CALGARY, Alberta, Nov. 21, 2018 (GLOBE NEWSWIRE) -- Copper Fox Metals Inc. (“Copper Fox” or the “Company”) (TSX-V: CUU –
OTC-Pink: CPFXF) and its wholly owned subsidiary, Desert Fox Copper Inc. (“Desert Fox”), are pleased to
provide the analytical results for the Phase-1 sampling program on its 100% owned Mineral Mountain copper project located
approximately 15 miles east of Florence, Arizona (see news release dated October 25, 2018). The Phase-1 program focused
on mapping and sampling four target areas of the Mineral Mountain project.
Highlights:
- The mineralized areas in Target #1 and Target #2 have been extended and remain open.
- The sampling confirmed significant mineralization in the recently announced new target area (Target #3) located
400 meters (“m”) south of Target #1 and remains open in three directions.
- The fourth target area (limited work) returned copper concentrations of up to 6,600 ppm in diabase.
- 179 of the 278 new copper showings located during Phase-2 were sampled, analysis is pending.
Elmer B. Stewart, President and CEO of Copper Fox, stated, “The Phase-2 program has expanded the areas of
visible porphyry mineralization at Mineral Mountain. The discovery of mineralized porphyritic phases and disseminated
mineralization combined with widespread visible copper mineralization adds considerably to the potential of the project. The
significant number of samples with high grade copper values from the Phase-1 sampling program is attributed to the presence of
chalcocite and is in line with the previously defined ‘leach cap’. Results for the samples collected in Phase-2 are pending
and will be released on receipt thereof.”
Geological Model:
The surface mineralization represents weathered porphyry copper mineralization (a “leach cap”) sitting above a buried porphyry
copper system (see news release dated April 30, 2018).
Phase-1 Analytical Results:
The approximate dimensions of the mineralized zones and average concentrations of the metals for three of the four target areas
sampled are tabulated below (see tables below for individual sample results).
|
|
|
|
|
|
Average
Concentration |
|
Target |
# of samples |
Length (m) |
Width (m) |
Copper (ppm) |
Copper (%) |
Molybdenum
(ppm) |
Gold (ppb) |
Silver (ppm) |
1 |
10 |
1,200 |
800 |
18,178 |
1.820 |
20.2 |
129.8 |
4.6 |
2 |
18 |
1,200 |
400 |
15,929 |
1.590 |
27.8 |
36.5 |
12.3 |
3 |
33 |
800 |
500 |
8,527 |
0.850 |
41.5 |
94.0 |
12.7 |
Note: (ppm) parts per million, (ppb) parts per
billion |
Target #1:
This area covers the northern extension of the mineralized area outlined in 2016. The Phase-2 work indicates
that the mineralization in this area remains open in three directions. Analytical results for the samples collected from this
area are shown below:
Sample ID |
Cu
(ppm) |
Cu
(%) |
Mo
(ppm) |
Au
(ppb) |
Ag
(ppm) |
Sample
ID |
Cu
(ppm) |
Cu
(%) |
Mo
(ppm) |
Au
(ppb) |
Ag
(ppm) |
MM-296 |
8320 |
0.832 |
10.7 |
38 |
2.1 |
MM-304 |
32300 |
3.230 |
93.6 |
797 |
14.1 |
MM-297 |
5970 |
0.597 |
22.5 |
22 |
1 |
MM-305 |
4030 |
0.400 |
14 |
11 |
0.8 |
MM-298 |
8780 |
0.878 |
6.6 |
55 |
10.3 |
MM-306 |
17700 |
1.770 |
0.2 |
8 |
0.9 |
MM-299 |
96000 |
9.600 |
27.6 |
323 |
14.9 |
MM-313 |
2370 |
0.237 |
3.6 |
26 |
1.1 |
MM-300 |
2940 |
0.294 |
11.7 |
7 |
0.4 |
MM-314 |
3370 |
0.337 |
11.7 |
11 |
0.4 |
Target #2:
This area is located southeast of Target #1. Mineralization is open to the west. The majority of the mineralization
occurs in the Laramide age dikes as well as in Precambrian diabase. Analytical results for the samples collected in this area
are shown below:
Sample ID |
Cu
(ppm) |
Cu (%) |
Mo (ppm) |
Au
(ppb) |
Ag (ppm) |
Sample
ID |
Cu
(ppm) |
Cu (%) |
Mo (ppm) |
Au
(ppb) |
Ag (ppm) |
MM-291 |
4700 |
0.470 |
23.6 |
8 |
1.2 |
MM-309 |
4870 |
0.487 |
17.4 |
42 |
1.1 |
MM-292 |
5500 |
0.550 |
32.1 |
28 |
2.6 |
MM-310 |
67300 |
6.730 |
26.1 |
91 |
8.2 |
MM-293 |
6170 |
0.617 |
9.3 |
25 |
0.8 |
MM-311 |
3010 |
0.301 |
8.3 |
16 |
0.7 |
MM-294 |
28700 |
2.870 |
42.5 |
61 |
1.1 |
MM-312 |
5770 |
0.577 |
14.7 |
206 |
1.3 |
MM-295 |
15800 |
1.580 |
87.9 |
77 |
0.7 |
MM-315 |
8880 |
0.888 |
1.7 |
22 |
13.6 |
MM-302 |
25800 |
2.580 |
44.7 |
356 |
0.6 |
MM-316 |
30000 |
3.000 |
13.4 |
10 |
154 |
MM-303 |
5890 |
0.589 |
4.9 |
10 |
0.8 |
MM-330 |
8920 |
0.892 |
6.8 |
33 |
19.1 |
MM-307 |
28100 |
2.810 |
27.5 |
195 |
1.9 |
MM-331 |
16700 |
1.670 |
128 |
40 |
7.4 |
MM-308 |
5610 |
0.561 |
9.7 |
21 |
0.9 |
MM-332 |
15000 |
1.500 |
1.1 |
5 |
10.5 |
Target #3:
This area covers the new area of mineralization located approximately 400m south of Target #1 (see news release dated October 25,
2018). Phase-2 work indicates that the mineralization in this area is open to the north toward Target #1 and to the
south. Analytical results for the samples collected in this area are shown below:
Sample ID |
Cu
(ppm) |
Cu (%) |
Mo (ppm) |
Au
(ppb) |
Ag (ppm) |
Sample ID |
Cu (ppm) |
Cu
(%) |
Mo (ppm) |
Au (ppb) |
Ag (ppm) |
MM-270 |
2400 |
0.240 |
5.8 |
6 |
1.5 |
MM-289 |
65600 |
6.560 |
171 |
23 |
107 |
MM-271 |
5880 |
0.558 |
3.4 |
35 |
5.2 |
MM-290 |
10300 |
1.030 |
32.9 |
19 |
5.3 |
MM-272 |
2730 |
0.273 |
82.4 |
16 |
1.3 |
MM-317 |
13100 |
1.310 |
149 |
16 |
155 |
MM-273 |
873 |
0.087 |
2.2 |
12 |
1.2 |
MM-318 |
17500 |
1.750 |
59.9 |
63 |
79.5 |
MM-274 |
122 |
0.012 |
53.6 |
7 |
2.1 |
MM-319 |
8200 |
0.820 |
3 |
114 |
1.6 |
MM-275 |
897 |
0.090 |
0.8 |
5 |
0.6 |
MM-320 |
8150 |
0.815 |
31.9 |
132 |
1.4 |
MM-277 |
32000 |
3.200 |
10 |
320 |
0.9 |
MM-321 |
18100 |
1.810 |
83.4 |
38 |
1.5 |
MM-278 |
8380 |
0.838 |
1.9 |
122 |
10.5 |
MM-322 |
21500 |
2.150 |
34.3 |
26 |
8 |
MM-279 |
5000 |
0.500 |
1.3 |
134 |
0.7 |
MM-325 |
269 |
0.027 |
23.1 |
35 |
2.4 |
MM-280 |
1240 |
0.124 |
0.6 |
24 |
1.1 |
MM-326 |
5000 |
0.500 |
13.3 |
872 |
2.5 |
MM-281 |
1920 |
0.192 |
3.1 |
77 |
0.7 |
MM-327 |
4830 |
0.483 |
85.8 |
8 |
1.5 |
MM-282 |
4840 |
0.484 |
2.3 |
114 |
3.9 |
MM-328 |
4600 |
0.460 |
10.4 |
16 |
2.6 |
MM-283 |
3070 |
0.307 |
1.7 |
31 |
2.3 |
MM-329 |
9520 |
0.952 |
138 |
342 |
2.1 |
MM-284 |
2590 |
0.259 |
339 |
27 |
5.1 |
MM-333 |
5590 |
0.559 |
7.5 |
5 |
0.6 |
MM-285 |
7870 |
0.787 |
1.4 |
67 |
5.5 |
MM-334 |
3070 |
0.307 |
4.8 |
11 |
0.9 |
MM-287 |
454 |
0.045 |
1.5 |
11 |
0.5 |
MM-335 |
5420 |
0.542 |
9.5 |
5 |
2.3 |
MM-288 |
372 |
0.037 |
1.1 |
5 |
0.2 |
|
|
|
|
|
|
Mineralization:
The mineralization occurs in quartz veins, veinlets and sheeted quartz veins (with and without potassic alteration envelopes),
malachite-chalcocite and chalcocite veins and veinlets (of variable thickness), on fractures and as disseminations in potassic and
phyllic altered Laramide age Quartz Monzonite and porphyritic intrusives (containing 15-30% phenocrysts). Copper
mineralization occurs in a number of locations in Precambrian diabase along the contact with the Laramide intrusive. The main
copper minerals are malachite, chrysocolla and chalcocite with minor azurite, native copper and rare chalcopyrite. Gangue
minerals include goethite after pyrite and jarosite.
Analytical and Sampling Procedures:
Outcrop sampling as well as mapping lithologies, alterations, and vein assemblages was completed. Rock chip samples (average 1.4
kilograms) were collected from outcrop to characterize the metals present in veins, other mineralized structures and the
outcrop. Outcrop exposures within the sampled area are estimated to 5-10%. The samples were picked up from site by
Skyline Laboratories of Tucson, Arizona.
Samples were crushed to plus 75% -10 mesh, split and pulverized to plus 95% -150 mesh. Pulps were
subjected to a multi-acid digest (HNO3, HF, HClO4). Gold was analyzed on a 30-gram charge by fire assay
(FA-01) with an atomic absorption finish. Skyline’s package code TE-5 was used to analyze the samples for the base and other trace
elements. Metal concentration in samples exceeding the upper limit of detection were assayed for copper using (MEA) and
silver (FA-04). Skyline has an ISO/IEC 17025/2005 accreditation.
Quality Control:
A total of 1 field blank and 5 certified reference standards were inserted (insertion rate 1:17) with the sample for which analyses
are being reported. QA/QC shows that the blank and standards were within +/-5% of accepted value for the blank and
standards.
Elmer B. Stewart, MSc. P. Geol., President and CEO of Copper Fox, is the Company’s non-independent, nominated
Qualified Person pursuant to National Instrument 43-101, Standards for Disclosure for Mineral Projects, and has reviewed and
approves the scientific and technical information disclosed in this news release.
About Copper Fox:
Copper Fox is a Tier 1 Canadian resource company listed on the TSX Venture Exchange (TSX-V: CUU) focused on copper
exploration and development in Canada and the United States. The principal assets of Copper Fox and its wholly owned Canadian
and United States subsidiaries, being Northern Fox Copper Inc. and Desert Fox Copper Inc., are the 25% interest in the Schaft Creek
Joint Venture with Teck Resources Limited on the Schaft Creek copper-gold-molybdenum-silver project located in northwestern British
Columbia and a 100% ownership of the Van Dyke oxide copper project located in Miami, Arizona. For more information on Copper
Fox’s other mineral properties and investments visit the Company’s website at http://www.copperfoxmetals.com.
On behalf of the Board of Directors
Elmer B. Stewart
President and Chief Executive Officer
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note Regarding Forward-Looking Information
This news release contains forward-looking statements within the meaning of the Section 27A of the Securities
Act of 1933 and Section 21E of the Securities Exchange Act of 1934, and forward-looking information within the meaning of the
Canadian securities laws (collectively, “forward-looking information”). Forward-looking information is generally identifiable by
use of the words “believes,” “may,” “plans,” “will,” “anticipates,” “intends,” “budgets”, “could”, “estimates”, “expects”,
“forecasts”, “projects” and similar expressions, and the negative of such expressions. Forward-looking information in this
news release includes statements regarding: the potential of the Mineral Mountain project; significant mineralization in Target #3;
releasing the results of Phase-2 sampling; and the approximate dimensions of the mineralized zones and average concentrations of
the metals for the target areas.
In connection with the forward-looking information contained in this news release, Copper Fox and its
subsidiaries have made numerous assumptions regarding, among other things: the geological advice that Copper Fox has received is
reliable and is based upon practices and methodologies which are consistent with industry standards and the reliability of
historical reports. While Copper Fox considers these assumptions to be reasonable, these assumptions are inherently subject
to significant uncertainties and contingencies.
Additionally, there are known and unknown risk factors which could cause Copper Fox’s actual results,
performance or achievements to be materially different from any future results, performance or achievements expressed or implied by
the forward-looking information contained herein. Known risk factors include, among others: the dimensions and shape of the
mineralized areas may not be as estimated; the additional samples may not yield significant concentrations of metals; additional
sampling may not locate copper mineralization; the copper concentrations in diabase may not be representative of the mineralization
in Target #2; the surface mineralization may not represent buried porphyry style mineralization; uncertainties relating to
interpretation of the outcrop sampling results; the geology, continuity and concentration of the mineralization; the financial
markets and the overall economy may deteriorate; the need to obtain additional financing and uncertainty of meeting anticipated
program milestones; uncertainty as to timely availability of permits and other governmental approvals.
A more complete discussion of the risks and uncertainties facing Copper Fox is disclosed in Copper Fox's
continuous disclosure filings with Canadian securities regulatory authorities at www.sedar.com. All forward-looking information herein is qualified in its entirety by this
cautionary statement, and Copper Fox disclaims any obligation to revise or update any such forward-looking information or to
publicly announce the result of any revisions to any of the forward-looking information contained herein to reflect future results,
events or developments, except as required by law.
PDF available: http://resource.globenewswire.com/Resource/Download/85bfd6fa-6765-46d2-bd57-ca8f2933b94a
![CF Metals_logo_RGB.jpg](https://resource.globenewswire.com/media/63ab538a-c598-4cfd-a571-2e2169bb99dd/small/cf-metals-logo-rgb-jpg.jpg)
![](http://www.globenewswire.com/newsroom/ti?ndecode=NzA2NDAjNzQzNDcxNA==)