News -!! MORE gold & copper...
July 18, 2012 08:00 ET
GoldQuest Reports Assay Results From the Second Hole at Romero, Dominican Republic; Includes 159 Metres Grading 4.5 g/t Gold and 1% Copper and 24 Metres Grading 7.5 g/t Gold and 0.9% Copper
VANCOUVER, BRITISH COLUMBIA--(Marketwire - July 18, 2012) - GoldQuest Mining Corp. (TSX VENTURE:GQC)(FRANKFURT:M1W)(BERLIN:M1W) ("GoldQuest" or the "Company") is pleased to announce the assay results of hole LTP 92, the second vertical hole into the Romero discovery, within the Company's 100% owned Las Tres Palmas trend in the Dominican Republic. The location is 25 metres to the west and 4 metres lower in elevation than the discovery hole LTP 90, which returned 231 metres grading 2.4 grams per tonne (g/t) gold (see release of May 29, 2012). Hole LTP 92 displayed similar characteristics to hole LTP 90, with an upper gold unit from 28 metres below surface, with low copper and some zinc, followed by deeper, higher grade gold and copper horizons at depth. The highlights of Hole LTP 92 were 159 metres grading 4.45 g/t gold from 212.5 metres to 372 metres, including a sub interval of 75.5 metres grading 9.01 g/t gold and 1.06% copper. A higher horizon from 120 metres to 144 metres returned 24 metres grading 7.5 g/t gold and 0.86% copper. The hole was continued until the portable drill rig could drill no further and was terminated at 399 metres. Gold was present from 24 metres to the bottom of the hole, with certain horizons displaying enrichment in gold and base metals.
"Results from hole LTP 92 are a significant addition to our understanding of the Romero mineralization, and extends at depth 138 metres below the initial discovery hole," commented Julio Espaillat, GoldQuest's CEO. "The two drill rigs have completed holes 93, 94 and 95 and drilling of 96 and 97 is in progress. Deep drilling with portable rigs is slower than normal, but is providing us valuable insight to the geometry of the deposit."
The potential quantity and grade of the mineralization is currently conceptual in nature, there has been insufficient exploration to define a mineral resource and it is uncertain if further exploration will result in the target being delineated as a mineral resource.
The individual assay intervals from the complete hole can be reviewed on GoldQuest's website at the below link.
https://www.goldquestcorp.com/pdf/news/LTP-92_AssayTable.pdf
The results and sub intervals are summarized in Table 1 below. The results reported have a bottom cut-off of 0.15 g/t gold. There is insufficient data to establish a specific top cut-off; however, in Table 1, an arbitrary top cut of 50 g/t gold has been used for the calculations, with the adjusted gold grade noted (refer to the link below for information with respect to the location, elevation, azimuth and depth of the holes).
https://www.goldquestcorp.com/images/nr/NEWROMERO.jpg
Cut off 0.15ppm Au |
From (m) |
To (m) |
Interval (m) |
Au_ppm |
Cu_% |
Au_ppm (High value cut 50ppm) |
28.2 |
82.0 |
53.8 |
0.63 |
0.02 |
0.63 |
120.0 |
144.0 |
24.0 |
7.50 |
0.86 |
6.88 |
212.5 |
372.0 |
159.5 |
4.45 |
0.95 |
4.14 |
Including |
|
|
|
212.5 |
288.0 |
75.5 |
9.01 |
1.06 |
8.35 |
Including |
|
|
|
243.9 |
288.0 |
44.1 |
15.03 |
1.43 |
13.9 |
Including |
|
|
|
320.0 |
346.0 |
26.0 |
0.54 |
2.04 |
0.54 |