Canada Nickel Company Inc V.CNC

No Evidence of this Being Viable

[GnuckyT]

0.3% nickel grade is NOT economic. With 50% recovery and smelter fee costs the only investors left are the paid shills or investors that don't know how to calculate costs while factoring the nickel grade. In this case its low.

[EndZonefor7]

I'm paid and now Ausenco is a liar ? See a shrink bud, you're losing it bigly.

[idlefreebird]

GnuckyT , since your a guru and have the math all figured out entertain us with your knowledge...give us a breakdown of your  calculations so us investors don't make a mistake...for the promotianal side it's a tax right of and has always been part of getting the name out, for any stock...but please fill us with your wisdom lol...you got the attention you wanted lol

[EndZonefor7]

BHP's Mt. Keith nickel mine is .5 % and much is .4 at Crawford. Gnucky is clearly not playing with a full deck.

[apapas1973]

If I recall endzone, .25 seems to be the line in the sand. I seem to remember Mark mentioning something. Any results above that especially in the .35-.40 or higher and it should be fine. But we can't be hitting .19 and .21 on the majority of the properties (which I don't expect). I know we've had some really low grades here and there sporadically. I think they have enough properties to

[Ivorygull]

Appapas, instead of trying to remember what it was, look at the link that idle first posted and then endzone reposted........it has 35%........knucklehead especially should look at it.

[Ivorygull]

https://www.youtube.com/watch?v=NnGm0FJpVno

[Ivorygull]

Sorry for the wrongname spelling ;)

[CanadianPatriot]

Let me introduce myself.  I originally was a shareholder having purchased the stock in July 2020.   Whether or not this company will benefit shareholders is dependent on whether these deposits can result in a profitable mine.  Been following these boards ever since but have not posted.  I'm part of an invite only discussion forum (please do not inbox me not solciting

[EndZonefor7]

Another pro FPX'er/Anti CNC'er. Not much trafffic over on that board in almost a month I see.  I prefer not beating the geology to death as much FUD can be tossed about determining exact mining processes etc by folks who are amateur geos. I'm not a geologist/mine builder and I would bet you aren't either.  Ausenco is one of the top engineering companies in the world

[PCGuy10]

This is exactly what I was referring to. Someone asked some serious questions about the viability of the deposit. This is much lower grade than anything in production and people are asking serious questions. All you do is attack him as a toll.  Before he became Pope Benedict, Cardinal Ratzinger was the Vatican Enforcer aka "God's Rottweiler". Enzone, you are the Resident

[EndZonefor7]

PCguy, why aren't you answering him ?  You ask questions over and over demanding answers like a broken record but never do any DD and come back and post them after all these months. You must be the hand picked coffee boy at the shorts troll farm always wanting spoonfed. 

[EndZonefor7]

PS Maybe your buddy should take his BS facts over to the CEO board where he's getting destroyed. 

[N3tPr0phet]

And when the questions actually get addressed it's only tangentially... EZ: FPX is out in the boonies, starting capex would be at least a billion dollars more than CNC. NS: How could that be when the difference in the startup capex figures between the two PEAs was less than a billion? EZ: FPX is like 100km from the power grid. That's a lot of powerline. NS: Sure, but the question was

[Ivorygull]

Good afternoon CanadianPatriot, could you be so kind as to tell us why you suddenly have the urge to ask all of these questions. Your questions pointed at endzone are also pointed at other long term investors, and I being one of them happen to have similar views as him/her. You say " I'm part of an invite only discussion forum comprised of knowledgeable individuals with a mining

[EndZonefor7]

Good reply Ivorygull.  I have seen many of these shysters come on here out of the blue claiming they are connected to some prestigous investing group or company with zero credibility. It's all bullsh*t. They always go after those posters most positive about the company and play word games with the wrong numbers in order to keep some trail of BS posts going. Don't fall for the cr@p

[N3tPr0phet]

Mensa is pleb-tier. The Triple Nine Society's membership fees are substantially lower, and the comraderie is much better without the roughshod 1.98% dragging the calibre of conversation down.

[Youbetyourask]

That's what I was wondering too Ivory. why would someone who is in an "invite only" to a "knowledgeable" group of mining investors taking time out of his/her day to set our poor unknowledgable of mining heads straight on how it is? This CNC discuboard really brings them out. They come peddling their wears and really don't want us to lose $ I guess. Thank you you guys

[GnuckyT]

So let me get this straight.  In recent days we experienced the following: Mark taking a world tour to convince South Africans and South Koreans to buy this stock. - insightful as it gives us a better understanding on how a company with no revenues spends a big chunk of its limited cash $1,000,000.00 approximately on "promotion" Mark renting a booth and speaking at a conference

[EndZonefor7]

Never seen so many ex-shareholders being so concerned about CNC share price and its the only stock they "used to" own/post on. Appears they are on CEO.ca now whining like Karens. If you are a passionate investor who likes to post you are branded as part of a paid promo team conspiracy. Such shallow lives.

[CravingProfits]

What seems to be what the naysayers are misguided on is the fact that they gambled their money on Crawfird hoping the s.p to gi parabolic. What is happening instead is Crawfird reached its' highs and profits were taken out. Happens all the time after the release of a PEA in mining ventures. Now the story is switching to a large low nickel large scale district deposit with many positive factors

[DrNo1962]

Maybe... OR... The fact that CNC could not deliver a "strategic partner who understood low grade mining" as CEO suggested for 6 months means no strategic who understands low grade mining thought it was economic? Possible. Share price performance agrees.

[CravingProfits]

Which big wig mining company would put up a billion dollars in Cnc right now 'Crawford'....only to find out Russia has fired a missile at another country, or Indonesia just discovered a new high grade deposit at a lower development and operating cost, or Hydrogen is the new fuel of the future , a solid state battery becomes mass produced in 2026 etc. These guys will start moving only once

[EndZonefor7]

DrNo has some man crush on Selby and can't let go. Keeps crying the deposit is no good etc but only posts here. Why keep posting DrNo ? Not one other investment in your portfolio?

[Ivorygull]

 'At least I got out with a profit.' Oh Gnuckyt your so darn lucky but I don't care I don't give a f$ck eh! and your inference that you got out with a profit, suggesting that we did not, is not quite accurate. You see CNC is still there, my shares are still there, and although I admit that I am down on my investment at this point in time, that is all it is, a point in time.&

[CravingProfits]

Genm board....another winner. Lol Cnc might be next at this rate. Btw...I do own genm also. But the bullboard is an irritation to me. Lo. Glta

[Shwayjao]

...(please do not inbox me not solciting members) comprised of knowledgeable individuals... Bahahahahahahahahaha! Classic!! CanadianPatriot, thank you sooooo much, as I needed a good laugh. Nearly split my sides, I did. Please, do not inbox me, as my group of friends is full, unless you want to be the "class clown/side kick" whenever we hit the town? ...(please do not inbox me not