CALGARY, Alberta, Dec. 19, 2018 (GLOBE NEWSWIRE) -- Copper Fox Metals Inc. (“Copper Fox” or the
“Company”) (TSX-V: CUU – OTC-Pink: CPFXF) and its wholly owned subsidiary, Desert Fox Copper Inc., are pleased to provide
the final analytical results for the recently completed mapping and sampling program on its 100% owned Mineral Mountain copper
project located approximately 15 miles east of Florence, Arizona.
Highlights:
- Copper mineralization has been traced in outcrop over a horizontal distance of 4,500m by up to 2,000m wide.
- Within the copper mineralized area, two large areas of coincident molybdenum mineralization have been
outlined.
- Sampling in Area 1 has returned copper concentrations of up to 10.38% copper and 0.015% molybdenum hosted in
Laramide age Quartz Monzonite.
- Sampling in Area 3 has returned copper concentrations of up to 9.52% copper and 0.022% molybdenum hosted in
Laramide age Quartz Monzonite.
- The high copper grades in samples are due to abundant chalcocite.
Elmer B. Stewart, President and CEO of Copper Fox, stated, “The sampling program has partially outlined a large
Laramide age porphyry copper system at Mineral Mountain. The secondary copper minerals and trace element geochemistry
combined with abundant mineralized outcrop containing chalcocite support the presence of a Leach Cap; a feature typically located
above porphyry deposits in arid and semi-arid climates. The occurrence of disseminated, fracture and quartz vein hosted
copper mineralization, abundance of chalcocite, coincident copper-molybdenum mineralization and mineralized porphyritic intrusive
phases suggest that at the current level of erosion, the interpreted sulphide copper-molybdenum portion of the porphyry system is
closer to surface than previously interpreted. Compilation of the data is underway, the results of which will be used to
determine the exploration activities required to advance the project to the drill stage.”
Geological Model:
The secondary copper minerals, trace element geochemistry and abundance of chalcocite at Mineral Mountain represents the weathered
surface of porphyry copper style mineralization (a “Leach Cap”). Porphyry copper deposits in climates like Arizona typically
exhibit a Leach Cap on surface, underlain by high grade copper mineralization referred to as a “chalcocite blanket”, due to
supergene enrichment followed by sulphide copper mineralization at depth. Copper and molybdenum are the primary metals in
Laramide age porphyry deposits in Arizona.
Analytical Results:
The mapping and sampling program consisted of mapping lithologies, alterations, and vein assemblages. Selected rock chip
samples were collected from mineralized outcrops to characterize the metals and trace element geochemistry present in veins, other
mineralized structures and the outcrop. The samples are not necessarily representative of the mineralization on the property.
Non-mineralized outcrops were also sampled to determine background concentration of various elements. Outcrop exposures
within the areas sampled during this phase of the program are estimated to range between 2-5%. The average metal
concentrations for the new analytical results are tabulated below and do not include previously announced results discussed in the
November 21, and November 29, 2018 news releases (see tables below for individual sample results).
|
|
Average Concentration |
Area |
# of samples |
Cu (ppm) |
Cu (%) |
Mo (ppm) |
Au (ppb) |
Ag
(ppm) |
1 |
28 |
11,855 |
1.185 |
20.8 |
194 |
8.36 |
3 |
46 |
7,692 |
0.769 |
18.4 |
123 |
2.05 |
|
|
|
|
|
|
|
Cu = copper, Mo = molybdenum, Au = gold, Ag =silver, (%) = percent, ppm = parts per million,
ppb = parts per billion
Area #1:
The copper mineralization hosted in Laramide age Quartz Monzonite has been extended approximately 400m to the north, 700m to the
east and to the south into Area #3. The sampling program shows that Area #1 and Area #3 have merged into a single mineralized
area. The analytical results for samples from Area #1 are shown below:
Sample ID |
Cu (ppm) |
Cu (%) |
Mo (ppm) |
Au (ppb) |
Ag (ppm) |
Sample ID |
Cu (ppm) |
Cu (%) |
Mo (ppm) |
Au (ppb) |
Ag (ppm) |
MM-456 |
3,050 |
0.305 |
0.5 |
46 |
2.3 |
MM-501 |
4,330 |
0.433 |
5.5 |
29 |
0.2 |
MM-472 |
654 |
0.065 |
1.6 |
5 |
0.2 |
MM-502 |
15,700 |
1.570 |
11.9 |
15 |
1.7 |
MM-473 |
13,400 |
1.340 |
34.4 |
1844 |
23.2 |
MM-503 |
6,600 |
0.660 |
18.5 |
24 |
0.5 |
MM-474 |
1,210 |
0.121 |
2.1 |
18 |
0.3 |
MM-504 |
36,600 |
3.660 |
41 |
46 |
3.3 |
MM-475 |
9,080 |
0.908 |
3.3 |
42 |
2 |
MM-505 |
17,500 |
1.750 |
37.1 |
37 |
1.3 |
MM-476 |
392 |
0.039 |
2 |
<5 |
0.3 |
MM-494 |
5,630 |
0.563 |
5 |
40 |
1.7 |
MM-477 |
2,520 |
0.252 |
0.6 |
18 |
0.4 |
MM-495 |
103,800 |
10.380 |
147 |
263 |
37.3 |
MM-478 |
14,200 |
1.420 |
68.8 |
40 |
21.9 |
MM-496 |
997 |
0.100 |
25.4 |
41 |
0.6 |
MM-479 |
13,900 |
1.390 |
4.1 |
91 |
63.5 |
MM-418 |
1,280 |
0.128 |
1.2 |
5 |
1 |
MM-480 |
5,770 |
0.577 |
3.4 |
6 |
15.9 |
MM-419 |
6,980 |
0.698 |
3.5 |
12 |
3.9 |
MM-481 |
6,730 |
0.673 |
23.2 |
14 |
6.7 |
MM-425 |
1,700 |
0.170 |
3.3 |
14 |
1.1 |
MM-482 |
10,400 |
1.040 |
117 |
1661 |
9.7 |
MM-426 |
22,000 |
2.200 |
4.5 |
352 |
16.2 |
MM-491 |
13,500 |
1.350 |
2.3 |
49 |
14.7 |
MM-427 |
7,850 |
0.785 |
8.3 |
294 |
2.7 |
MM-500 |
1,960 |
0.196 |
6.1 |
23 |
0.3 |
MM-428 |
4,210 |
0.421 |
1.2 |
212 |
1.4 |
|
|
|
|
|
|
|
|
|
|
|
|
Cu = copper, Mo = molybdenum, Au = gold, Ag =silver, (%) = percent, ppm = parts per million,
ppb = parts per billion
Area #3:
The copper mineralization has been extended to the north into Area #1. The mapping and prospecting indicates that the
mineralization remains open to the south. Analytical results for samples from Area #3 are shown below:
Sample ID |
Cu (ppm) |
Cu (%) |
Mo (ppm) |
Au (ppb) |
Ag (ppm) |
Sample ID |
Cu (ppm) |
Cu (%) |
Mo (ppm) |
Au (ppb) |
Ag (ppm) |
MM-447 |
2,070 |
0.207 |
1.1 |
9 |
2 |
MM-442 |
472 |
0.047 |
2.3 |
<5 |
5.6 |
MM-448 |
1,980 |
0.198 |
11.2 |
10 |
3.4 |
MM-443 |
2,050 |
0.205 |
16.4 |
41 |
19 |
MM-449 |
963 |
0.096 |
2.9 |
331 |
2.1 |
MM-444 |
3,340 |
0.334 |
4.4 |
67 |
1.6 |
MM-450 |
591 |
0.059 |
0.7 |
14 |
1.2 |
MM-446 |
13,500 |
1.350 |
88.2 |
455 |
1.6 |
MM-451 |
16,300 |
1.630 |
38.2 |
43 |
15.4 |
MM-468 |
12,000 |
1.200 |
22.4 |
1764 |
3.3 |
MM-452 |
22,700 |
2.270 |
40.8 |
55 |
65.4 |
MM-469 |
185 |
0.019 |
0.8 |
13 |
19.6 |
MM-453 |
9,120 |
0.912 |
2.7 |
9 |
4.6 |
MM-470 |
2,300 |
0.230 |
9 |
17 |
1.2 |
MM-454 |
3,880 |
0.388 |
9 |
11 |
3.5 |
MM-471 |
545 |
0.055 |
2.8 |
<5 |
0.7 |
MM-455 |
555 |
0.055 |
1.9 |
<5 |
0.7 |
MM-483 |
1,570 |
0.157 |
84.7 |
68 |
1.9 |
MM-435 |
1,230 |
0.123 |
0.5 |
<5 |
0.8 |
MM-497 |
5,320 |
0.532 |
3 |
<5 |
1.4 |
MM-439 |
6,220 |
0.622 |
48.1 |
20 |
4.1 |
MM-498 |
12,500 |
1.250 |
1.4 |
12 |
6.2 |
MM-457 |
2,040 |
0.204 |
10 |
8 |
0.4 |
MM-492 |
2,730 |
0.273 |
10.7 |
83 |
38.7 |
MM-458 |
9,830 |
0.983 |
7.7 |
465 |
2.3 |
MM-493 |
128 |
0.013 |
1 |
<5 |
1.6 |
MM-459 |
2.67 |
0.267 |
4.2 |
11 |
19.6 |
MM-430 |
67,000 |
6.700 |
32.6 |
9 |
94.8 |
MM-460 |
1.39 |
0.139 |
7.4 |
8 |
0.2 |
MM-424 |
1,990 |
0.199 |
1.2 |
<5 |
1.1 |
MM-461 |
1,210 |
0.121 |
0.6 |
<5 |
3.2 |
MM-431 |
5,220 |
0.522 |
11.2 |
5 |
3.1 |
MM-462 |
10,400 |
1.040 |
12.5 |
<5 |
13.2 |
MM-432 |
762 |
0.076 |
4.3 |
<5 |
0.7 |
MM-463 |
805 |
0.081 |
1.6 |
<5 |
0.7 |
MM-433 |
3,260 |
0.326 |
0.9 |
113 |
1.7 |
MM-464 |
95,200 |
9.520 |
222 |
36 |
120.8 |
MM-434 |
1,080 |
0.108 |
0.6 |
25 |
0.6 |
MM-465 |
1,510 |
0.151 |
1.1 |
<5 |
2.8 |
MM-420 |
334 |
0.033 |
0.8 |
5 |
0.7 |
MM-466 |
1,890 |
0.189 |
14.4 |
68 |
1.3 |
MM-421 |
18,600 |
1.860 |
99.4 |
19 |
9.4 |
MM-467 |
73.7 |
0.007 |
0.7 |
<5 |
0.2 |
MM-422 |
274 |
0.027 |
2.6 |
<5 |
0.3 |
MM-441 |
3,750 |
0.375 |
4.8 |
20 |
1 |
MM-429 |
2,310 |
0.231 |
3.7 |
116 |
21.9 |
|
|
|
|
|
|
|
|
|
|
|
|
Cu = copper, Mo = molybdenum, Au = gold, Ag =silver, (%) = percent, ppm = parts per million, ppb = parts per
billion
Mineralization:
The copper mineralization occurs in quartz veins, veinlets and sheeted quartz veins as malachite-chalcocite and chalcocite veins
and veinlets (of variable thickness), on fractures and as disseminations in potassic and phyllic altered Laramide age Quartz
Monzonite and porphyritic intrusives (containing 15-30% phenocrysts). The main copper minerals are malachite, chrysocolla and
chalcocite with minor azurite, native copper and rare chalcopyrite. Gangue minerals include goethite after pyrite and
jarosite.
Analytical and Sampling Procedures:
Outcrop sampling as well as mapping lithologies, alterations, and styles of mineralization were completed. Selected rock chip
samples were collected from outcrop to characterize the base metals and trace element geochemistry present in veins, other
mineralized structures and outcrops. Outcrop exposures within the areas sampled during the last phase of the program are
estimated to be between 2-5%. The samples were picked up from site by Skyline Laboratories of Tucson, Arizona.
Samples were crushed to plus 75% -10 mesh, split and pulverized to plus 95% -150 mesh. Pulps were
subjected to a multi-acid digest (HNO3, HF, and HClO4). Gold was analyzed on a 30-gram charge by fire assay
(FA-01) with an atomic absorption finish. Skyline’s package code TE-5 was used to analyze the samples for the base and other
trace elements. Metal concentration in samples exceeding the upper limit of detection were assayed for copper using (MEA) and
silver (FA-04). Skyline has an ISO/IEC 17025/2005 accreditation.
Quality Control:
A total of 1 certified blank and 4 certified reference standards were inserted (insertion rate 1:15) with the sample for which
analyses are being reported. QA/QC shows that the blank and standards were within +/-5% of accepted value for the blank and
standards.
Elmer B. Stewart, MSc. P. Geol., President and CEO of Copper Fox, is the Company’s non-independent, nominated
Qualified Person pursuant to National Instrument 43-101, Standards for Disclosure for Mineral Projects, and has reviewed and
approves the scientific and technical information disclosed in this news release.
About Copper Fox:
Copper Fox is a Tier 1 Canadian resource company listed on the TSX Venture Exchange (TSX-V: CUU) focused on copper
exploration and development in Canada and the United States. The principal assets of Copper Fox and its wholly owned Canadian
and United States subsidiaries, being Northern Fox Copper Inc. and Desert Fox Copper Inc., are the 25% interest in the Schaft Creek
Joint Venture with Teck Resources Limited on the Schaft Creek copper-gold-molybdenum-silver project located in northwestern British
Columbia and a 100% ownership of the Van Dyke oxide copper project located in Miami, Arizona. For more information on Copper
Fox’s other mineral properties and investments visit the Company’s website at http://www.copperfoxmetals.com.
On behalf of the Board of Directors
Elmer B. Stewart
President and Chief Executive Officer
For additional information contact:
Lynn Ball: investor@copperfoxmetals.com
(844) 484-2820 or (403) 264-2820
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note Regarding Forward-Looking Information
This news release contains forward-looking statements within the meaning of the Section 27A of the Securities Act of 1933 and
Section 21E of the Securities Exchange Act of 1934, and forward-looking information within the meaning of the Canadian securities
laws (collectively, “forward-looking information”). Forward-looking information is generally identifiable by use of the words
“believes,” “may,” “plans,” “will,” “anticipates,” “intends,” “budgets”, “could”, “estimates”, “expects”, “forecasts”, “projects”
and similar expressions, and the negative of such expressions. Forward-looking information in this news release includes
statements regarding: copper mineralization being traced in outcrop over a horizontal distance of 4,500m by up to 2,000m
wide; two large areas of coincident copper-molybdenum mineralization; copper concentrations of up to 10.38% copper and 0.015%
molybdenum in Area #1; copper concentrations of up to 9.52% copper and 0.022% molybdenum in Area #3; the high copper grades in
samples being due to abundant chalcocite; using the sampling program data results to determine the exploration activities required
to advance the project to the drill stage; and the approximate dimensions of the mineralized zones and average concentrations of
the metals for the areas.
In connection with the forward-looking information contained in this news release, Copper Fox and its
subsidiaries have made numerous assumptions regarding, among other things: the geological advice that Copper Fox has received is
reliable and is based upon practices and methodologies which are consistent with industry standards and the reliability of
historical reports. While Copper Fox considers these assumptions to be reasonable, these assumptions are inherently subject
to significant uncertainties and contingencies.
Additionally, there are known and unknown risk factors which could cause Copper Fox’s actual results,
performance or achievements to be materially different from any future results, performance or achievements expressed or implied by
the forward-looking information contained herein. Known risk factors include, among others: the dimensions and shape of the
mineralized areas may not be as estimated; the surface mineralization may not represent buried porphyry style mineralization;
uncertainties relating to interpretation of the outcrop sampling results; the geology, continuity and concentration of the
mineralization; the financial markets and the overall economy may deteriorate; the need to obtain additional financing and
uncertainty of meeting anticipated program milestones; uncertainty as to timely availability of permits and other governmental
approvals.
A more complete discussion of the risks and uncertainties facing Copper Fox is disclosed in Copper Fox's
continuous disclosure filings with Canadian securities regulatory authorities at www.sedar.com. All forward-looking information herein is qualified in its entirety by this
cautionary statement, and Copper Fox disclaims any obligation to revise or update any such forward-looking information or to
publicly announce the result of any revisions to any of the forward-looking information contained herein to reflect future results,
events or developments, except as required by law.
PDF available: http://resource.globenewswire.com/Resource/Download/ba2872cc-4765-4f54-a07c-d5843fa338f2
![CF Metals_logo_RGB.jpg](https://resource.globenewswire.com/media/63ab538a-c598-4cfd-a571-2e2169bb99dd/small/cf-metals-logo-rgb-jpg.jpg)
![](http://www.globenewswire.com/newsroom/ti?ndecode=NzA2NDAjNzQ2ODA5Nw==)