Rare Element Resources Ltd. (NYSE MKT: REE and TSX: RES), a
mineral resources company advancing development of the Bear Lodge
Critical Rare Earth Project, is pleased to announce that its pilot plant
test program, conducted at SGS Lakefield Canada, validated the
significant benefits of the Company’s proprietary processing technology
and identified the opportunity for additional Project improvements.
“Our pilot plant testing was an unqualified success not only in
demonstrating on a larger scale the benefits of our process in the
critical metrics of achieving high bulk concentrate purity, excellent
recoveries and substantially reducing reagent costs but also in
identifying additional opportunities for improved efficiencies and cost
savings,” stated Jaye Pickarts, Chief Operating Officer. “The testing
also confirmed the effectiveness of an innovative process to isolate the
Thorium and Uranium, which are usually associated with rare earth
deposits, making for safe, controlled disposal. Equally significant, it
was recognized that because of the purity of the concentrate, downstream
elemental separation should be evaluated for the additional value it
could bring to the project. We will begin work on evaluating the
technology alternatives for separation and assessing end-user needs to
determine the most attractive product mix.”
The test work confirmed the following key advancements:
-
The ability of the Company’s proprietary technology, under optimized
pilot plant conditions, to separate rare earths from base metals by
selective precipitation, in a single step process, producing a 97%
pure bulk total rare earth element (REE) concentrate.
-
The tests of various REE mineral types responded well to acid
digestion, resulting in leach efficiencies averaging 95%. This
contributed to high overall REE recoveries that averaged 85% in a
combined physical upgrade (PUG) and hydrometallurgical (Hydromet)
process.
-
The capacity to regenerate and recycle the major acid reagents used in
the process, leading to an anticipated reduction in related raw
material costs of approximately 50%. The recycle process resulted in
the elimination of process effluents, reconfirming that there will be
“zero-discharge” from the facility.
-
The effectiveness of a newly identified process to isolate Thorium
(Th) and Uranium (U) from the residual solids and final REE bulk
concentrate to allow for easy 3rd party disposal. This
represents a significant advancement in the treatment of radionuclides
in rare earth mining, and as such, the Company has secured a
provisional patent for the process.
-
The opportunity to beneficiate certain naturally occurring,
potentially valuable by-products, representing the opportunity for
additional revenue streams and reduced waste.
The pilot plant test work was conducted at SGS Lakefield under the
supervision and oversight of Dr. Henry Kasaini, Director of Science and
Technology for Rare Element Resources. The pilot test work focused on
confirming the flow sheets for both the PUG and Hydromet process. The
plant tested four different ore types, with total rare earth oxide
(TREO) head grades averaging 4.8% from Bull Hill and 2.7% from Whitetail
Ridge. The work was conducted over a four week period at a production
scale of 240kg/day.
Feasibility Study
Activities in support of the upcoming Feasibility Study began in
mid-2013, with the start of the pilot plant test program and several
engineering-related trade-off studies. Along with the multiple
advantages of the Company’s proprietary processes, pilot plant testing
and engineering trade-off studies identified a possible modification to
the PUG process that, if proven successful, would significantly reduce
capital and operating costs without significantly impacting recoveries.
Engineering and bench-scale testing will begin immediately on this
potential change with additional pilot plant studies anticipated in
early 2014. To ensure consideration of the results of this work and the
multiple trade-off studies undertaken by the Company over the last six
months, as well as the results of the recent drill campaigns, the
detailed design and economic analysis portion of the Feasibility Study
is now expected to start in the first half of 2014.
Proprietary Recovery Process
As currently proposed, mined ores would be beneficiated using some
combination of crushing, screening, gravity and magnetic separation at a
PUG plant to be located adjacent to the mine. During pilot plant
testing, the developed PUG flow sheet was optimized to reduce feed mass
from Bull Hill ore by 20% and from Whitetail ore by 45%. This resulted
in a final PUG concentrate with average REE recoveries of 95% and 86%,
respectively.
The resulting mineral pre-concentrate was then subjected to the Hydromet
process which employs a hot chloride solution to extract the REEs into a
pregnant leach solution (PLS). Using closed reactor vessels, the PLS
reacted with oxalate reagents under optimized conditions to facilitate
selective precipitation of REEs with impurities remaining in solution.
During testing, approximately 97% of total REEs were selectively
separated in the oxalate precipitation process, with about 98 to 99% of
the total base metals and silica remaining in the barren solution.
Because of the base metal concentration, it should be possible using a
crystallization acid distillation process to beneficiate base metals
separately. The potential value of these byproducts to the Company will
be evaluated.
A significant amount of HCl remained in the PLS. Testing confirmed that
at elevated temperatures, the addition of oxalic acid helped to generate
HCl after precipitation of the REEs. As a result, the waste solution had
a significant amount of free acid and water that was recoverable.
Approximately 80% of total free acid was recovered by distillation and
re-constituted through a rectifier as azeotropic HCl (20% strength).
This is expected to result in a 50% reduction in required fresh HCl at
the leach step. Water recycling of between 80 to 90% was accomplished,
which would significantly reduce fresh water needs as well.
Thorium Isolation and Removal
During the acid digestion portion of the process, between 82 and 90% of
the total Th and low level U associated with the ore was digested along
with the REEs and subsequently transferred to the PLS. This resulted in
a leach residue, with Th and U concentrations significantly lower than
background, that could be disposed of safely in a controlled tailings
storage facility.
As the PLS continues through oxalate precipitation, the REEs and Th are
sequestered in a bulk oxalate precipitate, leaving base metal impurities
and U in the now barren PLS. The next step in the process
recovers significant amounts of oxalate and acid reagents from the
barren PLS by crystallization, reducing raw materials costs, while the
base metals and U remained in the final distillation residue. They can
be treated further for potential economic recovery or disposed of in a
tailings storage facility.
The new Provisional Patent applies to the innovative process where all
Th is selectively removed from the REE concentrate, resulting in a 97%
pure final bulk concentrate product. At this stage, additional oxalate
reagents are also recovered, further improving the economics of the
project. The Th could then be transferred to an off-site licensed
disposal facility.
Rare Element Resources Ltd. is a publicly traded mineral resource
company focused on exploration and development of rare-earth element
deposits, specifically those with significant distribution of critical
rare earths. The Company is advancing development of the Bear Lodge
Project, located in northeast Wyoming. Bear Lodge is a significant
mineralized district containing many of the less common, more valuable
critical rare earths that are essential for electronics, fiber optics,
laser systems for health and defense, as well as many evolving green
technologies, like hybrid cars, solar panels and wind turbines.
Permitting and feasibility work on the Project is currently underway.
For additional information, please visit the Company’s website at www.rareelementresources.com
or contact Robbin Lee at 720-278-2462 or rlee@rareelementresources.com.
Jaye T Pickarts, P.E., Rare Element's internal, qualified person under
Canadian NI 43-101, supervised the preparation of the scientific and
technical information concerning the Company's mineral project and
process contained in this news release. For a description of the key
assumptions, parameters and methods used in the testing discussed in
this release, as well as data verification procedures and a general
discussion of the extent to which the estimates may be affected by any
known environmental, permitting, legal, title, taxation,
socio-political, marketing or other relevant factors, please see the
Technical Reports for our project as filed on SEDAR at www.sedar.com.
Forward-Looking Statements
This news release contains forward-looking statements within the meaning
of securities legislation in the United States and Canada. Except for
statements of historical fact, certain information contained herein
constitutes forward-looking statements. Forward-looking statements are
usually identified by our use of certain terminology, including "will",
"believes", "may", "expects", "should", "seeks", "anticipates", "plans",
"has potential to", or "intends" or by discussions of strategy or
intentions. Such forward looking statements include statements regarding
the processing test work and expected results, permitting process and
progress, and project development plans for the future. Such
forward-looking statements involve known and unknown risks,
uncertainties and other factors which may cause our actual results or
achievements to be materially different from any future results or
achievements expressed or implied by such forward-looking statements.
Factors that could cause actual results to differ materially include,
but are not limited to, the progress of our Bear Lodge Project,
fluctuations in demand for, and price of, rare earth products; success
of process technology under testing; timing of and unexpected events at
the Bear Lodge property; delay or failure to receive government
approvals and permits; changes in U.S. and Canadian securities markets;
and general economic conditions. There can be no assurance that future
developments affecting the Company will be those anticipated by
management. Please refer to the discussion of these and other factors
set out in our filings made from time to time with the SEC and Canadian
regulators, including but without limitation, our reports on Form 10-K
and Form 10Q. We expect that the above estimates as to development
plans, technology and other processes, time frames and financial needs
will change as new information is received and that actual results will
vary from these estimates, possibly by material amounts. While we may
elect to update these estimates at any time, we do not undertake to
update any estimate at any particular time or in response to any
particular event. Investors and others should not assume that any
forecasts in this press release represent management's estimate as of
any date other than the date of this press release.
![](http://cts.businesswire.com/ct/CT?id=bwnews&sty=20131111005328r1&sid=ntxv4&distro=nx)
Copyright Business Wire 2013