Faraday 2 size increases with multiple 50m kimberlite intercepts
Additional kimberlite intersected in Kelvin geotechnical drill hole
Shares Issued and Outstanding: 50,867,933
TSX-V: KDI
TORONTO, Aug. 4, 2017 /CNW/ - Kennady Diamonds Inc. ("Kennady
Diamonds", the "Company") (TSX-V: KDI) is pleased to provide an update on the summer drilling program on the Kennady North
Project. The program is approaching the halfway mark with nearly 50% of the planned 3,000m of drilling completed. Included in
these latest results are three exploration holes on the Faraday 2 kimberlite that have returned robust kimberlite intercepts
approaching 50m or greater.
President and CEO of Kennady Diamonds, Dr. Rory Moore commented: "We are pleased to continue
our success from last fall with the exploration of the Faraday 2 kimberlite, with all three holes returning significant and
consistent kimberlite intercepts. The results suggest that Faraday 2 is maintaining a constant depth and a significant volume as
it tracks in a WNW direction away from Faraday Lake. In a mining scenario this is an optimum orientation for the Faraday 2
body."
During this first half of the summer program, a geotechnical hole was also drilled adjacent to the Kelvin kimberlite for the
purpose of collecting the remaining geotechnical data required to complete a pre-feasibility study of the Kelvin kimberlite. In
this exercise, 23 meters of volcaniclastic kimberlite was intersected at 59 meters in a drill hole angled at 45 degrees.
With respect to the Kelvin drilling, Dr. Moore added "While intersecting kimberlite at Kelvin was not the primary goal, it is
worth noting that the kimberlite intersection is better than predicted from the current geological model. In addition, over seven
meters of coherent kimberlite was intersected past the main intercept, representing three kimberlite sheets each over two meters
in width. Although this sheet complex is not currently considered in the Kelvin resource, a significant part of it will be
processed in an open pit mining scenario, which is accretive to the overall project
economics".
Drilling will continue on the Faraday 2 kimberlite, after which the rig will be moved to the Faraday 1–3 complex where at
least one hole will be drilled to test the connection at depth between the Faraday 1 and 3 kimberlites. This drill hole
will also be designated to collect geotechnical as well as environmental data relevant to open pit and underground mining.
Table 1 below summarizes the drill results to date for the summer 2017 program.
Table 1
Faraday 2017 Summer Drill Program
Drill Hole
|
Target
|
Azimuth
|
Inclination
|
Kimberlite Intercepts (m)
|
End of
Hole
(m)
|
From
|
To
|
Intercept*
|
KDI-17-002a
|
Faraday 2
|
102
|
-90
|
204.50
|
253.20
|
48.70
|
280
|
KDI-17-002b
|
Faraday 2
|
315
|
-80
|
217.00
|
273.00
|
56.00
|
304
|
KDI-17-003
|
Faraday 2
|
235
|
-65
|
246.20
|
299.30
|
53.10
|
310
|
KDI-17-001
|
Kelvin
|
045
|
-45
|
58.94
|
82.38
|
23.44
|
295
|
*Intercepts not true widths.
|
Dr. Moore concludes, "Our systematic approach to exploring the Faraday kimberlites is adding significant value with each
kimberlite intercept, as we build additional tonnage to add to the high-grade Kelvin diamond resource already defined on the
Kennady North Project."
About Kennady Diamonds
Kennady Diamonds Inc. controls 100 percent of the Kennady North diamond project located in Canada's Northwest Territories. Kennady North is adjacent to the Gahcho Kué
Diamond Mine, a joint venture between De Beers Canada (51%) and Mountain Province (49%), which
started production in late 2016. Kennady is focused on expanding its high-grade diamond resources along the Kelvin – Faraday
kimberlite corridor, as well identifying new kimberlites outside of the corridor. To date an indicated resource of 13.62 million
carats of diamonds contained in 8.50 million tonnes of kimberlite, with a grade of 1.60 carats per tonne and an average value of
US$63 per carat has been defined for the Kelvin kimberlite using a 1mm diamond bottom cutoff size.
The Kelvin – Faraday corridor is also a target for further exploration.
Qualified Persons
This news release has been prepared by Dr. Rory Moore, P.Geo., President and CEO of
Kennady Diamonds. The technical contents of this news release have been reviewed and approved by Dr. Tom
McCandless, P. Geo., an independent director of Kennady Diamonds and Qualified Person under National Instrument
43-101.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) has reviewed or accepts responsibility for the adequacy or accuracy of this release.
FORWARD LOOKING INFORMATION
This news release includes certain information that may constitute "forward-looking information" under applicable
Canadian securities legislation. Forward-looking information includes, but is not limited to, the Company's strategic plans,
future operations, future work programs and objectives. Forward-looking information is necessarily based upon a number of
estimates and assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other
factors which may cause the actual results and future events to differ materially from those expressed or implied by such
forward-looking information. There can be no assurance that such information will prove to be accurate, as actual results and
future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue
reliance on forward-looking information. All forward-looking information contained in this press release is given as of the date
hereof and is based upon the opinions and estimates of management and information available to management as at the date hereof.
The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new
information, future events or otherwise, except as required by law.
SOURCE Kennady Diamonds Inc.
View original content: http://www.newswire.ca/en/releases/archive/August2017/04/c7393.html