Vanstar Mining Resources Inc. VMNGF

News: Vanstar’s Partner IAMGOLD Reports a Drill holes

[Veritas33]

Vanstar’s Partner IAMGOLD Reports a Drill Intersection of 82.6 Metres at 3.31 g/t Au on the Nelligan Gold Project

Mr. Guy Morissette reports:

THIS NEWS RELEASE IS NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES FOR DISSEMINATION IN THE UNITED STATES

LA PRAIRIE, Quebec, Nov. 15, 2018 (GLOBE NEWSWIRE) -- The management of Vanstar Mining Resources Inc. (« Vanstar ») is very pleased to announce that IAMGOLD Corporation, Vanstar's partner in the development of the Nelligan gold project, intersected a series of significant drill results from the Renard and 36 zones. These results come from 11 drill holes for a total of 4,404 metres. Results from an additional series of 9 drill holes totaling 4,487 metres will be released as soon as they become available.

The assay results reported herein are provided in Table 1 below and include the following highlights:

36 West Zone:

• Drill hole NE-18-81: 12.2 metres grading 3.93 g/t Au 
  includes: 0.8 metres grading 34.3 g/t Au
   
• Drill hole NE-18-86: 24.2 metres grading 1.33 g/t Au 
  includes: 5.6 metres grading 3.51 g/t Au
   
• Drill hole NE-18-89: 14.3 metres grading 2.26 g/t Au 
  includes: 4.4 metres grading 4.60 g/t Au

Renard Zone:

• Drill hole NE-18-81: 23.5 metres grading 1.68 g/t Au 
  includes: 7.5 metres grading 3.70 g/t Au
  
  and 37.5 metres grading 1.61 g/t Au 
   
• Drill hole NE-18-83: 14.5 metres grading 2.31 g/t Au 
  includes: 7.0 metres grading 4.10 g/t Au
  
  and 31.5 metres grading 1.19 g/t Au
  includes: 6.0 metres grading 3.22 g/t Au 
   
• Drill hole NE-18-84: 33.1 metres grading 1.26 g/t Au 
  
  and 82.6 metres grading 3.31 g/t Au
  includes: 1.5 metres grading 20.9 g/t Au
  includes: 1.5 metres grading 74.9 g/t Au
   
• Drill hole NE-18-87: 37.4 metres grading 0.95 g/t Au 
  
  and 27.2 metres grading 3.48 g/t Au
  includes: 7.5 metres grading 9.55 g/t Au
   
• Drill hole NE-18-89: 2.54 metres grading 16.12 g/t Au 
  
  and 15.8 metres grading 1.69 g/t Au
  and 12 metres grading 1.12 g/t Au
  and 13.5 metres grading 1.27 g/t Au

The 2018 diamond drilling program was designed to evaluate the resource potential of the recently discovered mineralization system, referred to as the Renard Zone, located immediately north of the previously known Liam and Dan zones.

Craig MacDougall, Senior Vice President, Exploration for IAMGOLD, stated: "The 2018 drilling program continues to deliver positive results, and as previously reported, continues to intersect wide zones of alteration and associated mineralization. These results are being incorporated to develop a preliminary deposit model and guide future drilling campaigns to support the completion of an initial resource estimate."

Guy Morissette, CEO of Vanstar stated: "We are very pleased with these very promising results. This vast gold system remains open lateraly and at depth. This allows us to believe that we may be in the presence of a significant gold deposit "

About the Nelligan Project

The Nelligan Project is held under an earn-in option to joint venture agreement with Vanstar. IAMGOLD holds an undivided 51% interest in the property, and holds an option to earn a further 24% undivided interest in exchange for cash payments totaling C$2,750,000 to Vanstar and the delivery of an NI 43-101 compliant Resource Estimate Technical Report before March 2022. Once vested to an undivided 75% interest, IAMGOLD will have a further option to acquire an additional interest of 5%, to hold an 80% interest in the Nelligan project by completing and delivering a Feasibility Study. Vanstar would then retain a 20% undivided non-contributory carried interest until the commencement of commercial production, after which: (1) the 20% undivided interest becomes participating; and (2) Vanstar will pay its attributable portion of the total development and construction costs to the commencement of commercial production from 80% of its share of any ongoing distributions from the Joint Venture. Vanstar will also retain a 1% NSR royalty on selected claims of the project.

This press release was read and approved by Gilles Laverdire, Vanstar's Geologist and Qualified Person under NI-43-101.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Source :

Guy Morissette
CEO Vanstar Mining Resources Inc.
[e-mail] 
819-763-5096

Notes :

1. True width of the intersections are 70 to 94 % of the core width.
2. Drill hole Intersections are calculated according to a grade cut of 0,50 g Au/t and can contain widths up to 5 metres of weaker values. They are generally reported for minimum values of 5 g*m (metal factor).
3. The assays are not caped, but the sub-widths of higher grade are highlighted.

The Information in a Stockhouse Publishing Ltd. Stockhouse News Blast is A PAID ADVERTISEMENT and is for the viewers information only. Vanstar Mining Resources Inc. has paid a fee not exceeding $2500.00 in cash or stock to have their corporate information featured. The corporate information is purely and solely the responsibility of Vanstar Mining Resources Inc. and it is neither commented upon, researched, or in any manner the responsibility of Stockhouse Publishing Ltd., whose only function is as a supplier of media facilities. Any information provided by the advertisers of Stockhouse Publishing Ltd., through its media services, is not to be construed as a recommendation or suggestion or offer to buy or sell securities, but is provided purely as an informational media service. Stockhouse Publishing Ltd. makes no warranties or undertakings as to the accuracy or completeness of this information. All due diligence should be done by the reader or their financial advisor. Investing in securities is speculative and carries risk. Persons who wish to buy or sell securities should only do so in consultation with their registered securities advisers.