Highlights
- Drill Hole NC-249, the northernmost hole, intersected extensive mineralization including 53.8m of 2.8% Zn Eq. starting at a depth of 18.5m including higher grade
intervals;
- These drill four holes have expanded the lateral extent of the northernmost area of the Nash Creek Deposit up to
260m; and
- Plans to delineate the extent of the Nash Creek Deposit along strike in both directions along a 3 km long zinc-lead soil
anomaly, of which only the southern 2 km has been drilled.
VANCOUVER, Jan. 22, 2018 /CNW/ - Callinex Mines Inc. (the "Company" or "Callinex") (TSX-V: CNX; OTCQX: CLLXF) is pleased to announce assay
results from four drill holes as part of the recently completed 35 drill hole campaign at the Company's 100% owned Nash Creek
Deposit located within the Bathurst Mining District of New Brunswick (See Figures 1, 2 and 3). Three of these four drill holes expanded the Nash Creek Deposit to the northwest of
recently reported drill holes NC17-248, NC17-255, NC17-257 and NC17-269 (See News Release dated January
18, 2018). Drill Hole NC-249, the northernmost hole, intersected extensive mineralization including 53.8m of 2.8% Zn Eq. starting at a depth of 18.5m including two separate
higher-grade intervals of 11.5m of 5.1% Zn Eq. and 10.7m of 4.0% Zn
Eq. within 60m of surface (See Figures 4 and 5). These drill holes
have expanded the lateral extent of the northernmost area of the Nash Creek Deposit up to 260m (See
Figure 2 and 3).
Highlights from these drill holes include:
- Hole NC17-246 intersected 12.0m of 3.9% Zn Eq. from a starting depth of 44.1m including 8.4m of 5.3% Zn Eq. along with a separate intersection of
3.3m grading 4.4% Zn Eq. at a starting depth of 84.7m;
- Hole NC17-247 intersected 7.0m of 1.9% Zn Eq. at a starting depth of 82.0m including 1.0m of 6.1% Zn Eq.; and
- Hole NC17-249 intersected 53.8m of 2.8% Zn Eq. including 11.5m of 5.1% Zn Eq. at a starting depth of 18.5m including 11.5m of 5.1% Zn Eq. and 10.7m of 4.0% Zn Eq.
Max Porterfield, President and CEO, stated, "The impressive width of mineralization intersected
indicates potential to build additional tonnage in the northern expansion of the Nash Creek Deposit. Furthermore, the depth of
this mineralization combined with higher grade zones could add significant value to the upcoming PEA."
Callinex plans to delineate the extent of the Nash Creek Deposit along strike in both directions that is coincident with a 3
km long zinc-lead soil anomaly, of which only the southern 2 km has been drilled. The Company also plans to test satellite
zones that are open for expansion and commence a district-scale exploration program along the 20 km long land package.
The Nash Creek Deposit hosts a near surface indicated resource totaling 712 million pounds Zn. Eq. and inferred resource
totaling 88 million pounds of Zn Eq. (See Table 2). The Company's Superjack hosts an additional near-surface inferred
resource totaling 328 million pounds of Zn Eq. in the Bathurst Mining District (See Table 2).
The Project benefits from tremendous infrastructure within close proximity. The Nash Creek Deposit is located approximately 1
km from Provincial Highway 11, high-voltage transmission lines and only 25 km by road to Glencore's Brunswick Smelter, deep water
port, railway and power plant near the town of Belledune (See
Figures 1 and 2). Callinex is currently working towards publishing an updated resource estimate and maiden Preliminary
Economic Assessment ("PEA").
The PEA is expected to have a base-case scenario of a standalone open pit operation with potential to process between 15 to 20
million tonnes of material using dense media separation ("DMS") as a pre-concentration process before the material would be
delivered to a conventional flotation mill.
Metallurgical test work indicates the Nash Creek Deposit is amenable to conventional flotation techniques with recoveries of
91% for zinc and 82% for lead based on a coarse grind size. Additional tests also indicate that the current resource grade could
be upgraded with the use of dense media separation to a head grade of 5-7% Zn Eq. (See News Release dated September 12, 2016).
Jason Levers, P.Geo, a qualified person under National Instrument 43-101 and Project Geologist
for Callinex, has reviewed and approved the technical information in this news release.
Figure 1: Map of the Bathurst Mining District of New Brunswick
Figure 2: Plan
Map of the Nash Creek Deposit
Figure 3: Plan Map of the Nash Creek Deposit Expansion Holes
Figure
4: Long Section View of the Nash Creek Deposit
Figure
5: Cross Section View of Reported Drill Holes
Table 1: Nash Creek Drill Results
Nash Creek Drill Results (1)(2)(3)
|
Drill Hole
|
From
(m)
|
To
(m)
|
Interval
(m)
|
Zn Eq.
(%)
|
Zn
(%)
|
Pb
(%)
|
Ag
(g/t)
|
NC17-246
|
44.1
|
56.0
|
12.0
|
3.85
|
3.09
|
0.41
|
17.36
|
including
|
47.1
|
55.6
|
8.4
|
5.25
|
4.23
|
0.56
|
22.96
|
and
|
84.7
|
88.0
|
3.3
|
4.35
|
3.22
|
0.58
|
27.33
|
and
|
109.0
|
110.0
|
1.0
|
3.03
|
0.84
|
2.17
|
12.65
|
and
|
133.9
|
135.4
|
1.5
|
3.86
|
1.50
|
2.52
|
7.08
|
NC17-247
|
82.0
|
89.0
|
7.0
|
1.90
|
1.67
|
0.26
|
0.14
|
including
|
83.0
|
84.0
|
1.0
|
6.11
|
4.94
|
1.34
|
0.09
|
and
|
108.8
|
110.3
|
1.5
|
1.90
|
1.77
|
0.15
|
0.07
|
NC17-249
|
10.5
|
113.0
|
102.5
|
1.94
|
1.67
|
0.26
|
1.76
|
including
|
18.5
|
72.3
|
53.8
|
2.78
|
2.44
|
0.35
|
1.51
|
including
|
22.0
|
33.5
|
11.5
|
5.08
|
4.62
|
0.45
|
2.91
|
and
|
45.3
|
56.0
|
10.7
|
4.01
|
3.55
|
0.51
|
0.37
|
NC17-250
|
No Significant Results
|
Notes(1)(2)(3):
|
1.
|
Zinc equivalent grades are based on the following metal prices: zinc
US$2,525/t (1.15/lb), lead US$2,205/t (1.00/lb), and silver US$18.0 per oz. Metal recoveries of 100% were applied in the
metal equivalent calculations. The zinc equivalent calculation is as follows: ZnEq = 100 ((Ag Price in (g) x Ag Grade) +
(Pb Price*2204.6 x Pb Grade(%)/100) + (Zn Price*2204.6 x (Zn Grade(%)/100))/Zn Price*2204.6).
|
2.
|
The numbers may not add due to rounding.
|
3.
|
All intervals are reported as core width drilled thicknesses; true
thicknesses are estimated to be 80-100% of drilled thicknesses.
|
Table 2: 2016 Mineral Resource Estimates for the Nash Creek and Superjack Projects
Indicated Mineral Resources
|
Project
|
Tonnes
|
Zn Eq.
(%)
|
Zn
(%)
|
Pb
(%)
|
Ag
(g/t)
|
Cu
(%)
|
Contained Zn Eq.
('000 pounds)
|
Nash Creek
|
9,033,000
|
3.58
|
2.79
|
0.57
|
18.16
|
n/a
|
711,991
|
Total
|
9,033,000
|
3.58
|
2.79
|
0.57
|
18.16
|
n/a
|
711,991
|
Inferred Mineral Resources
|
Project
|
Tonnes
|
Zn Eq.
(%)
|
Zn
(%)
|
Pb
(%)
|
Ag
(g/t)
|
Cu
(%)
|
Contained Zn Eq.
('000 pounds)
|
Superjack
|
3,211,000
|
4.63
|
3.01
|
0.78
|
29.46
|
0.27
|
327,618
|
Nash Creek
|
1,113,000
|
3.58
|
2.83
|
0.57
|
15.51
|
n/a
|
87,883
|
Total
|
4,324,000
|
4.36
|
2.96
|
0.73
|
25.87
|
0.20
|
415,501
|
Notes:
|
1.
|
Resources are categorized according to CIM Definition Standards; it cannot
be assumed that all or any part of Inferred Mineral Resources will be upgraded to Indicated or Measured as a result of
continued exploration.
|
2.
|
The Nash Creek mineral resource estimate includes the Hickey Zone and Hayes
Zone.
|
3.
|
The Superjack mineral resource estimates includes the Nepisiguit A (the "A
Zone") and Nepisiguit C Zones (the "C Zone").
|
4.
|
Zinc equivalent resources for the Nash Creek Project were calculated using
metal prices of $0.90/lb for zinc, $0.87/lb for lead, and $17.73/oz for silver. Metallurgical recoveries have been
assumed to be 90.5% for zinc, 81.5% for lead and 50% for silver. A cut-off grade of 2.0% Zn Eq. was utilized in the
resource estimate.
|
5.
|
Zinc equivalent resources for the Superjack Project were calculated using
metal prices of $1.12/lb for zinc, $1.06/lb for lead, $2.97/lb for copper and $20.38/oz for silver. Metal recoveries have
been assumed to be 100% for zinc, 72% for lead, 86% for copper and 70% for silver. A cut-off grade of 1.5% Zn Eq. was
utilized in the resource estimate.
|
Table 3: NQ Diamond Drill Hole Data
Hole ID
|
UTM Zone 19T NAD 83 East
|
UTM Zone 19T NAD 83 North
|
Elevation (m)
|
Azimuth ( o N UTM)
|
Dip ( o )
|
Length (m)
|
NC17-246
|
716830
|
5308792
|
56
|
0
|
-90
|
141
|
NC17-247
|
716881
|
5308881
|
62
|
0
|
-90
|
138
|
NC17-249
|
716850
|
5308951
|
63
|
0
|
-90
|
186
|
NC17-250
|
716820
|
5308872
|
68
|
0
|
-90
|
126
|
QA/QC
Individual samples were labeled, placed in plastic sample bags, and sealed. Groups of samples were then placed in security
sealed bags and shipped directly to SGS Canada Inc in Vancouver, B.C. for analysis. Samples were
crushed to 75% passing 2mm and pulverized to 85% passing 75 microns in order produce a 250g split. All copper, zinc and silver
assays were determined by Aqua Regia digestion with a combination of ICP-MS and ICP-AES finish, with overlimits (>100 ppm Ag,
>10,000 ppm Zn, and >10,000 ppm Cu) completed by fire assay with gravimetric finish (Ag) or Aqua Regia digestion with
ICP-AES finish (copper and zinc). All samples were analyzed for gold by Fire Assay of a 30 gram charge by AAS, or if over 10.0
g/t were re-assayed and completed with a gravimetric finish. QA/QC included the insertion and continual monitoring of numerous
standards and blanks into the sample stream at a frequency of 1 per 10 samples, and the collection of duplicate samples at random
intervals within each batch at a frequency of 1 per 10 samples.
SGS Canada Inc carried out some or all of following methods to obtain the assay results for Callinex: G_LOG02 Pre-preparation
processing, G_WGH79 Weighing and reporting, G_PRP89 Weigh, dry, crush, split, pulverize, G_SCRQC QC for crush and pulverize
stages, G_CRU22 Crush >3kg, G_DRY11 Dry samples, GE_FAA313 @Au, FAS, AAS, 30g-5ml (Final mode), GE-IC14A Aqua Regia
digestion/ICP-AES finish, GE_IMS14B Aqua Regia digestion/ICP-MS package, GE_IMS14 Aqua Regia digestion, GO_FAG303 30g, Fire
assay, gravimetric finish (Au)(Final Mode), GO_FAG313 30g, Fire assay, gravimetric finish (Ag)(Final Mode), G0_ICP13B Ore Grade,
Aqua Regia digest/ICP-AES. Ag >10ppm was analyzed by ICP and GO_XRF77B-pyrosulfate fusion.
About Callinex Mines Inc.
Callinex Mines Inc. (TSX-V: CNX ; OTCQX: CLLXF) is advancing its portfolio of zinc rich deposits located in established
Canadian mining jurisdictions. The portfolio is highlighted by its Nash Creek and Superjack
deposits in the Bathurst Mining District of New Brunswick. Callinex is actively drilling these
projects in support of an updated resource estimate and maiden PEA planned for Q2 2018.
Additionally, Callinex is actively exploring its projects in the Flin Flon Mining District of Manitoba which notably include the Pine Bay and Big Island Projects. These projects are located within 25 km
to an operating processing facility that requires additional ore within four years.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Some statements in this news release contain forward-looking information. These statements include, but are not limited to,
statements with respect to future expenditures. These statements address future events and conditions and, as such, involve known
and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be
materially different from any future results, performance or achievements expressed or implied by the statements. Such factors
include, among others, the ability to complete the proposed drill program and the timing and amount of expenditures. Except as
required under applicable securities laws, Callinex does not assume the obligation to update any forward-looking
statement.
SOURCE Callinex Mines Inc.
View original content: http://www.newswire.ca/en/releases/archive/January2018/22/c1928.html