKIO measures greater than 375 m along strike, greater than 150 m wide, comprised of at least 9 separate uranium Pods, with mineralization starting as shallow as 28 m and 32 m beneath the surface in Pods 1 and 7, respectively, and down to approximately 300 m depth beneath the surface with the bulk of mineralization occurring in the upper 120 m. ACKIO remains open at depth, and to the north, south and east.

Baselode's Athabasca 2.0 exploration thesis focuses on discovering near-surface, basement-hosted, high-grade uranium orebodies outside the Athabasca Basin. The exploration thesis is further complemented by the Company's preferred use of innovative and well-understood geophysical methods to map deep structural controls to identify shallow targets for diamond drilling.

QP Statement
The technical information contained in this news release has been reviewed and approved by Cameron MacKay, P.Geo., Vice-President, Exploration & Development for Baselode Energy Corp., who is considered to be a Qualified Person as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects."

For further information, please contact:

Baselode Energy Corp.
FIND on the TSXV
info@baselode.com
www.baselode.com

James Sykes, CEO, President and Director
jsykes@oregroup.ca
306-221-8717

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the TSX Venture Exchange policies) accepts responsibility for the adequacy or accuracy of this release.

Certain information in this press release may contain forward-looking statements. This information is based on current expectations that are subject to significant risks and uncertainties that are difficult to predict. Actual results might differ materially from results suggested in any forward-looking statements. Baselode Energy Corp. assumes no obligation to update the forward-looking statements, or to update the reasons why actual results could differ from those reflected in the forward looking-statements unless and until required by securities laws applicable to Baselode Energy Corp. Additional information identifying risks and uncertainties is contained in the Company's filings with Canadian securities regulators, which filings are available under Baselode Energy Corp. profile at www.sedarplus.ca.

This news release does not constitute an offer to sell or a solicitation of an offer to buy any of the securities in the United States. The securities have not been and will not be registered under the United States Securities Act of 1933, as amended (the "U.S. Securities Act") or any state securities laws and may not be offered or sold within the United States or to, or for the account or benefit of, U.S. Persons unless registered under the U.S. Securities Act and applicable state securities laws, unless an exemption from such registration is available.

FIGURE 1 - Surface projections of modeled ACKIO uranium mineralization, drill hole collar locations and traces for AK23-81 to AK23-91

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/6412/185580_a5de50a3b4fd2a27_005full.jpg

TABLE 1 – Drill collar details, continuous composite elevated radioactivity results, and uranium assay results (U3O8) from drill holes AK23-92 to AK23-94, AK23-100 to AK23-101

NOTES: East and North units are metres using NAD83 datum, UTM Zone 13N
Elevation is recorded as "metres above sea level"
Az. = Azimuth, EOH = End of hole (measured in metres)
Composite radioactivity results use 300 cps cut-off and do not contain greater than 2.0 m consecutive dilution
Composite U3O8 results use 0.05% U3O8 cut-off and do not contain greater than 2.0 m consecutive dilution (i.e., dilution is <0.05% U3O8)
"includes/and includes" are composite U3O8 results using 0.50% U3O8 cut-off and do not contain greater than 2.0 m consecutive dilution (i.e., dilution is <0.50% U3O8)
*insuficient material remaining for geochemical preparation and assay analysis following QEMSCAN study

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/185580