QC Copper and Gold Inc QCCUF

news out

[juspam1]

QC Copper Reports Several Wide High-Grade Copper and Gold Intersections   

Toronto, ON – September 19, 2022 – QC Copper and Gold Inc. ("QC Copper" or the "Company") (QCCU:TSXV | QCCUF:OTCQB) is pleased to report 23 holes that continue to demonstrate wide zones of high-grade copper and gold within Opemiska's conceptual open pit. These new assay results are in the Starter Pit and Saddle Zone area on the Opemiska Copper-Gold Property.  
 
Highlights from the Starter Pit Area Include:
 

OPM-22-201	0.44% Cu and 0.11 gpt Au over 58.5m (from 261m to 319.5m)
OPM-22-203	0.48% Cu and 0.17 gpt Au over 78m (from 127.5m to 205.5m)
OPM-22-217	0.63% Cu and 0.13 gpt Au over 12m (from 120m to 132m)
And	0.62% Cu and 0.23 gpt Au over 54.0m (from 234m to 238m)
OPM-22-218	0.82% Cu and 0.19 gpt Au over 18m (from 61.5m to 79.5m)
OPM-22-220	1.52% Cu and 0.16 gpt Au over 19m (from 80m to 99m)
And	0.97% Cu and 0.26 gpt Au over 35m (from 121m to 156m)
OPM-22-223*	0.59% Cu and 0.18 gpt Au over 33m (from 27m to 60m)
OPM-22-226*	1.03% Cu and 0.50 gpt Au over 40m (from 1.0m to 41m)
OPM-22-227*	0.45% Cu and 0.35 gpt Au over 22.5m (from 45m to 67.5m)

 
 
Highlights from the Saddle Zone Results:

OPM-22-212	0.46% Cu and 0.07 gpt Au over 55.5m (from 147m to 202.5m)
And	0.78% Cu and 0.14 gpt Au over 22.5m (from 234m to 256.5m)

 
 

Click here to view cross sections and plan view of reported intersections.

 
 
Summary of reported composite intersections: Table 1

Hole ID	UTM Coordinates (East/North)	From (m)	To (m)	Interval (m)	Grade
					Copper (%)	Gold (gpt)	Silver (gpt)	Zinc (ppm)	Cobalt (ppm)
OPM-22-199	509919 / 5515250	160.5	169.5	9	0.248	0.155	2.08	429	52
OPM-22-200	510276 / 5515272	133.5	150	16.5	0.464	0.104	1.8	76	54
OPM-22-201	509930 / 5515356	261	319.5	58.5	0.44	0.114	2.19	76	26
OPM-22-202	510321 / 5515285	87	91.5	4.5	0.249	0.011	1.47	37	25
OPM-22-203	509835 / 5515276	127.5	205.5	78	0.488	0.179	2.66	91	36
		303	328.5	25.5	0.254	0.074	1.18	61	39
OPM-22-204	509850 / 5515132	42	52.5	10.5	0.196	0.069	1.27	60	36
		93	108	15	0.364	0.161	1.93	132	31
		186	211.5	25.5	0.206	0.094	0.84	85	31
		330	350	20	0.307	0.041	1.89	93	46
OPM-22-206	510294 / 5515327	121.5	132	10.5	0.491	0.111	2.39	115	62
		397.5	405	7.5	0.798	0.259	2.68	95	68
OPM-22-207	509708 / 5515069	3.5	18	14.5	0.4	0.265	2.07	50	44
OPM-22-210	510276 / 5515345	416.3	438	21.7	0.279	0.103	2.62	157	45
OPM-22-212	510345 / 5515344	147	202.5	55.5	0.459	0.07	2.62	89	55
		234	256.5	22.5	0.779	0.144	5.71	256	97
OPM-22-213	510353 / 5515387	156	166.5	10.5	0.405	0.029	2.26	495	62
OPM-22-215	509825 / 5515039	276	279.3	3.3	0.373	0.106	2.14	70	47
OPM-22-216	510337 / 5515403	273	277.5	4.5	0.57	0.138	3.8	134	57
OPM-22-217	509875 / 5515075	120	132	12	0.627	0.126	3.07	96	39
		165	180	15	0.628	0.165	2.92	166	48
		424.5	429	4.5	0.383	0.057	4.2	70	92
OPM-22-218	509800 / 5514965	2.2	21	18.8	0.204	0.169	2.67	174	22
		61.5	79.5	18	0.815	0.194	6.36	515	33
		114	118.5	4.5	0.848	0.259	9.53	158	56
		168	186	18	0.385	0.096	2.06	63	36
OPM-22-219	510298 / 5515403	36	42	6	0.324	0.028	2.5	112	68
		294	318	24	0.301	0.073	1.52	49	23
		334.5	339	4.5	0.318	0.207	1.9	68	75
OPM-22-220	509770 / 5514922	56	68	12	0.361	0.126	2.76	63	39
		80	99	19	1.523	0.161	8.04	466	54
		121	156	35	0.97	0.264	4.39	145	75
		265.5	269	3.5	0.722	0.283	3.11	74	45
OPM-22-222	509735 / 5514870	51	90	53	0.221	0.123	1.33	60	42
		156	175.5	19.5	0.349	0.459	1.14	47	21
OPM-22-223*	509704 / 5514853	27	60	33	0.585	0.18	3.99	122	52
		286.5	316.5	30	0.218	0.102	1.24	64	52
OPM-22-224	510203 / 5515466	61.5	69	7.5	0.285	0.073	2.86	105	137
OPM-22-225*	510288 / 5515450	117	124.5	7.5	0.308	0.065	1.48	61	34
OPM-22-226*	509670 / 5514821	1	41	40	1.029	0.498	4.46	93	48
OPM-22-227*	509670 / 5514821	45	67.5	22.5	0.446	0.351	1.91	80	50
		102	109.5	7.5	0.286	0.138	2.2	55	43
		159.4	168.7	9.3	0.203	0.067	0.67	66	35

*: Only Partial Results Available.
 
Details on the Starter Pit Results
Results presented for the Springer Mine area cover the Starter Pit area and include results from the Mill Zone, the Gap Area, and the area south of the Vein #3 as shown on the map and selected sections. Some of these intersections are exceptional, such as hole 220, which cut 2 zones over 76 m core length starting at 80m that assayed 1.5% copper and 0.16 gpt gold over 19m followed by 0.97% copper and 0.26 gpt gold over 35m. Hole 223 cut 33m of 0.59% copper and 0.18 gpt gold starting at 27m and hole 226 cut 40m of 1.03% copper and 0.5 gpt gold. Finally, nearby hole 227 intersected 22.5m of 0.45% copper and 0.35 gpt gold; these last three highlight the expected high gold grades near the Gwillim Fault, which forms the southern limit of the Opemiska Deposit.
 
Details on the Saddle Zone Results
Another exceptional intersection was encountered on the Saddle Zone, where a 110m of variably mineralized gabbro returned 0.46% copper and 0.07 gpt gold over 55.5m starting at 147m, followed by 0.78% copper and 0.14 gpt gold over 22.5m.
 
QP Statement
The technical information contained in this news release has been reviewed and approved by Charles Beaudry, P.Geo and go., Director and Vice President Exploration for QC Copper & Gold, a Qualified Person, as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects."  For the exploration undertaken by QC Copper & Gold, all assay batches are accompanied by rigorous Quality Assurance procedures, including the insertion of standards and blanks and verification assays in a secondary laboratory. All the core received from the drill is split in half, bagged and sent to ALS-Global facilities in Quevillon, Quebec for sample preparation and then the pulps are shipped to AlS-Global's Vancouver laboratory or some other location in the world for analysis using ALS-Global's standardized ISO-compliant methods, all of which are listed in the laboratory certificates provided with the assay results. The remaining half core along with the rejects and the pulps returned from the laboratory are securely stored at QC Copper's facilities in Chapais, Quebec. Quality Control results, including the laboratory's control samples, are evaluated immediately on reception of batch results and corrections are implemented immediately if necessary. All drill collars are surveyed and positioned in UTM coordinates. Collars are oriented using a gyroscopic north-finding system and downhole deviations surveys are done with a single-shot gyroscopic instrument at 30 to 50m intervals. For veins oriented approximately east-west and dipping towards the north, and drill holes oriented due south and plunging between 50 and 65 dips, the true width of mineralized intersections are equal or greater than 80% of the quoted core length composite intervals. This observation also holds for veins oriented northwest-southeast and dipping towards the northeast with holes drilled towards the southwest at 225 degrees with dips between 50 and 65 degrees. However, for other drill hole orientations relative to these veins or other less common vein orientations, the true widths of mineralized intersections are less.
 

For information and updates on QC Copper and Gold, please visit: www.qccopper.com 
 
And please follow us on Twitter @qccoppergold
 
To speak to the Company directly, please contact:
Stephen Stewart, Chief Executive Officer
Phone:  [phone]
Email:  [e-mail]   
 

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Certain information in this press release may contain forward-looking statements. This information is based on current expectations