News Press Releases

/C O R R E C T I O N from source -- Patriot Battery Metals Inc/

T.PMET | November 23, 2023

In the news release, Patriot Makes New Discovery at the Corvette Property as it Intercepts 100 m of Spodumene-Bearing Pegmatite at CV9, Quebec, Canada, issued 21-Nov-2023 by Patriot Battery Metals Inc over Newswire, we are advised by the company that the release includes a summary table of additional information (Table A) to intervals visually observed. Table A includes an estimation of the relative abundance of spodumene content present within the drillholes. This visual percentage estimate of spodumene was requested by the ASX, to comply with ASX specific regulations, and is provided to satisfy ASX listing requirements. However, visual estimates are subjective and, in this instance, the intent was to identify the presence of spodumene, not the grade. The company will provide details of grade when they become available. The amended announcement follows:

Patriot Makes New Discovery at the Corvette Property as it Intercepts 100 m of Spodumene-Bearing Pegmatite at CV9, Quebec, Canada

VANCOUVER, BC, Nov. 22, 2023 /PRNewswire/ -November 23, 2023 – SYDNEY, Australia

Highlights

Drill hole CV23-345 hits approximately100 m of near-continuous spodumene-bearing pegmatite at CV9.
Three (3) drill holes have returned continuous pegmatite intersections of 60+ m.
Patriot has defined a pegmatite strike length of approximately 450 m by drilling and outcrop at CV9, which remains open.
CV9 is located approximately 14 km west of the CV5 mineral resource.
Preliminary geological modelling indicates the CV9 Pegmatite significantly thickens to at least 80 m width at one location and remains open in multiple directions.
The magnitude of this variably mineralized pegmatite blow-out is significant, sharing similarities to those present at the CV5 Pegmatite in terms of depth and scale.
Eighteen (18) core holes (~4,000 m) have been completed in the inaugural drill program at the CV9 Pegmatite – sample assays are pending.
While it is early stage, the work done to date has resulted in an improvement in the understanding of the CV9 Pegmatite as the program went on, with a number of high priority targets now identified.

Darren L. Smith, Company Vice President of Exploration, comments: "This is a very strong start to the drill exploration at the CV9 Pegmatite. Although no core assays have been received yet, the presence of spodumene and the length of pegmatite encountered in multiple holes, highlighted by an approximate 100 m near-continuous spodumene-bearing hit in the final hole of the program, are very positive in terms of potential of this pegmatite to hold significant scale."

Patriot Battery Metals Inc. (the "Company" or "Patriot") (TSXV: PMET) (ASX: PMT) (OTCQX: PMETF) (FSE: R9GA) is pleased to announce preliminary results of its inaugural drill program at the CV9 Spodumene Pegmatite at its wholly owned Corvette Property (the "Property" or "Project"), located in the Eeyou Istchee James Bay region of Quebec. The CV9 Spodumene Pegmatite is located approximately 14 km west of the CV5 Spodumene Pegmatite (109.2 Mt at 1.42% Li2O inferred1), 9.5 km west-northwest of the CV13 Spodumene Pegmatite, and 11 km south of the Trans-Taiga Road and powerline infrastructure.

A total of eighteen (18) holes, for approximately 4,000 m of NQ coring, were completed this summer-fall in the inaugural drill program at the CV9 Spodumene Pegmatite (Figure 1 and Figure 2). The Company is pleased to report that wide intervals of pegmatite, dominantly spodumene-bearing, have been returned from multiple drill holes at CV9, including:

100 m in drill hole CV23-345 (includes ~1 m of non-pegmatite dilution),
76 m in drill hole CV23-315,
70 m and 27 m in drill hole CV23-333,
37 m in drill hole CV23-326, and
23 m in drill hole CV23-304

Table A: Spodumene-bearing pegmatite with respect to intervals for drill holes CV23-304, 315, 326, 333, and 345 as listed above.

Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic interest. Visual estimates also potentially provide no information regarding impurities or deleterious physical properties relevant to valuations. The pegmatite drill logs for all eighteen (18) holes will be formally and fully logged over the next two weeks and core sample assays for the entire pegmatite interval are anticipated to be received from the lab, and reported by the Company, in late Q1 2024.

Although the Company does not comment on the grade of the pegmatite intervals reported, several drill holes are noted as having pegmatite intervals that are spodumene-bearing based on preliminary geological logging. Readers are cautioned that the potential content and quantities of spodumene are conceptual in nature; there has been insufficient exploration by the Company or its qualified person at the Property to define a mineral resource; and it is uncertain whether further exploration will result in these targets being delineated as a mineral resource. Spodumene-bearing pegmatite refers to the visually identified presence of the mineral spodumene at a minimum trace level (i.e., 0.1 to 5%), within the respective interval, which occurs as discrete mineral crystals of varying size, abundance, and orientation hosted within a quartz-feldspar pegmatite with accessory muscovite and occasional tourmaline. For the relevant drill holes, the abundance of spodumene may vary widely over the interval and, where present, has been preliminarily logged at a trace level or higher. However, the Company notes these are preliminary logs, which are primarily used for an initial assessment of the drill hole to guide the immediate future drill targetting. Preliminary estimates of spodumene content may change on final logging; however, the determination as to the presence of spodumene within an interval is unlikely to change. The Company makes no assertions as to spodumene contents beyond spodumene being identified as present within the interval (i.e., greater than 0.1 – 5%) and therefore should not be relied upon as an indication of grade. The presence of spodumene is a determining factor in indicating if the pegmatite is spodumene-bearing and, in turn, its presence is a positive indicator of potential for the CV9 Pegmatite target.

Preliminary logs for all pegmatite drill intercepts >2 m are presented in Table 1, and drill hole attributes in Table 2. Drill core from holes completed at the CV9 Pegmatite is currently being processed at site and no core sample assays have been received yet.

A primary objective of the inaugural drill program at CV9 was to determine the geometry and orientation of the pegmatite system. Therefore, drill holes were completed at a variety of orientations from multiple collar locations (Figure 1) with results consistently improving over the course of the program as understanding of the pegmatite geometry improved. The last eight (8) holes all returned continuous core-length pegmatite intercepts >10 m, including three (3) intersections of 60+ m (see Figure 1 and Table 1).

The CV9 Pegmatite is currently interpreted to be a single principal dyke, which outcrops at surface, has a steep northerly dip, and is moderately plunging to the east-southeast. A strike length of approximately 450 mhas been defined to date by drilling and outcrop, which remains open (Figure 1). The width of the dyke is variable; however, preliminary geological modelling indicates the CV9 Pegmatite significantly thickens to at least 80 m width at one location and remains open in multiple directions. The thickening is delineated by three (3), wide, variably mineralized spodumene-bearing pegmatite intersections at different orientations – 70 m (CV23-333), 76 m (CV23-315), and 100 m (CV23–345), all core length. The magnitude of this variably mineralized pegmatite blow-out is significant, sharing similarities to those present at the CV5 Pegmatite in terms of depth and scale. This is a very positive observation for this early phase of drill exploration at the CV9 Pegmatite and suggests a strong potential for significant scale to be present.

The Company will refine the geological model for CV9 upon the receipt of assays and a follow-up drill program will be developed to expand upon the success discussed herein.

The 2023 summer-fall program included the inaugural drill testing of the CV9 Spodumene Pegmatite, in addition to the continued drill delineation of the CV5 and CV13 spodumene pegmatites. Core sample assays remain to be announced for more than 140 drill holes completed over the program, including all 18 holes completed at CV9. Assays for CV9 drill core samples are not expected to be received (and reported) until Q1 2024.

Core processing is continuing at site with drilling temporarily paused for the onset of winter; drilling will resume in early January with a ramp up to ten (10) drill rigs. Core samples from a large number of drill holes have now arrived at the laboratory with processing underway, and shipments are now back to their regular weekly schedule. Results are anticipated to be reported in batches per pegmatite (CV5, CV13, and CV9) as received.

1 The CV5 mineral resource estimate (109.2 Mt at 1.42% Li2O and 160 ppm Ta2O5 inferred) is reported at a cut-off grade of 0.40% Li2O with effective date of June 25, 2023 (through drill hole CV23-190). Mineral resources are not mineral reserves as they do not have demonstrated economic viability.

Although the Company does not comment on the grade of the pegmatite intervals reported, several are noted as spodumene-bearing based on preliminary geological logging. Spodumene-bearing pegmatite refers to the visually identified presence of the mineral spodumene, within the respective interval, as discrete mineral crystals of varying size and orientation hosted within a quartz-feldspar pegmatite. Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic interest. Visual estimates also potentially provide no information regarding impurities or deleterious physical properties relevant to valuations.

About the CV Lithium Trend

The CV Lithium Trend is an emerging spodumene pegmatite district discovered by the Company in 2017 and is interpreted to span more than 50 kilometres across the Corvette Property. The core area includes the approximate 4.35 km long CV5 Spodumene Pegmatite, which hosts a maiden mineral resource estimate of 109.2 Mt at 1.42% Li2O inferred1.

To date, seven (7) distinct clusters of lithium pegmatite have been discovered across the Corvette Property – CV4, CV5, CV8, CV9, CV10, CV12, and CV13. Given the proximity of some pegmatite outcrops to each other, as well as the shallow till cover in the area, it is probable that some of the outcrops may reflect a discontinuous surface exposure of a single, larger pegmatite "outcrop" subsurface. Further, the high number of well-mineralized pegmatites along the trend indicate a strong potential for a series of relatively closely spaced/stacked, sub-parallel, and sizable spodumene-bearing pegmatite bodies, with significant lateral and depth extent, to be present.

Qualified/Competent Person

The information in this news release that relates to exploration results for the Corvette Property is based on, and fairly represents, information compiled by Mr. Darren L. Smith, M.Sc., P.Geo., who is a Qualified Person as defined by National Instrument 43-101, and member in good standing with the Ordre des Géologues du Québec (Geologist Permit number 01968), and with the Association of Professional Engineers and Geoscientists of Alberta (member number 87868). Mr. Smith has reviewed and approved the technical information in this news release.

Mr. Smith is Vice President of Exploration for Patriot Battery Metals Inc. and holds common shares and options in the Company.

Mr. Smith has sufficient experience, which is relevant to the style of mineralization, type of deposit under consideration, and to the activities being undertaken to qualify as a Competent Person as described by the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (the JORC Code). Mr. Smith consents to the inclusion in this news release of the matters based on his information in the form and context in which it appears.

About Patriot Battery Metals Inc.

Patriot Battery Metals Inc. is a hard-rock lithium exploration company focused on advancing its district-scale 100% owned Corvette Property located in the Eeyou Istchee James Bay region of Quebec, Canada, and proximal to regional road and powerline infrastructure. The Corvette Property hosts the CV5 Spodumene Pegmatite with a maiden mineral resource estimate of 109.2 Mt at 1.42% Li2O inferred1 and ranks as the largest lithium pegmatite resource in the Americas based on contained lithium carbonate equivalent (LCE), and one of the top 10 largest lithium pegmatite resources in the world. Additionally, the Corvette Property hosts multiple other spodumene pegmatite clusters that remain to be drill tested, as well as more than 20 km of prospective trend that remain to be assessed.

1 The CV5 mineral resource estimate (109.2 Mt at 1.42% Li2O and 160 ppm Ta2O5 inferred) is reported at a cut-off grade of 0.40% Li2O with effective date of June 25, 2023 (through drill hole CV23-190). Mineral resources are not mineral reserves as they do not have demonstrated economic viability.

For further information, please contact us at info@patriotbatterymetals.com or by calling +1 (604) 279-8709, or visit www.patriotbatterymetals.com. Please also refer to the Company's continuous disclosure filings, available under its profile at www.sedarplus.ca and www.asx.com.au, for available exploration data.

This news release has been approved by the Board of Directors.

"BLAIR WAY"

Blair Way, President, CEO, & Director

Disclaimer for Forward-looking Information

This news release contains "forward-looking information" or "forward-looking statements" within the meaning of applicable securities laws and other statements that are not historical facts. Forward-looking statements are included to provide information about management's current expectations and plans that allows investors and others to have a better understanding of the Company's business plans and financial performance and condition.

All statements, other than statements of historical fact included in this news release, regarding the Company's strategy, future operations, financial position, prospects, plans and objectives of management are forward-looking statements that involve risks and uncertainties. Forward-looking statements are typically identified by words such as "plan", "expect", "estimate", "intend", "anticipate", "believe", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved. In particular and without limitation, this news release contains forward-looking statements pertaining to the summer-fall drilling program and the completion and publication of Company's technical report comprising the maiden mineral resource estimate in respect of the Corvette Property.

Forward-looking information is based upon certain assumptions and other important factors that, if untrue, could cause the actual results, performance or achievements of the Company to be materially different from future results, performance or achievements expressed or implied by such information or statements. There can be no assurance that such information or statements will prove to be accurate. Key assumptions upon which the Company's forward-looking information is based include the total funding required to complete the development of the Company's lithium mineral project at the Corvette Property (the "Corvette Project"), including the drilling program.

Readers are cautioned that the foregoing list is not exhaustive of all factors and assumptions which may have been used. Forward-looking statements are also subject to risks and uncertainties facing the Company's business, any of which could have a material adverse effect on the Company's business, financial condition, results of operations and growth prospects. Some of the risks the Company faces and the uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements include, among others, the ability to execute on plans relating to the Company's Corvette Project, including the timing thereof. In addition, readers are directed to carefully review the detailed risk discussion in the Company's most recent Annual Information Form filed on SEDAR+, which discussion is incorporated by reference in this news release, for a fuller understanding of the risks and uncertainties that affect the Company's business and operations.

Although the Company believes its expectations are based upon reasonable assumptions and has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. As such, these risks are not exhaustive; however, they should be considered carefully. If any of these risks or uncertainties materialize, actual results may vary materially from those anticipated in the forward-looking statements found herein. Due to the risks, uncertainties and assumptions inherent in forward-looking statements, readers should not place undue reliance on forward-looking statements.

Forward-looking statements contained herein are presented for the purpose of assisting investors in understanding the Company's business plans, financial performance and condition and may not be appropriate for other purposes.

The forward-looking statements contained herein are made only as of the date hereof. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except to the extent required by applicable law. The Company qualifies all of its forward-looking statements by these cautionary statements.

Competent Person Statement (ASX Listing Rule 5.22)

The mineral resource estimate in this release was reported by the Company in accordance with ASX Listing Rule 5.8 on July 31, 2023. The Company confirms it is not aware of any new information or data that materially affects the information included in the previous announcements and that all material assumptions and technical parameters underpinning the estimates in the previous announcements continue to apply and have not materially changed.

Appendix 1 – JORC Code 2012 Table 1 information required by ASX Listing Rule 5.7.1

Section 1 – Sampling Techniques and Data

Criteria

JORC Code explanation

Commentary

Sampling
techniques

Nature and quality of sampling (eg cut
channels, random chips, or specific
specialized industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc). These examples
should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of
mineralization that are Material to the
Public Report.
In cases where 'industry standard' work
has been done this would be relatively
simple (eg 'reverse circulation drilling
was used to obtain 1 m samples from
which 3 kg was pulverized to produce a
30 g charge for fire assay'). In other
cases more explanation may be
required, such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities or
mineralization types (eg submarine
nodules) may warrant disclosure of
detailed information.

Core sampling protocols meet industry standard
practices.
Core sampling is guided by lithology as determined
during geological logging (i.e., by a geologist). All
pegmatite intervals are sampled in their entirety (half-
core), regardless if spodumene mineralization is noted
or not (in order to ensure an unbiased sampling
approach) in addition to ~1 to 3 m of sampling into the
adjacent host rock (dependent on pegmatite interval
length) to "bookend" the sampled pegmatite.
The minimum individual sample length is typically 0.3-
0.5 m and the maximum sample length is typically
2.0 m. Targeted individual pegmatite sample lengths
are 1.0 m.
All drill core is oriented to maximum foliation prior to
logging and sampling and is cut with a core saw into
half-core pieces, with one half-core collected for assay,
and the other half-core remaining in the box for
reference.
Core samples collected from drill holes were shipped to
SGS Canada's laboratory in Val-d'Or, QC, for sample
preparation (code PRP89 special) which included
drying at 105°C, crush to 90% passing 2 mm, riffle split
250 g, and pulverize 85% passing 75 microns. Core
sample pulps were shipped by air to SGS Canada's
laboratory in Burnaby, BC, where the samples were
homogenized and subsequently analyzed for multi-
element (including Li and Ta) using sodium peroxide
fusion with ICP-AES/MS finish (codes GE_ICP91A50
and GE_IMS91A50).

Drilling techniques

Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details
(eg core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit or other type, whether core
is oriented and if so, by what method,
etc).

NQ size core diamond drilling was completed for all holes. Core was not oriented.

Drill sample recovery

Method of recording and assessing core
and chip sample recoveries and results
assessed.
Measures taken to maximize sample
recovery and ensure representative
nature of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.

All drill core was geotechnically logged following
industry standard practices, and includes TCR, RQD,
ISRM, and Q-Method. Core recovery is very good and
typically exceeds 90%.

Logging

Whether core and chip samples have been
geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevant intersections logged.

Upon receipt at the core shack, all drill core is pieced
together, oriented to maximum foliation, metre marked,
geotechnically logged (including structure), alteration
logged, geologically logged, and sample logged on an
individual sample basis. Core box photos are also
collected of all core drilled, regardless of perceived
mineralization. Specific gravity measurements of
pegmatite are also collected at systematic intervals for
all pegmatite drill core using the water immersion
method, as well as select host rock drill core.
The logging is qualitative by nature, and includes
estimates of spodumene grain size, inclusions, and
model mineral estimates.
These logging practices meet or exceed current industry
standard practices.

Sub-sampling
techniques and
sample preparation

If core, whether cut or sawn and
whether quarter, half or all core taken.
If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
Quality control procedures adopted for
all sub-sampling stages to maximize
representivity of samples.
Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for
instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to
the grain size of the material being
sampled.

· N/A, no assay data presented.

Quality of assay
data and laboratory
tests

The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (ie lack of bias) and precision
have been established.

N/A, no assay data presented.

Verification of
sampling and
assaying

The verification of significant
intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data,
data entry procedures, data verification, data
storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.

Intervals are reviewed and compiled by the VP
Exploration and Project Managers prior to disclosure,
including a review of the Company's internal QAQC
sample analytical data.
Data capture utilizes MX Deposit software whereby
core logging data is entered directly into the software
for storage, including direct import of laboratory
analytical certificates as they are received. The
Company employs various on-site and post QAQC
protocols to ensure data integrity and accuracy.

Location of data
points

Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral
Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic
control.

Each drill hole's collar has been surveyed with a RTK
Trimble Zephyr 3 (or temporarily using a handheld
GPS).
The coordinate system used is UTM NAD83 Zone 18.
The Company completed a property-wide LiDAR and
orthophoto survey in August 2022, which provides
high-quality topographic control.
The quality and accuracy of the topographic controls
are considered adequate for advanced stage exploration
and development, including mineral resource
estimation.

Data spacing and
distribution

Data spacing for reporting of
Exploration Results.
Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications
applied.
Whether sample compositing has been
applied.

Drill hole collar spacing is irregular with varied hole
orientations and multiple collars on the same pad.
It is interpreted that some of the drill hole spacing may
be sufficient to support a mineral resource estimate.
Core sample lengths typically range from 0.5 to 1.5 m
and average ~1 m. Sampling is continuous within all
pegmatite encountered in the drill hole.

Orientation of data
in relation to
geological structure

Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this
is known, considering the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralized structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.

No sampling bias is anticipated based on structure
within the mineralized body.
At CV9, the orientation and geometry of the pegmatite
is still being delineated. The pegmatite is currently
interpreted to be comprised of a single principal dyke,
which outcrops at surface, has a steep northerly dip, and
is moderately plunging to the east-southeast True width
of drill intersections is not known.

Sample security

The measures taken to ensure sample
security.

N/A, no assay data presented.

Audits or reviews

The results of any audits or reviews of
sampling techniques and data.

A review of the sample procedures for the Company's
2021 fall drill program (CF21-001 to 004) and 2022
winter drill program (CV22-015 to 034) was completed
by an Independent Competent Person and deemed
adequate and acceptable to industry best practices
(discussed in a technical report titled "NI 43-101
Technical Report on the Corvette Property, Quebec,
Canada", by Alex Knox, M.Sc., P.Geol., Issue Date of
June 27th, 2022.)
A review of the sample procedures through the
Company's 2023 winter drill program was completed
by an independent Competent Person with respect to the
CV5 Pegmatite's maiden mineral resource estimate and
deemed adequate and acceptable to industry best
practices (discussed in a technical report titled " NI
43–101 Technical Report, Mineral Resource Estimate
for the CV5 Pegmatite, Corvette Property" by Todd
McCracken, P.Geo., of BBA Engineering Ltd., and
Ryan Cunningham, M.Eng., P.Eng., of Primero Group
Americas Inc., Effective Date of June 25, 2023, and
Issue Date of September 8, 2023.
Additionally, the Company continually reviews and
evaluates its procedures in order to optimize and ensure
compliance at all levels of sample data collection and
handling.

Section 2 – Reporting of Exploration Results

Criteria

JORC Code explanation

Commentary

Mineral tenement
and land tenure
status

Type, reference name/number, location
and ownership including agreements or
material issues with third parties such as
joint ventures, partnerships, overriding
royalties, native title interests, historical
sites, wilderness or national park and
environmental settings.
The security of the tenure held at the time
of reporting along with any known
impediments to obtaining a licence to
operate in the area.

The Corvette Property is comprised of 424 CDC claims
located in the James Bay Region of Quebec, with
Patriot Battery Metals Inc. the registered title holder for all
of the claims. The northern border of the Property's
primary claim block is located within approximately 6
km to the south of the Trans-Taiga Road and powerline
infrastructure corridor. At the Property, The CV9
Spodumene Pegmatite is located approximately 14
km west of the CV5 Spodumene Pegmatite, 9.5 km west-
northwest of the CV13 Spodumene Pegmatite, and
11 km south of the Trans-Taiga Road and powerline
infrastructure.
The Company holds 100% interest in the Property
subject to various royalty obligations depending on
original acquisition agreements. DG Resources
Management holds a 2% NSR (no buyback) on 76
claims, D.B.A. Canadian Mining House holds a 2%
NSR on 50 claims (half buyback for $2M) and Osisko
Gold Royalties holds a sliding scale NSR of 1.5-3.5%
on precious metals, and 2% on all other products, over
111 claims. The vast majority of the CV13 Spodumene
Pegmatite, as is currently delineated, is not subject to a
royalty.
The Property does not overlap any atypically sensitive
environmental areas or parks, or historical sites to the
knowledge of the Company. There are no known
hinderances to operating at the Property, apart from the
goose harvesting season (typically mid-April to mid-
May) where the communities request helicopter flying
not be completed, and potentially wildfires depending
on the season, scale, and location.
Claim expiry dates range from September 2024 to
September 2026.

Exploration done
by other parties

Acknowledgment and appraisal of
exploration by other parties.

No core assay results from other parties are disclosed
herein.
The most recent independent Property review was a
technical report titled "NI 43-101 Technical Report,
Mineral Resource Estimate for the CV5 Pegmatite,
Corvette Property, James Bay Region, Québec,
Canada", by Todd McCracken, P.Geo., of BBA
Engineering Ltd., and Ryan Cunningham, M.Eng.,
P.Eng., of Primero Group Americas Inc., Effective Date
of June 25, 2023, and Issue Date of September 8, 2023.

Geology

Deposit type, geological setting and
style of mineralization.

The Property overlies a large portion of the Lac Guyer
Greenstone Belt, considered part of the larger La
Grande River Greenstone Belt and is dominated by
volcanic rocks metamorphosed to amphibolite facies.
The claim block is dominantly host to rocks of the
Guyer Group (amphibolite, iron formation,
intermediate to mafic volcanics, peridotite, pyroxenite,
komatiite, as well as felsic volcanics). The amphibolite
rocks that trend east-west (generally steeply south
dipping) through this region are bordered to the north
by the Magin Formation (conglomerate and wacke) and
to the south by an assemblage of tonalite, granodiorite,
and diorite, in addition to metasediments of the Marbot
Group (conglomerate, wacke). Several regional-scale
Proterozoic gabbroic dykes also cut through portions of
the Property (Lac Spirt Dykes, Senneterre Dykes).
The geological setting is prospective for gold, silver,
base metals, platinum group elements, and lithium over
several different deposit styles including orogenic gold
(Au), volcanogenic massive sulfide (Cu, Au, Ag),
komatiite-ultramafic (Au, Ag, PGE, Ni, Cu, Co), and
pegmatite (Li, Ta).
Exploration of the Property has outlined three primary
mineral exploration trends crossing dominantly east-
west over large portions of the Property – Golden Trend
(gold), Maven Trend (copper, gold, silver), and CV
Trend (lithium, tantalum). The CV5 and CV13
spodumene pegmatites are situated within the CV
Trend. Lithium mineralization at the Property,
including at CV5, CV13, and CV9, is observed to occur
within quartz-feldspar pegmatite, which may be
exposed at surface as high relief 'whale-back'
landforms. The pegmatite is often very coarse-grained
and off-white in appearance, with darker sections
commonly composed of mica and smoky quartz, and
occasional tourmaline.
The lithium pegmatites at Corvette are categorized as
LCT Pegmatites. Core assays and ongoing
mineralogical studies, coupled with field mineral
identification and assays, indicate spodumene as the
dominant lithium-bearing mineral on the Property, with
no significant petalite, lepidolite, lithium-phosphate
minerals, or apatite present. The pegmatites also carry
significant tantalum values with tantalite indicated to be
the mineral phase.

Drill hole
Information

A summary of all information material
to the understanding of the exploration
results including a tabulation of the
following information for all Material
drill holes:
- easting and northing of the drill hole
  collar
- elevation or RL (Reduced Level –
  elevation above sea level in metres) of
  the drill hole collar
- dip and azimuth of the hole
- down hole length and interception
  depth
- hole length.
If the exclusion of this information is
justified on the basis that the
information is not Material and this
exclusion does not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.

Drill hole attribute information is included in a table
herein.
Pegmatite intersections of <2 m are not typically
presented as they are considered insignificant.

Data aggregation
methods

In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (eg cutting of high grades)
and cut-off grades are usually Material
and should be stated.
Where aggregate intercepts incorporate
short lengths of high grade results and
longer lengths of low grade results, the
procedure used for such aggregation
should be stated and some typical
examples of such aggregations should
be shown in detail.
The assumptions used for any reporting
of metal equivalent values should be
clearly stated.

N/A, no assay data presented.

Relationship
between
mineralization
widths and intercept
lengths

These relationships are particularly
important in the reporting of
Exploration Results.
If the geometry of the mineralization
with respect to the drill hole angle is
known, its nature should be reported.
If it is not known and only the down
hole lengths are reported, there should
be a clear statement to this effect (eg '
down hole length, true width not
known').

Geological modelling is ongoing on a hole-by-hole
basis and as assays are received. However, current
interpretation indicates CV9 is comprised of a single
principal dyke, which outcrops at surface, has a steep
northerly dip, and is moderately plunging to the east-
southeast. A strike length of 450 m has been delineated
through drilling and outcrop.
All reported widths are core length. True widths are not
calculated for each hole due to the relatively wide drill
spacing at this stage of delineation and the typical
irregular nature of pegmatite, as well as the varied drill
hole orientations. As such, true widths may vary widely
from hole to hole.

Diagrams

Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported These should
include, but not be limited to a plan
view of drill hole collar locations and
appropriate sectional views.

Please refer to the figures included herein as well as
those posted on the Company's website.

Balanced reporting

Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and
high grades and/or widths should be
practiced to avoid misleading reporting
of Exploration Results.

Please refer to the table(s) included herein as well as
those posted on the Company's website.
Results for pegmatite intervals <2 m are not reported.

Other substantive
exploration data

Other exploration data, if meaningful
and material, should be reported
including (but not limited to):
geological observations; geophysical
survey results; geochemical survey
results; bulk samples – size and method
of treatment; metallurgical test results;
bulk density, groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.

The Company is currently completing baseline
environmental work over the CV5 and CV13 pegmatite
area. No endangered flora or fauna have been
documented over the Property to date, and several sites
have been identified as potentially suitable for mine
infrastructure.
The Company has completed a bathymetric survey over
the shallow glacial lake which overlies a portion of the
CV5 Spodumene Pegmatite. The lake depth ranges
from <2 m to approximately 18 m, although the
majority of the CV5 Spodumene Pegmatite, as
delineated to date, is overlain by typically <2 to 10 m of
water.
The Company has completed preliminary metallurgical
testing comprised of HLS and magnetic testing, which
has produced 6+% Li2O spodumene concentrates at
>70% recovery on both CV5 and CV13 pegmatite
material, indicating DMS as a viable primary process
approach, and that both CV5 and CV13 could
potentially feed the same process plant. A DMS test on
CV5 Spodumene Pegmatite material returned a
spodumene concentrate grading 5.8% Li2O at 79%
recovery, strongly indicating potential for a DMS only
operation to be applicable.
Various mandates required for advancing the Project
towards economic studies have been initiated, including
but not limited to, environmental baseline, metallurgy,
geomechanics, hydrogeology, hydrology, stakeholder
engagement, geochemical characterization, as well as
transportation and logistical studies.

Further work

The nature and scale of planned further
work (eg tests for lateral extensions or
depth extensions or large-scale step-out
drilling).
Diagrams clearly highlighting the areas
of possible extensions, including the
main geological interpretations and
future drilling areas, provided this
information is not commercially
sensitive.

The Company intends to continue drilling the
pegmatites of the Corvette Property, focused on the
CV5 Spodumene Pegmatite and adjacent subordinate
lenses, as well as the CV13 Spodumene Pegmatite. A
follow-up drill program at the CV9 Spodumene
Pegmatite is anticipated following receipt of assays.